Failed
gprs:trx-umtrx+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=10442): Process ended prematurely: osmo-stp_10.42.42.5(pid=10442) [trial-2360↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10442)]
Standard Output
---------------------------------------------- trial-2360 gprs:trx-umtrx+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 13:28:40.004767 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:28:40.015790 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 13:28:40.172606 tst cs_paging_gprs_active.py: using LAC 21778 13:28:40.292412 tst cs_paging_gprs_active.py: using RAC 103 13:28:40.412426 tst cs_paging_gprs_active.py: using CellId 21778 13:28:40.532134 tst cs_paging_gprs_active.py: using BVCI 21779 13:28:40.555010 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:28:40.565953 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:28:40.576623 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:28:40.587423 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:28:40.598160 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:28:40.608747 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:28:40.619678 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:28:40.630427 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:28:40.641423 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 13:28:40.760073 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 13:28:41.038780 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:28:41.163098 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:28:41.470675 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10432): Launched 13:28:41.727269 run iperf3-srv_10.42.42.10(pid=10433): Launched 13:28:41.909004 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:28:42.033144 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:28:42.343250 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10434): Launched 13:28:42.600016 run iperf3-srv_10.42.42.10(pid=10435): Launched 13:28:42.781081 tst cs_paging_gprs_active.py:38: start network... 13:28:42.905356 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:28:43.383762 run create_hlr_db(pid=10436): Launched 13:28:43.554493 bus /gobi_6: Setting Powered False 13:28:44.577631 run create_hlr_db(pid=10436): Terminated: ok {rc=0} 13:28:45.000200 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10438): Launched 13:28:45.319621 run osmo-hlr_10.42.42.2(pid=10439): Launched 13:28:45.438690 run osmo-stp_10.42.42.5: Starting osmo-stp 13:28:46.022436 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10441): Launched 13:28:46.448860 run osmo-stp_10.42.42.5(pid=10442): Launched 13:28:46.659837 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:28:47.282960 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10444): Launched 13:28:47.400744 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:28:47.678766 run patchelf(pid=10445): Launched 13:28:47.864904 run osmo-stp_10.42.42.5(pid=10442): ERR: Terminated: ERROR {rc=1} [trial-2360↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10442)] 13:28:48.000834 run osmo-stp_10.42.42.5(pid=10442): stdout: | (launched: 2022-12-09_13:28:46.197948) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:28:48.137514 run osmo-stp_10.42.42.5(pid=10442): stderr: | �[0;m�[38;5;43m20221209132846495 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209132846496 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209132846496 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209132846496 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209132846497 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209132846497 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209132846497 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:28:48.269650 run osmo-stp_10.42.42.5(pid=10442): stdout: | (launched: 2022-12-09_13:28:46.197948) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:28:48.400634 run osmo-stp_10.42.42.5(pid=10442): stderr: | �[0;m�[38;5;43m20221209132846495 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209132846496 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209132846496 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209132846496 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209132846497 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209132846497 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209132846497 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:28:48.552127 run patchelf(pid=10445): Terminating (SIGINT) 13:28:48.729802 run patchelf(pid=10445): Terminated: ok {rc=0} 13:28:48.762525 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=10442): Process ended prematurely: osmo-stp_10.42.42.5(pid=10442) [trial-2360↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10442)] [trial-2360↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 13:28:48.772473 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 13:28:48.835629 run osmo-hlr_10.42.42.2(pid=10439): ERR: Terminated: ERROR {rc=237} [trial-2360↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10439)] 13:28:48.886806 run osmo-hlr_10.42.42.2(pid=10439): stdout: | (launched: 2022-12-09_13:28:45.162355) 13:28:48.938808 run osmo-hlr_10.42.42.2(pid=10439): stderr: | �[0;m�[1;31m20221209132845360 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209132845360 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209132845360 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209132845360 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209132845360 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209132845360 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209132845372 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2360/run.2022-12-09_12-45-57/gprs:trx-umtrx+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209132845381 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209132845381 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209132845381 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:28:48.982663 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10432): Terminating (SIGTERM) 13:28:49.024435 run iperf3-srv_10.42.42.10(pid=10433): Terminating (SIGTERM) 13:28:49.068095 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10434): Terminating (SIGTERM) 13:28:49.109554 run iperf3-srv_10.42.42.10(pid=10435): Terminating (SIGTERM) 13:28:49.151436 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10438): Terminating (SIGTERM) 13:28:49.192917 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10441): Terminating (SIGTERM) 13:28:49.234749 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10444): Terminating (SIGTERM) 13:28:49.244345 --- ParallelTerminationStrategy: PID 10432 died... 13:28:49.300894 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10432): Terminated: ok {rc=0} 13:28:49.310977 --- ParallelTerminationStrategy: PID 10433 died... 13:28:49.366700 run iperf3-srv_10.42.42.10(pid=10433): Terminated {rc=256} 13:28:49.376713 --- ParallelTerminationStrategy: PID 10434 died... 13:28:49.432262 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10434): Terminated: ok {rc=0} 13:28:49.442382 --- ParallelTerminationStrategy: PID 10435 died... 13:28:49.497683 run iperf3-srv_10.42.42.10(pid=10435): Terminated {rc=256} 13:28:49.507884 --- ParallelTerminationStrategy: PID 10438 died... 13:28:49.563551 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10438): Terminated: ok {rc=0} 13:28:49.573906 --- ParallelTerminationStrategy: PID 10441 died... 13:28:49.629912 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10441): Terminated: ok {rc=0} 13:28:49.639930 --- ParallelTerminationStrategy: PID 10444 died... 13:28:49.695551 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10444): Terminated: ok {rc=0} 13:28:49.781209 bus /gobi_0: Setting Powered False 13:28:50.888308 bus /gobi_0: Setting Powered False 13:28:52.000001 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10442): Process ended prematurely: osmo-stp_10.42.42.5(pid=10442) [trial-2360↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10442)]