Failed
gprs:nanobts+band-1900.cs_paging_gprs_active.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=10116): Process ended prematurely: osmo-stp_10.42.42.5(pid=10116) [trial-2367↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10116)]
Standard Output
---------------------------------------------- trial-2367 gprs:nanobts+band-1900 cs_paging_gprs_active.py ---------------------------------------------- 01:43:19.095565 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:43:19.106601 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 01:43:19.238487 tst cs_paging_gprs_active.py: using LAC 25117 01:43:19.365707 tst cs_paging_gprs_active.py: using RAC 127 01:43:19.492193 tst cs_paging_gprs_active.py: using CellId 25117 01:43:19.618444 tst cs_paging_gprs_active.py: using BVCI 25118 01:43:19.643186 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:43:19.654311 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:43:19.665208 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:43:19.676162 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:43:19.687080 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:43:19.697916 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:43:19.708895 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:43:19.719665 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:43:19.730867 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 01:43:19.845264 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 01:43:20.138807 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:43:20.273970 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:43:20.608669 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10106): Launched 01:43:20.889644 run iperf3-srv_10.42.42.10(pid=10107): Launched 01:43:21.087715 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:43:21.223275 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:43:21.560164 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10108): Launched 01:43:21.840116 run iperf3-srv_10.42.42.10(pid=10109): Launched 01:43:22.038288 tst cs_paging_gprs_active.py:38: start network... 01:43:22.173251 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:43:22.693424 run create_hlr_db(pid=10110): Launched 01:43:22.879552 bus /sierra_2: Setting Powered False 01:43:23.901333 run create_hlr_db(pid=10110): Terminated: ok {rc=0} 01:43:24.332288 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10112): Launched 01:43:24.656931 run osmo-hlr_10.42.42.2(pid=10113): Launched 01:43:24.777937 run osmo-stp_10.42.42.5: Starting osmo-stp 01:43:25.340467 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10115): Launched 01:43:25.666079 run osmo-stp_10.42.42.5(pid=10116): Launched 01:43:25.782930 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:43:26.350383 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10118): Launched 01:43:26.466936 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:43:26.751530 run patchelf(pid=10119): Launched 01:43:26.940830 run osmo-stp_10.42.42.5(pid=10116): ERR: Terminated: ERROR {rc=1} [trial-2367↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10116)] 01:43:27.079131 run osmo-stp_10.42.42.5(pid=10116): stdout: | (launched: 2022-12-10_01:43:25.505268) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:43:27.217640 run osmo-stp_10.42.42.5(pid=10116): stderr: | �[0;m�[38;5;43m20221210014325699 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210014325700 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210014325700 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210014325700 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210014325701 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210014325701 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210014325701 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:43:27.352075 run osmo-stp_10.42.42.5(pid=10116): stdout: | (launched: 2022-12-10_01:43:25.505268) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:43:27.484871 run osmo-stp_10.42.42.5(pid=10116): stderr: | �[0;m�[38;5;43m20221210014325699 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210014325700 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210014325700 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210014325700 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210014325701 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210014325701 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210014325701 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:43:27.639202 run patchelf(pid=10119): Terminating (SIGINT) 01:43:27.820293 run patchelf(pid=10119): Terminated: ok {rc=0} 01:43:27.853897 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=10116): Process ended prematurely: osmo-stp_10.42.42.5(pid=10116) [trial-2367↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10116)] [trial-2367↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38] 01:43:27.863739 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 01:43:27.926432 run osmo-hlr_10.42.42.2(pid=10113): ERR: Terminated: ERROR {rc=237} [trial-2367↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10113)] 01:43:27.977422 run osmo-hlr_10.42.42.2(pid=10113): stdout: | (launched: 2022-12-10_01:43:24.497264) 01:43:28.029054 run osmo-hlr_10.42.42.2(pid=10113): stderr: | �[0;m�[1;31m20221210014324697 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210014324697 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210014324697 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210014324697 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210014324697 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210014324697 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210014324710 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2367/run.2022-12-10_00-40-00/gprs:nanobts+band-1900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210014324718 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210014324718 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210014324719 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:43:28.073606 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10106): Terminating (SIGTERM) 01:43:28.115202 run iperf3-srv_10.42.42.10(pid=10107): Terminating (SIGTERM) 01:43:28.156598 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10108): Terminating (SIGTERM) 01:43:28.197988 run iperf3-srv_10.42.42.10(pid=10109): Terminating (SIGTERM) 01:43:28.239513 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10112): Terminating (SIGTERM) 01:43:28.280912 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10115): Terminating (SIGTERM) 01:43:28.322433 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10118): Terminating (SIGTERM) 01:43:28.332480 --- ParallelTerminationStrategy: PID 10106 died... 01:43:28.388188 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10106): Terminated: ok {rc=0} 01:43:28.398263 --- ParallelTerminationStrategy: PID 10107 died... 01:43:28.454022 run iperf3-srv_10.42.42.10(pid=10107): Terminated {rc=256} 01:43:28.464018 --- ParallelTerminationStrategy: PID 10108 died... 01:43:28.519461 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10108): Terminated: ok {rc=0} 01:43:28.529571 --- ParallelTerminationStrategy: PID 10109 died... 01:43:28.584663 run iperf3-srv_10.42.42.10(pid=10109): Terminated {rc=256} 01:43:28.594649 --- ParallelTerminationStrategy: PID 10112 died... 01:43:28.649899 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10112): Terminated: ok {rc=0} 01:43:28.659886 --- ParallelTerminationStrategy: PID 10115 died... 01:43:28.715087 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10115): Terminated: ok {rc=0} 01:43:28.725150 --- ParallelTerminationStrategy: PID 10118 died... 01:43:28.780673 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10118): Terminated: ok {rc=0} 01:43:28.867097 bus /gobi_0: Setting Powered False 01:43:29.972910 bus /gobi_0: Setting Powered False 01:43:31.096661 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10116): Process ended prematurely: osmo-stp_10.42.42.5(pid=10116) [trial-2367↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10116)]