Failed
gprs:trx-lms.cs_paging_gprs_active.py (from gprs_trx-lms)
Stacktrace
osmo-stp_10.42.42.5(pid=16306): Process ended prematurely: osmo-stp_10.42.42.5(pid=16306) [trial-2368↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16306)]
Standard Output
---------------------------------------------- trial-2368 gprs:trx-lms cs_paging_gprs_active.py ---------------------------------------------- 02:55:41.648290 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 02:55:41.658781 tst gprs:trx-lms: Using 1 x bts (candidates: 1) 02:55:41.795816 tst cs_paging_gprs_active.py: using LAC 25498 02:55:41.916426 tst cs_paging_gprs_active.py: using RAC 253 02:55:42.036604 tst cs_paging_gprs_active.py: using CellId 25498 02:55:42.157689 tst cs_paging_gprs_active.py: using BVCI 25499 02:55:42.180682 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 02:55:42.191285 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 02:55:42.201649 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 02:55:42.212590 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 02:55:42.223129 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 02:55:42.233626 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 02:55:42.244334 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 02:55:42.254819 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 02:55:42.265527 tst gprs:trx-lms: Using 1 x modem (candidates: 4) 02:55:42.386724 tst gprs:trx-lms: Using 1 x modem (candidates: 4) 02:55:42.681524 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:55:42.817137 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:55:43.151881 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16296): Launched 02:55:43.431368 run iperf3-srv_10.42.42.10(pid=16297): Launched 02:55:43.630371 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:55:43.766037 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:55:44.101934 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16298): Launched 02:55:44.381453 run iperf3-srv_10.42.42.10(pid=16299): Launched 02:55:44.580336 tst cs_paging_gprs_active.py:38: start network... 02:55:44.715272 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:55:45.235064 run create_hlr_db(pid=16300): Launched 02:55:45.422340 bus /sierra_2: Setting Powered False 02:55:46.437822 run create_hlr_db(pid=16300): Terminated: ok {rc=0} 02:55:46.882863 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16302): Launched 02:55:47.260236 run osmo-hlr_10.42.42.2(pid=16303): Launched 02:55:47.379375 run osmo-stp_10.42.42.5: Starting osmo-stp 02:55:47.943572 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16305): Launched 02:55:48.267883 run osmo-stp_10.42.42.5(pid=16306): Launched 02:55:48.391321 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:55:48.957341 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16308): Launched 02:55:49.073004 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:55:49.355814 run patchelf(pid=16309): Launched 02:55:49.545873 run osmo-stp_10.42.42.5(pid=16306): ERR: Terminated: ERROR {rc=1} [trial-2368↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16306)] 02:55:49.684237 run osmo-stp_10.42.42.5(pid=16306): stdout: | (launched: 2022-12-10_02:55:48.108866) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:55:49.823021 run osmo-stp_10.42.42.5(pid=16306): stderr: | �[0;m�[38;5;43m20221210025548301 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210025548301 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210025548301 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210025548302 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210025548302 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210025548302 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210025548302 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:55:49.957398 run osmo-stp_10.42.42.5(pid=16306): stdout: | (launched: 2022-12-10_02:55:48.108866) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:55:50.090462 run osmo-stp_10.42.42.5(pid=16306): stderr: | �[0;m�[38;5;43m20221210025548301 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210025548301 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210025548301 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210025548302 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210025548302 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210025548302 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210025548302 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:55:50.244762 run patchelf(pid=16309): Terminating (SIGINT) 02:55:50.426731 run patchelf(pid=16309): Terminated: ok {rc=0} 02:55:50.460122 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=16306): Process ended prematurely: osmo-stp_10.42.42.5(pid=16306) [trial-2368↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16306)] [trial-2368↪gprs:trx-lms↪cs_paging_gprs_active.py:38] 02:55:50.469908 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 02:55:50.533366 run osmo-hlr_10.42.42.2(pid=16303): ERR: Terminated: ERROR {rc=237} [trial-2368↪gprs:trx-lms↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16303)] 02:55:50.584930 run osmo-hlr_10.42.42.2(pid=16303): stdout: | (launched: 2022-12-10_02:55:47.041266) 02:55:50.637158 run osmo-hlr_10.42.42.2(pid=16303): stderr: | �[0;m�[1;31m20221210025547303 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210025547303 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210025547304 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210025547304 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210025547304 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210025547304 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210025547316 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2368/run.2022-12-10_02-07-09/gprs:trx-lms/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210025547324 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210025547325 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210025547325 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:55:50.681617 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16296): Terminating (SIGTERM) 02:55:50.723455 run iperf3-srv_10.42.42.10(pid=16297): Terminating (SIGTERM) 02:55:50.765472 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16298): Terminating (SIGTERM) 02:55:50.807230 run iperf3-srv_10.42.42.10(pid=16299): Terminating (SIGTERM) 02:55:50.849115 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16302): Terminating (SIGTERM) 02:55:50.890933 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16305): Terminating (SIGTERM) 02:55:50.932728 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16308): Terminating (SIGTERM) 02:55:50.942527 --- ParallelTerminationStrategy: PID 16296 died... 02:55:50.998590 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16296): Terminated: ok {rc=0} 02:55:51.008658 --- ParallelTerminationStrategy: PID 16297 died... 02:55:51.064203 run iperf3-srv_10.42.42.10(pid=16297): Terminated {rc=256} 02:55:51.074167 --- ParallelTerminationStrategy: PID 16298 died... 02:55:51.129349 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16298): Terminated: ok {rc=0} 02:55:51.139272 --- ParallelTerminationStrategy: PID 16299 died... 02:55:51.194666 run iperf3-srv_10.42.42.10(pid=16299): Terminated {rc=256} 02:55:51.204634 --- ParallelTerminationStrategy: PID 16302 died... 02:55:51.259729 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16302): Terminated: ok {rc=0} 02:55:51.269763 --- ParallelTerminationStrategy: PID 16305 died... 02:55:51.324742 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16305): Terminated: ok {rc=0} 02:55:51.334755 --- ParallelTerminationStrategy: PID 16308 died... 02:55:51.389772 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16308): Terminated: ok {rc=0} 02:55:51.476303 bus /gobi_0: Setting Powered False 02:55:52.582896 bus /gobi_0: Setting Powered False 02:55:53.690491 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16306): Process ended prematurely: osmo-stp_10.42.42.5(pid=16306) [trial-2368↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16306)]