Failed
gprs:sysmo.cs_paging_gprs_active.py (from gprs_sysmo)
Stacktrace
osmo-stp_10.42.42.5(pid=28684): Process ended prematurely: osmo-stp_10.42.42.5(pid=28684) [trial-2366↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28684)]
Standard Output
---------------------------------------------- trial-2366 gprs:sysmo cs_paging_gprs_active.py ---------------------------------------------- 23:17:24.678836 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 23:17:24.689696 tst gprs:sysmo: Using 1 x bts (candidates: 1) 23:17:24.819042 tst cs_paging_gprs_active.py: using LAC 24350 23:17:24.943209 tst cs_paging_gprs_active.py: using RAC 125 23:17:25.069243 tst cs_paging_gprs_active.py: using CellId 24350 23:17:25.193426 tst cs_paging_gprs_active.py: using BVCI 24351 23:17:25.217902 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 23:17:25.228589 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 23:17:25.239346 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 23:17:25.250315 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 23:17:25.261347 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 23:17:25.272180 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 23:17:25.283178 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 23:17:25.294101 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 23:17:25.305195 tst gprs:sysmo: Using 1 x modem (candidates: 4) 23:17:25.421345 tst gprs:sysmo: Using 1 x modem (candidates: 4) 23:17:25.695779 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 23:17:25.821371 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:17:26.128596 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28674): Launched 23:17:26.385135 run iperf3-srv_10.42.42.10(pid=28675): Launched 23:17:26.566714 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 23:17:26.690261 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:17:26.995971 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28676): Launched 23:17:27.250737 run iperf3-srv_10.42.42.10(pid=28677): Launched 23:17:27.431897 tst cs_paging_gprs_active.py:38: start network... 23:17:27.555868 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:17:28.030412 run create_hlr_db(pid=28678): Launched 23:17:28.200773 bus /sierra_2: Setting Powered False 23:17:29.222184 run create_hlr_db(pid=28678): Terminated: ok {rc=0} 23:17:29.644622 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28680): Launched 23:17:29.962884 run osmo-hlr_10.42.42.2(pid=28681): Launched 23:17:30.082910 run osmo-stp_10.42.42.5: Starting osmo-stp 23:17:30.636855 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28683): Launched 23:17:31.092940 run osmo-stp_10.42.42.5(pid=28684): Launched 23:17:31.296243 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:17:32.817700 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28686): Launched 23:17:32.923238 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:17:33.185253 run patchelf(pid=28687): Launched 23:17:33.358705 run osmo-stp_10.42.42.5(pid=28684): ERR: Terminated: ERROR {rc=1} [trial-2366↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28684)] 23:17:33.485681 run osmo-stp_10.42.42.5(pid=28684): stdout: | (launched: 2022-12-09_23:17:30.799047) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:17:33.612737 run osmo-stp_10.42.42.5(pid=28684): stderr: | �[0;m�[38;5;43m20221209231731052 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209231731052 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209231731052 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209231731057 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209231731058 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209231731058 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209231731058 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:17:33.735807 run osmo-stp_10.42.42.5(pid=28684): stdout: | (launched: 2022-12-09_23:17:30.799047) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:17:33.857087 run osmo-stp_10.42.42.5(pid=28684): stderr: | �[0;m�[38;5;43m20221209231731052 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209231731052 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209231731052 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209231731057 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209231731058 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209231731058 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209231731058 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:17:33.998859 run patchelf(pid=28687): Terminating (SIGINT) 23:17:34.166125 run patchelf(pid=28687): Terminated: ok {rc=0} 23:17:34.196704 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=28684): Process ended prematurely: osmo-stp_10.42.42.5(pid=28684) [trial-2366↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28684)] [trial-2366↪gprs:sysmo↪cs_paging_gprs_active.py:38] 23:17:34.205928 tst cs_paging_gprs_active.py:38: Test FAILED (9.6 sec) 23:17:34.265604 run osmo-hlr_10.42.42.2(pid=28681): ERR: Terminated: ERROR {rc=237} [trial-2366↪gprs:sysmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28681)] 23:17:34.314631 run osmo-hlr_10.42.42.2(pid=28681): stdout: | (launched: 2022-12-09_23:17:29.807077) 23:17:34.364087 run osmo-hlr_10.42.42.2(pid=28681): stderr: | �[0;m�[1;31m20221209231730005 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209231730006 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209231730006 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209231730006 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209231730006 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209231730006 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209231730017 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2366/run.2022-12-09_23-11-33/gprs:sysmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209231730026 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209231730026 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209231730026 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:17:34.405961 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28674): Terminating (SIGTERM) 23:17:34.445322 run iperf3-srv_10.42.42.10(pid=28675): Terminating (SIGTERM) 23:17:34.484767 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28676): Terminating (SIGTERM) 23:17:34.524039 run iperf3-srv_10.42.42.10(pid=28677): Terminating (SIGTERM) 23:17:34.563491 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28680): Terminating (SIGTERM) 23:17:34.603540 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28683): Terminating (SIGTERM) 23:17:34.642983 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28686): Terminating (SIGTERM) 23:17:34.652088 --- ParallelTerminationStrategy: PID 28674 died... 23:17:34.704875 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28674): Terminated: ok {rc=0} 23:17:34.714474 --- ParallelTerminationStrategy: PID 28675 died... 23:17:34.767011 run iperf3-srv_10.42.42.10(pid=28675): Terminated {rc=256} 23:17:34.776417 --- ParallelTerminationStrategy: PID 28676 died... 23:17:34.829044 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28676): Terminated: ok {rc=0} 23:17:34.838631 --- ParallelTerminationStrategy: PID 28677 died... 23:17:34.890909 run iperf3-srv_10.42.42.10(pid=28677): Terminated {rc=256} 23:17:34.900207 --- ParallelTerminationStrategy: PID 28680 died... 23:17:34.953074 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28680): Terminated: ok {rc=0} 23:17:34.962623 --- ParallelTerminationStrategy: PID 28683 died... 23:17:35.015247 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28683): Terminated: ok {rc=0} 23:17:35.025468 --- ParallelTerminationStrategy: PID 28686 died... 23:17:35.078712 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28686): Terminated: ok {rc=0} 23:17:35.167496 bus /gobi_0: Setting Powered False 23:17:36.269064 bus /gobi_0: Setting Powered False 23:17:37.380252 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28684): Process ended prematurely: osmo-stp_10.42.42.5(pid=28684) [trial-2366↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28684)]