Failed
gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=19599): Process ended prematurely: osmo-stp_10.42.42.5(pid=19599) [trial-2381↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19599)]
Standard Output
---------------------------------------------- trial-2381 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 19:35:26.732607 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:35:26.744567 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 19:35:26.893811 tst cs_paging_gprs_active.py: using LAC 31026 19:35:27.020318 tst cs_paging_gprs_active.py: using RAC 171 19:35:27.140000 tst cs_paging_gprs_active.py: using CellId 31026 19:35:27.260184 tst cs_paging_gprs_active.py: using BVCI 31027 19:35:27.283595 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:35:27.295166 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:35:27.306293 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:35:27.317997 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:35:27.329616 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:35:27.341247 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:35:27.353019 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:35:27.364549 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:35:27.376318 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 19:35:27.496808 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 19:35:27.780342 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 19:35:27.909155 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:35:28.225723 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19589): Launched 19:35:28.487536 run iperf3-srv_10.42.42.10(pid=19590): Launched 19:35:28.672716 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 19:35:28.799051 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:35:29.116014 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19591): Launched 19:35:29.380425 run iperf3-srv_10.42.42.10(pid=19592): Launched 19:35:29.565353 tst cs_paging_gprs_active.py:38: start network... 19:35:29.691307 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:35:30.177292 run create_hlr_db(pid=19593): Launched 19:35:30.351366 bus /gobi_6: Setting Powered False 19:35:31.399765 run create_hlr_db(pid=19593): Terminated: ok {rc=0} 19:35:31.854847 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19595): Launched 19:35:32.195144 run osmo-hlr_10.42.42.2(pid=19596): Launched 19:35:32.307272 run osmo-stp_10.42.42.5: Starting osmo-stp 19:35:32.850382 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19598): Launched 19:35:33.153830 run osmo-stp_10.42.42.5(pid=19599): Launched 19:35:33.263151 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:35:33.791373 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19601): Launched 19:35:33.899235 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:35:34.165622 run patchelf(pid=19602): Launched 19:35:34.343849 run osmo-stp_10.42.42.5(pid=19599): ERR: Terminated: ERROR {rc=1} [trial-2381↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19599)] 19:35:34.475510 run osmo-stp_10.42.42.5(pid=19599): stdout: | (launched: 2022-12-12_19:35:33.004776) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:35:34.606298 run osmo-stp_10.42.42.5(pid=19599): stderr: | �[0;m�[38;5;43m20221212193533175 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212193533176 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212193533176 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212193533176 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212193533177 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212193533177 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212193533177 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:35:34.731909 run osmo-stp_10.42.42.5(pid=19599): stdout: | (launched: 2022-12-12_19:35:33.004776) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:35:34.856194 run osmo-stp_10.42.42.5(pid=19599): stderr: | �[0;m�[38;5;43m20221212193533175 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212193533176 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212193533176 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212193533176 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212193533177 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212193533177 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212193533177 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:35:35.001265 run patchelf(pid=19602): Terminating (SIGINT) 19:35:35.171505 run patchelf(pid=19602): Terminated: ok {rc=0} 19:35:35.202700 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=19599): Process ended prematurely: osmo-stp_10.42.42.5(pid=19599) [trial-2381↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19599)] [trial-2381↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 19:35:35.211913 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 19:35:35.272235 run osmo-hlr_10.42.42.2(pid=19596): ERR: Terminated: ERROR {rc=237} [trial-2381↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=19596)] 19:35:35.321407 run osmo-hlr_10.42.42.2(pid=19596): stdout: | (launched: 2022-12-12_19:35:32.024323) 19:35:35.371348 run osmo-hlr_10.42.42.2(pid=19596): stderr: | �[0;m�[1;31m20221212193532271 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212193532271 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212193532271 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212193532271 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212193532271 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212193532271 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212193532283 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2381/run.2022-12-12_19-09-05/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212193532293 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212193532293 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212193532294 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:35:35.413997 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19589): Terminating (SIGTERM) 19:35:35.454222 run iperf3-srv_10.42.42.10(pid=19590): Terminating (SIGTERM) 19:35:35.494450 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19591): Terminating (SIGTERM) 19:35:35.534695 run iperf3-srv_10.42.42.10(pid=19592): Terminating (SIGTERM) 19:35:35.574877 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19595): Terminating (SIGTERM) 19:35:35.615014 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19598): Terminating (SIGTERM) 19:35:35.655115 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19601): Terminating (SIGTERM) 19:35:35.664384 --- ParallelTerminationStrategy: PID 19589 died... 19:35:35.718073 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19589): Terminated: ok {rc=0} 19:35:35.728019 --- ParallelTerminationStrategy: PID 19590 died... 19:35:35.781415 run iperf3-srv_10.42.42.10(pid=19590): Terminated {rc=256} 19:35:35.791204 --- ParallelTerminationStrategy: PID 19591 died... 19:35:35.844821 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19591): Terminated: ok {rc=0} 19:35:35.854510 --- ParallelTerminationStrategy: PID 19592 died... 19:35:35.908030 run iperf3-srv_10.42.42.10(pid=19592): Terminated {rc=256} 19:35:35.917965 --- ParallelTerminationStrategy: PID 19595 died... 19:35:35.971402 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19595): Terminated: ok {rc=0} 19:35:35.981161 --- ParallelTerminationStrategy: PID 19598 died... 19:35:36.035180 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19598): Terminated: ok {rc=0} 19:35:36.045156 --- ParallelTerminationStrategy: PID 19601 died... 19:35:36.098671 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19601): Terminated: ok {rc=0} 19:35:36.188090 bus /gobi_0: Setting Powered False 19:35:37.293624 bus /gobi_0: Setting Powered False 19:35:38.405533 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=19599): Process ended prematurely: osmo-stp_10.42.42.5(pid=19599) [trial-2381↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19599)]