Failed
gprs:oc2g+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=13544): Process ended prematurely: osmo-stp_10.42.42.5(pid=13544) [trial-2368↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13544)]
Standard Output
---------------------------------------------- trial-2368 gprs:oc2g+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 02:24:04.373294 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:24:04.384652 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 02:24:04.535805 tst cs_paging_gprs_active.py: using LAC 25329 02:24:04.662542 tst cs_paging_gprs_active.py: using RAC 84 02:24:04.790883 tst cs_paging_gprs_active.py: using CellId 25329 02:24:04.922446 tst cs_paging_gprs_active.py: using BVCI 25330 02:24:04.947238 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:24:04.958467 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:24:04.969429 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:24:04.980563 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:24:04.991629 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:24:05.002995 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:24:05.014328 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:24:05.025579 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:24:05.037094 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 02:24:05.154999 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 02:24:05.449835 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:24:05.585318 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:24:05.918390 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13534): Launched 02:24:06.195642 run iperf3-srv_10.42.42.10(pid=13535): Launched 02:24:06.393607 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:24:06.528928 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:24:06.862924 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13536): Launched 02:24:07.140137 run iperf3-srv_10.42.42.10(pid=13537): Launched 02:24:07.337779 tst cs_paging_gprs_active.py:38: start network... 02:24:07.472915 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:24:07.990140 run create_hlr_db(pid=13538): Launched 02:24:08.176771 bus /gobi_6: Setting Powered False 02:24:09.198091 run create_hlr_db(pid=13538): Terminated: ok {rc=0} 02:24:09.628783 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13540): Launched 02:24:09.952696 run osmo-hlr_10.42.42.2(pid=13541): Launched 02:24:10.070606 run osmo-stp_10.42.42.5: Starting osmo-stp 02:24:10.631958 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13543): Launched 02:24:10.955546 run osmo-stp_10.42.42.5(pid=13544): Launched 02:24:11.073109 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:24:11.636880 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13546): Launched 02:24:11.752340 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:24:12.045121 run patchelf(pid=13547): Launched 02:24:12.234540 run osmo-stp_10.42.42.5(pid=13544): ERR: Terminated: ERROR {rc=1} [trial-2368↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13544)] 02:24:12.373227 run osmo-stp_10.42.42.5(pid=13544): stdout: | (launched: 2022-12-10_02:24:10.796430) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:24:12.511635 run osmo-stp_10.42.42.5(pid=13544): stderr: | �[0;m�[38;5;43m20221210022410990 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210022410990 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210022410990 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210022410991 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210022410991 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210022410991 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210022410991 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:24:12.646369 run osmo-stp_10.42.42.5(pid=13544): stdout: | (launched: 2022-12-10_02:24:10.796430) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:24:12.779281 run osmo-stp_10.42.42.5(pid=13544): stderr: | �[0;m�[38;5;43m20221210022410990 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210022410990 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210022410990 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210022410991 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210022410991 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210022410991 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210022410991 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:24:12.934070 run patchelf(pid=13547): Terminating (SIGINT) 02:24:13.115425 run patchelf(pid=13547): Terminated: ok {rc=0} 02:24:13.148621 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=13544): Process ended prematurely: osmo-stp_10.42.42.5(pid=13544) [trial-2368↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13544)] [trial-2368↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 02:24:13.158280 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 02:24:13.221045 run osmo-hlr_10.42.42.2(pid=13541): ERR: Terminated: ERROR {rc=237} [trial-2368↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13541)] 02:24:13.272435 run osmo-hlr_10.42.42.2(pid=13541): stdout: | (launched: 2022-12-10_02:24:09.793536) 02:24:13.324479 run osmo-hlr_10.42.42.2(pid=13541): stderr: | �[0;m�[1;31m20221210022409994 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210022409994 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210022409994 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210022409994 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210022409994 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210022409994 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210022410006 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2368/run.2022-12-10_02-07-09/gprs:oc2g+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210022410014 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210022410015 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210022410015 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:24:13.368887 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13534): Terminating (SIGTERM) 02:24:13.410917 run iperf3-srv_10.42.42.10(pid=13535): Terminating (SIGTERM) 02:24:13.453430 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13536): Terminating (SIGTERM) 02:24:13.495473 run iperf3-srv_10.42.42.10(pid=13537): Terminating (SIGTERM) 02:24:13.537886 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13540): Terminating (SIGTERM) 02:24:13.580048 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13543): Terminating (SIGTERM) 02:24:13.621801 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13546): Terminating (SIGTERM) 02:24:13.631419 --- ParallelTerminationStrategy: PID 13534 died... 02:24:13.687126 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13534): Terminated: ok {rc=0} 02:24:13.697194 --- ParallelTerminationStrategy: PID 13535 died... 02:24:13.752366 run iperf3-srv_10.42.42.10(pid=13535): Terminated {rc=256} 02:24:13.762494 --- ParallelTerminationStrategy: PID 13536 died... 02:24:13.818137 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13536): Terminated: ok {rc=0} 02:24:13.828168 --- ParallelTerminationStrategy: PID 13537 died... 02:24:13.883349 run iperf3-srv_10.42.42.10(pid=13537): Terminated {rc=256} 02:24:13.893429 --- ParallelTerminationStrategy: PID 13540 died... 02:24:13.948509 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13540): Terminated: ok {rc=0} 02:24:13.958679 --- ParallelTerminationStrategy: PID 13543 died... 02:24:14.013819 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13543): Terminated: ok {rc=0} 02:24:14.024019 --- ParallelTerminationStrategy: PID 13546 died... 02:24:14.079426 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13546): Terminated: ok {rc=0} 02:24:14.166774 bus /gobi_0: Setting Powered False 02:24:15.273118 bus /gobi_0: Setting Powered False 02:24:16.381909 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13544): Process ended prematurely: osmo-stp_10.42.42.5(pid=13544) [trial-2368↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13544)]