Failed
gprs:oc2g+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=18926): Process ended prematurely: osmo-stp_10.42.42.5(pid=18926) [trial-2381↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18926)]
Standard Output
---------------------------------------------- trial-2381 gprs:oc2g+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 19:25:51.464495 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:25:51.476034 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 19:25:51.630374 tst cs_paging_gprs_active.py: using LAC 30975 19:25:51.757110 tst cs_paging_gprs_active.py: using RAC 120 19:25:51.885784 tst cs_paging_gprs_active.py: using CellId 30975 19:25:52.017353 tst cs_paging_gprs_active.py: using BVCI 30976 19:25:52.042405 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:25:52.053833 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:25:52.064865 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:25:52.076672 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:25:52.088389 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:25:52.100114 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:25:52.112014 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:25:52.123522 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:25:52.135548 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 19:25:52.253153 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 19:25:52.537933 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 19:25:52.664923 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:25:52.984801 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18916): Launched 19:25:53.248837 run iperf3-srv_10.42.42.10(pid=18917): Launched 19:25:53.436277 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 19:25:53.563161 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:25:53.881257 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18918): Launched 19:25:54.144915 run iperf3-srv_10.42.42.10(pid=18919): Launched 19:25:54.330685 tst cs_paging_gprs_active.py:38: start network... 19:25:54.457399 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:25:54.947491 run create_hlr_db(pid=18920): Launched 19:25:55.123463 bus /gobi_6: Setting Powered False 19:25:56.145510 run create_hlr_db(pid=18920): Terminated: ok {rc=0} 19:25:56.584018 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18922): Launched 19:25:56.915130 run osmo-hlr_10.42.42.2(pid=18923): Launched 19:25:57.036495 run osmo-stp_10.42.42.5: Starting osmo-stp 19:25:57.572576 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18925): Launched 19:25:57.878018 run osmo-stp_10.42.42.5(pid=18926): Launched 19:25:57.987270 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:25:58.519698 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18928): Launched 19:25:58.628353 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:25:58.895791 run patchelf(pid=18929): Launched 19:25:59.075492 run osmo-stp_10.42.42.5(pid=18926): ERR: Terminated: ERROR {rc=1} [trial-2381↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18926)] 19:25:59.206810 run osmo-stp_10.42.42.5(pid=18926): stdout: | (launched: 2022-12-12_19:25:57.727890) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:25:59.338261 run osmo-stp_10.42.42.5(pid=18926): stderr: | �[0;m�[38;5;43m20221212192557898 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212192557898 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212192557898 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212192557899 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212192557899 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212192557899 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212192557899 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:25:59.465335 run osmo-stp_10.42.42.5(pid=18926): stdout: | (launched: 2022-12-12_19:25:57.727890) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:25:59.590655 run osmo-stp_10.42.42.5(pid=18926): stderr: | �[0;m�[38;5;43m20221212192557898 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212192557898 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212192557898 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212192557899 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212192557899 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212192557899 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212192557899 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:25:59.736410 run patchelf(pid=18929): Terminating (SIGINT) 19:25:59.907882 run patchelf(pid=18929): Terminated: ok {rc=0} 19:25:59.939432 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=18926): Process ended prematurely: osmo-stp_10.42.42.5(pid=18926) [trial-2381↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18926)] [trial-2381↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 19:25:59.948586 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 19:26:00.009568 run osmo-hlr_10.42.42.2(pid=18923): ERR: Terminated: ERROR {rc=237} [trial-2381↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18923)] 19:26:00.059277 run osmo-hlr_10.42.42.2(pid=18923): stdout: | (launched: 2022-12-12_19:25:56.751609) 19:26:00.109592 run osmo-hlr_10.42.42.2(pid=18923): stderr: | �[0;m�[1;31m20221212192556950 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212192556950 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212192556950 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212192556950 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212192556950 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212192556950 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212192556965 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2381/run.2022-12-12_19-09-05/gprs:oc2g+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212192556975 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212192556975 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212192556975 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:26:00.152139 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18916): Terminating (SIGTERM) 19:26:00.192358 run iperf3-srv_10.42.42.10(pid=18917): Terminating (SIGTERM) 19:26:00.232500 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18918): Terminating (SIGTERM) 19:26:00.272792 run iperf3-srv_10.42.42.10(pid=18919): Terminating (SIGTERM) 19:26:00.313120 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18922): Terminating (SIGTERM) 19:26:00.353526 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18925): Terminating (SIGTERM) 19:26:00.393789 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18928): Terminating (SIGTERM) 19:26:00.403042 --- ParallelTerminationStrategy: PID 18916 died... 19:26:00.457297 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18916): Terminated: ok {rc=0} 19:26:00.466926 --- ParallelTerminationStrategy: PID 18917 died... 19:26:00.520396 run iperf3-srv_10.42.42.10(pid=18917): Terminated {rc=256} 19:26:00.529928 --- ParallelTerminationStrategy: PID 18918 died... 19:26:00.583279 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18918): Terminated: ok {rc=0} 19:26:00.592736 --- ParallelTerminationStrategy: PID 18919 died... 19:26:00.646395 run iperf3-srv_10.42.42.10(pid=18919): Terminated {rc=256} 19:26:00.656054 --- ParallelTerminationStrategy: PID 18922 died... 19:26:00.709527 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18922): Terminated: ok {rc=0} 19:26:00.719075 --- ParallelTerminationStrategy: PID 18925 died... 19:26:00.773146 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18925): Terminated: ok {rc=0} 19:26:00.782845 --- ParallelTerminationStrategy: PID 18928 died... 19:26:00.851662 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18928): Terminated: ok {rc=0} 19:26:00.959749 bus /gobi_0: Setting Powered False 19:26:02.072756 bus /gobi_0: Setting Powered False 19:26:03.180938 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18926): Process ended prematurely: osmo-stp_10.42.42.5(pid=18926) [trial-2381↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18926)]