Failed
gprs:trx-lms+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=32625): Process ended prematurely: osmo-stp_10.42.42.5(pid=32625) [trial-2366↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32625)]
Standard Output
---------------------------------------------- trial-2366 gprs:trx-lms+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 00:00:35.692811 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:00:35.704067 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 00:00:35.845339 tst cs_paging_gprs_active.py: using LAC 24581 00:00:35.961651 tst cs_paging_gprs_active.py: using RAC 101 00:00:36.085753 tst cs_paging_gprs_active.py: using CellId 24581 00:00:36.210017 tst cs_paging_gprs_active.py: using BVCI 24582 00:00:36.234477 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:00:36.245790 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:00:36.256754 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:00:36.268035 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:00:36.279258 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:00:36.290457 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:00:36.302168 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:00:36.313341 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:00:36.324682 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 00:00:36.443392 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 00:00:36.727629 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:00:36.862536 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:00:37.193430 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32615): Launched 00:00:37.468612 run iperf3-srv_10.42.42.10(pid=32616): Launched 00:00:37.665742 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:00:37.799472 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:00:38.131297 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32617): Launched 00:00:38.406884 run iperf3-srv_10.42.42.10(pid=32618): Launched 00:00:38.604102 tst cs_paging_gprs_active.py:38: start network... 00:00:38.738492 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:00:39.240464 run create_hlr_db(pid=32619): Launched 00:00:39.425211 bus /gobi_6: Setting Powered False 00:00:40.447495 run create_hlr_db(pid=32619): Terminated: ok {rc=0} 00:00:40.848568 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32621): Launched 00:00:41.147451 run osmo-hlr_10.42.42.2(pid=32622): Launched 00:00:41.263366 run osmo-stp_10.42.42.5: Starting osmo-stp 00:00:41.788482 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32624): Launched 00:00:42.087279 run osmo-stp_10.42.42.5(pid=32625): Launched 00:00:42.195957 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:00:42.715050 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32627): Launched 00:00:42.821423 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:00:43.081538 run patchelf(pid=32628): Launched 00:00:43.259103 run osmo-stp_10.42.42.5(pid=32625): ERR: Terminated: ERROR {rc=1} [trial-2366↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32625)] 00:00:43.387383 run osmo-stp_10.42.42.5(pid=32625): stdout: | (launched: 2022-12-10_00:00:41.940706) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:00:43.516036 run osmo-stp_10.42.42.5(pid=32625): stderr: | �[0;m�[38;5;43m20221210000042111 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210000042112 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210000042112 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210000042112 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210000042113 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210000042113 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210000042113 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:00:43.639909 run osmo-stp_10.42.42.5(pid=32625): stdout: | (launched: 2022-12-10_00:00:41.940706) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:00:43.762568 run osmo-stp_10.42.42.5(pid=32625): stderr: | �[0;m�[38;5;43m20221210000042111 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210000042112 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210000042112 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210000042112 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210000042113 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210000042113 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210000042113 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:00:43.905626 run patchelf(pid=32628): Terminating (SIGINT) 00:00:44.073958 run patchelf(pid=32628): Terminated: ok {rc=0} 00:00:44.104932 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=32625): Process ended prematurely: osmo-stp_10.42.42.5(pid=32625) [trial-2366↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32625)] [trial-2366↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 00:00:44.114245 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 00:00:44.173295 run osmo-hlr_10.42.42.2(pid=32622): ERR: Terminated: ERROR {rc=237} [trial-2366↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=32622)] 00:00:44.221575 run osmo-hlr_10.42.42.2(pid=32622): stdout: | (launched: 2022-12-10_00:00:41.000251) 00:00:44.270468 run osmo-hlr_10.42.42.2(pid=32622): stderr: | �[0;m�[1;31m20221210000041176 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210000041176 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210000041176 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210000041176 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210000041176 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210000041176 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210000041188 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2366/run.2022-12-09_23-11-33/gprs:trx-lms+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210000041197 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210000041197 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210000041197 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:00:44.312073 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32615): Terminating (SIGTERM) 00:00:44.351158 run iperf3-srv_10.42.42.10(pid=32616): Terminating (SIGTERM) 00:00:44.394714 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32617): Terminating (SIGTERM) 00:00:44.435821 run iperf3-srv_10.42.42.10(pid=32618): Terminating (SIGTERM) 00:00:44.477404 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32621): Terminating (SIGTERM) 00:00:44.518899 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32624): Terminating (SIGTERM) 00:00:44.560616 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32627): Terminating (SIGTERM) 00:00:44.570530 --- ParallelTerminationStrategy: PID 32615 died... 00:00:44.626871 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32615): Terminated: ok {rc=0} 00:00:44.636858 --- ParallelTerminationStrategy: PID 32616 died... 00:00:44.692388 run iperf3-srv_10.42.42.10(pid=32616): Terminated {rc=256} 00:00:44.702387 --- ParallelTerminationStrategy: PID 32617 died... 00:00:44.757820 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32617): Terminated: ok {rc=0} 00:00:44.768202 --- ParallelTerminationStrategy: PID 32618 died... 00:00:44.823619 run iperf3-srv_10.42.42.10(pid=32618): Terminated {rc=256} 00:00:44.833958 --- ParallelTerminationStrategy: PID 32621 died... 00:00:44.889514 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32621): Terminated: ok {rc=0} 00:00:44.899608 --- ParallelTerminationStrategy: PID 32624 died... 00:00:44.955041 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32624): Terminated: ok {rc=0} 00:00:44.965423 --- ParallelTerminationStrategy: PID 32627 died... 00:00:45.020795 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32627): Terminated: ok {rc=0} 00:00:45.106317 bus /gobi_0: Setting Powered False 00:00:46.218855 bus /gobi_0: Setting Powered False 00:00:47.323897 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=32625): Process ended prematurely: osmo-stp_10.42.42.5(pid=32625) [trial-2366↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32625)]