Failed
gprs:nanobts+band-1900.cs_paging_gprs_active.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=23021): Process ended prematurely: osmo-stp_10.42.42.5(pid=23021) [trial-2381↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23021)]
Standard Output
---------------------------------------------- trial-2381 gprs:nanobts+band-1900 cs_paging_gprs_active.py ---------------------------------------------- 20:12:33.688453 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 20:12:33.699269 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 20:12:33.827570 tst cs_paging_gprs_active.py: using LAC 31224 20:12:33.949869 tst cs_paging_gprs_active.py: using RAC 114 20:12:34.069998 tst cs_paging_gprs_active.py: using CellId 31224 20:12:34.189658 tst cs_paging_gprs_active.py: using BVCI 31225 20:12:34.213101 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 20:12:34.223901 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 20:12:34.234627 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 20:12:34.245267 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 20:12:34.255888 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 20:12:34.266916 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 20:12:34.277753 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 20:12:34.288269 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 20:12:34.299057 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 20:12:34.420433 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 20:12:34.721591 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:12:34.859048 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:12:35.203970 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23011): Launched 20:12:35.490547 run iperf3-srv_10.42.42.10(pid=23012): Launched 20:12:35.693572 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:12:35.831466 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:12:36.177152 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23013): Launched 20:12:36.463659 run iperf3-srv_10.42.42.10(pid=23014): Launched 20:12:36.666746 tst cs_paging_gprs_active.py:38: start network... 20:12:36.804851 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:12:37.328768 run create_hlr_db(pid=23015): Launched 20:12:37.519955 bus /sierra_2: Setting Powered False 20:12:38.542144 run create_hlr_db(pid=23015): Terminated: ok {rc=0} 20:12:38.959198 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23017): Launched 20:12:39.272169 run osmo-hlr_10.42.42.2(pid=23018): Launched 20:12:39.385412 run osmo-stp_10.42.42.5: Starting osmo-stp 20:12:39.923945 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23020): Launched 20:12:40.234690 run osmo-stp_10.42.42.5(pid=23021): Launched 20:12:40.346597 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:12:40.887968 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23023): Launched 20:12:40.997388 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:12:41.269103 run patchelf(pid=23024): Launched 20:12:41.449990 run osmo-stp_10.42.42.5(pid=23021): ERR: Terminated: ERROR {rc=1} [trial-2381↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23021)] 20:12:41.582612 run osmo-stp_10.42.42.5(pid=23021): stdout: | (launched: 2022-12-12_20:12:40.080915) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:12:41.715753 run osmo-stp_10.42.42.5(pid=23021): stderr: | �[0;m�[38;5;43m20221212201240255 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212201240255 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212201240256 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212201240256 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212201240257 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212201240257 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212201240257 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:12:41.843199 run osmo-stp_10.42.42.5(pid=23021): stdout: | (launched: 2022-12-12_20:12:40.080915) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:12:41.969478 run osmo-stp_10.42.42.5(pid=23021): stderr: | �[0;m�[38;5;43m20221212201240255 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212201240255 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212201240256 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212201240256 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212201240257 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212201240257 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212201240257 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:12:42.117103 run patchelf(pid=23024): Terminating (SIGINT) 20:12:42.290163 run patchelf(pid=23024): Terminated: ok {rc=0} 20:12:42.321967 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=23021): Process ended prematurely: osmo-stp_10.42.42.5(pid=23021) [trial-2381↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23021)] [trial-2381↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38] 20:12:42.331174 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 20:12:42.391518 run osmo-hlr_10.42.42.2(pid=23018): ERR: Terminated: ERROR {rc=237} [trial-2381↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23018)] 20:12:42.440652 run osmo-hlr_10.42.42.2(pid=23018): stdout: | (launched: 2022-12-12_20:12:39.115991) 20:12:42.490596 run osmo-hlr_10.42.42.2(pid=23018): stderr: | �[0;m�[1;31m20221212201239298 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212201239298 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212201239298 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212201239298 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212201239298 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212201239298 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212201239315 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2381/run.2022-12-12_19-09-05/gprs:nanobts+band-1900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212201239325 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212201239326 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212201239326 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:12:42.533095 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23011): Terminating (SIGTERM) 20:12:42.573017 run iperf3-srv_10.42.42.10(pid=23012): Terminating (SIGTERM) 20:12:42.613824 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23013): Terminating (SIGTERM) 20:12:42.653897 run iperf3-srv_10.42.42.10(pid=23014): Terminating (SIGTERM) 20:12:42.694060 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23017): Terminating (SIGTERM) 20:12:42.734058 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23020): Terminating (SIGTERM) 20:12:42.773827 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23023): Terminating (SIGTERM) 20:12:42.783125 --- ParallelTerminationStrategy: PID 23011 died... 20:12:42.836759 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23011): Terminated: ok {rc=0} 20:12:42.846484 --- ParallelTerminationStrategy: PID 23012 died... 20:12:42.899526 run iperf3-srv_10.42.42.10(pid=23012): Terminated {rc=256} 20:12:42.909206 --- ParallelTerminationStrategy: PID 23013 died... 20:12:42.962296 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23013): Terminated: ok {rc=0} 20:12:42.971916 --- ParallelTerminationStrategy: PID 23014 died... 20:12:43.025559 run iperf3-srv_10.42.42.10(pid=23014): Terminated {rc=256} 20:12:43.035169 --- ParallelTerminationStrategy: PID 23017 died... 20:12:43.088361 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23017): Terminated: ok {rc=0} 20:12:43.098037 --- ParallelTerminationStrategy: PID 23020 died... 20:12:43.151471 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23020): Terminated: ok {rc=0} 20:12:43.161141 --- ParallelTerminationStrategy: PID 23023 died... 20:12:43.214191 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23023): Terminated: ok {rc=0} 20:12:43.298728 bus /gobi_0: Setting Powered False 20:12:44.408593 bus /gobi_0: Setting Powered False 20:12:45.522526 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=23021): Process ended prematurely: osmo-stp_10.42.42.5(pid=23021) [trial-2381↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23021)]