Failed
gprs:oc2g+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=8036): Process ended prematurely: osmo-stp_10.42.42.5(pid=8036) [trial-2360↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8036)]
Standard Output
---------------------------------------------- trial-2360 gprs:oc2g+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 13:01:46.034954 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:01:46.047286 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 13:01:46.198057 tst cs_paging_gprs_active.py: using LAC 21636 13:01:46.331461 tst cs_paging_gprs_active.py: using RAC 216 13:01:46.458409 tst cs_paging_gprs_active.py: using CellId 21636 13:01:46.617655 tst cs_paging_gprs_active.py: using BVCI 21637 13:01:46.653695 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:01:46.669867 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:01:46.680774 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:01:46.692442 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:01:46.703844 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:01:46.715459 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:01:46.726975 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:01:46.739267 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:01:46.751271 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 13:01:46.887262 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 13:01:47.203113 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:01:47.344245 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:01:47.686268 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8026): Launched 13:01:47.968183 run iperf3-srv_10.42.42.10(pid=8027): Launched 13:01:48.170308 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:01:48.308268 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:01:48.647840 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8028): Launched 13:01:48.930396 run iperf3-srv_10.42.42.10(pid=8029): Launched 13:01:49.131564 tst cs_paging_gprs_active.py:38: start network... 13:01:49.268771 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:01:49.785739 run create_hlr_db(pid=8030): Launched 13:01:49.975655 bus /gobi_6: Setting Powered False 13:01:50.996145 run create_hlr_db(pid=8030): Terminated: ok {rc=0} 13:01:51.410023 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8032): Launched 13:01:51.720172 run osmo-hlr_10.42.42.2(pid=8033): Launched 13:01:51.842414 run osmo-stp_10.42.42.5: Starting osmo-stp 13:01:52.382963 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8035): Launched 13:01:52.691920 run osmo-stp_10.42.42.5(pid=8036): Launched 13:01:52.804058 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:01:53.339782 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8038): Launched 13:01:53.450289 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:01:53.719150 run patchelf(pid=8039): Launched 13:01:53.899305 run osmo-stp_10.42.42.5(pid=8036): ERR: Terminated: ERROR {rc=1} [trial-2360↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8036)] 13:01:54.031348 run osmo-stp_10.42.42.5(pid=8036): stdout: | (launched: 2022-12-09_13:01:52.539790) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:01:54.163460 run osmo-stp_10.42.42.5(pid=8036): stderr: | �[0;m�[38;5;43m20221209130152711 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209130152712 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209130152712 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209130152712 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209130152713 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209130152713 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209130152713 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:01:54.291288 run osmo-stp_10.42.42.5(pid=8036): stdout: | (launched: 2022-12-09_13:01:52.539790) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:01:54.417672 run osmo-stp_10.42.42.5(pid=8036): stderr: | �[0;m�[38;5;43m20221209130152711 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209130152712 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209130152712 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209130152712 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209130152713 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209130152713 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209130152713 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:01:54.564096 run patchelf(pid=8039): Terminating (SIGINT) 13:01:54.736341 run patchelf(pid=8039): Terminated: ok {rc=0} 13:01:54.767971 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=8036): Process ended prematurely: osmo-stp_10.42.42.5(pid=8036) [trial-2360↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8036)] [trial-2360↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 13:01:54.777183 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 13:01:54.837099 run osmo-hlr_10.42.42.2(pid=8033): ERR: Terminated: ERROR {rc=237} [trial-2360↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8033)] 13:01:54.886149 run osmo-hlr_10.42.42.2(pid=8033): stdout: | (launched: 2022-12-09_13:01:51.567127) 13:01:54.935867 run osmo-hlr_10.42.42.2(pid=8033): stderr: | �[0;m�[1;31m20221209130151746 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209130151746 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209130151746 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209130151746 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209130151746 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209130151746 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209130151759 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2360/run.2022-12-09_12-45-57/gprs:oc2g+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209130151768 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209130151768 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209130151768 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:01:54.978058 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8026): Terminating (SIGTERM) 13:01:55.017824 run iperf3-srv_10.42.42.10(pid=8027): Terminating (SIGTERM) 13:01:55.057610 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8028): Terminating (SIGTERM) 13:01:55.097166 run iperf3-srv_10.42.42.10(pid=8029): Terminating (SIGTERM) 13:01:55.137477 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8032): Terminating (SIGTERM) 13:01:55.177113 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8035): Terminating (SIGTERM) 13:01:55.216602 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8038): Terminating (SIGTERM) 13:01:55.225711 --- ParallelTerminationStrategy: PID 8026 died... 13:01:55.278835 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8026): Terminated: ok {rc=0} 13:01:55.288328 --- ParallelTerminationStrategy: PID 8027 died... 13:01:55.341280 run iperf3-srv_10.42.42.10(pid=8027): Terminated {rc=256} 13:01:55.350637 --- ParallelTerminationStrategy: PID 8028 died... 13:01:55.403773 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8028): Terminated: ok {rc=0} 13:01:55.413288 --- ParallelTerminationStrategy: PID 8029 died... 13:01:55.466271 run iperf3-srv_10.42.42.10(pid=8029): Terminated {rc=256} 13:01:55.475672 --- ParallelTerminationStrategy: PID 8032 died... 13:01:55.528612 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8032): Terminated: ok {rc=0} 13:01:55.538124 --- ParallelTerminationStrategy: PID 8035 died... 13:01:55.590940 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8035): Terminated: ok {rc=0} 13:01:55.600408 --- ParallelTerminationStrategy: PID 8038 died... 13:01:55.653337 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8038): Terminated: ok {rc=0} 13:01:55.742010 bus /gobi_0: Setting Powered False 13:01:56.846130 bus /gobi_0: Setting Powered False 13:01:57.954085 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8036): Process ended prematurely: osmo-stp_10.42.42.5(pid=8036) [trial-2360↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8036)]