Failed
gprs:trx-lms-limenet-micro.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=22248): Process ended prematurely: osmo-stp_10.42.42.5(pid=22248) [trial-2381↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22248)]
Standard Output
---------------------------------------------- trial-2381 gprs:trx-lms-limenet-micro cs_paging_gprs_active.py ---------------------------------------------- 20:05:22.530490 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 20:05:22.541671 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 20:05:22.678158 tst cs_paging_gprs_active.py: using LAC 31186 20:05:22.804133 tst cs_paging_gprs_active.py: using RAC 76 20:05:22.920138 tst cs_paging_gprs_active.py: using CellId 31186 20:05:23.036642 tst cs_paging_gprs_active.py: using BVCI 31187 20:05:23.059677 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 20:05:23.070531 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 20:05:23.081552 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 20:05:23.092267 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 20:05:23.103100 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 20:05:23.113825 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 20:05:23.124679 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 20:05:23.135354 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 20:05:23.146283 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 20:05:23.263919 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 20:05:23.558321 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:05:23.693855 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:05:24.032565 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22238): Launched 20:05:24.313380 run iperf3-srv_10.42.42.10(pid=22239): Launched 20:05:24.512394 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:05:24.648147 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:05:24.986053 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22240): Launched 20:05:25.265941 run iperf3-srv_10.42.42.10(pid=22241): Launched 20:05:25.464621 tst cs_paging_gprs_active.py:38: start network... 20:05:25.599790 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:05:26.111379 run create_hlr_db(pid=22242): Launched 20:05:26.298767 bus /sierra_2: Setting Powered False 20:05:27.320178 run create_hlr_db(pid=22242): Terminated: ok {rc=0} 20:05:27.726814 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22244): Launched 20:05:28.028596 run osmo-hlr_10.42.42.2(pid=22245): Launched 20:05:28.148461 run osmo-stp_10.42.42.5: Starting osmo-stp 20:05:28.678418 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22247): Launched 20:05:28.980016 run osmo-stp_10.42.42.5(pid=22248): Launched 20:05:29.088269 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:05:29.615223 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22250): Launched 20:05:29.722101 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:05:29.987042 run patchelf(pid=22251): Launched 20:05:30.165258 run osmo-stp_10.42.42.5(pid=22248): ERR: Terminated: ERROR {rc=1} [trial-2381↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22248)] 20:05:30.295453 run osmo-stp_10.42.42.5(pid=22248): stdout: | (launched: 2022-12-12_20:05:28.831025) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:05:30.425700 run osmo-stp_10.42.42.5(pid=22248): stderr: | �[0;m�[38;5;43m20221212200528998 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212200528998 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212200528998 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212200528999 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212200528999 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212200528999 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212200528999 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:05:30.550799 run osmo-stp_10.42.42.5(pid=22248): stdout: | (launched: 2022-12-12_20:05:28.831025) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:05:30.674328 run osmo-stp_10.42.42.5(pid=22248): stderr: | �[0;m�[38;5;43m20221212200528998 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212200528998 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212200528998 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212200528999 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212200528999 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212200528999 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212200528999 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:05:30.818963 run patchelf(pid=22251): Terminating (SIGINT) 20:05:31.020546 run patchelf(pid=22251): Terminated: ok {rc=0} 20:05:31.056451 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=22248): Process ended prematurely: osmo-stp_10.42.42.5(pid=22248) [trial-2381↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22248)] [trial-2381↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38] 20:05:31.067552 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 20:05:31.136218 run osmo-hlr_10.42.42.2(pid=22245): ERR: Terminated: ERROR {rc=237} [trial-2381↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22245)] 20:05:31.190706 run osmo-hlr_10.42.42.2(pid=22245): stdout: | (launched: 2022-12-12_20:05:27.879704) 20:05:31.246753 run osmo-hlr_10.42.42.2(pid=22245): stderr: | �[0;m�[1;31m20221212200528053 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212200528053 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212200528053 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212200528053 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212200528054 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212200528054 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212200528066 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2381/run.2022-12-12_19-09-05/gprs:trx-lms-limenet-micro/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212200528075 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212200528075 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212200528075 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:05:31.292776 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22238): Terminating (SIGTERM) 20:05:31.341372 run iperf3-srv_10.42.42.10(pid=22239): Terminating (SIGTERM) 20:05:31.394348 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22240): Terminating (SIGTERM) 20:05:31.444659 run iperf3-srv_10.42.42.10(pid=22241): Terminating (SIGTERM) 20:05:31.497139 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22244): Terminating (SIGTERM) 20:05:31.546850 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22247): Terminating (SIGTERM) 20:05:31.596659 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22250): Terminating (SIGTERM) 20:05:31.606837 --- ParallelTerminationStrategy: PID 22238 died... 20:05:31.672584 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22238): Terminated: ok {rc=0} 20:05:31.685416 --- ParallelTerminationStrategy: PID 22239 died... 20:05:31.751391 run iperf3-srv_10.42.42.10(pid=22239): Terminated {rc=256} 20:05:31.763685 --- ParallelTerminationStrategy: PID 22240 died... 20:05:31.828843 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22240): Terminated: ok {rc=0} 20:05:31.841417 --- ParallelTerminationStrategy: PID 22241 died... 20:05:31.907831 run iperf3-srv_10.42.42.10(pid=22241): Terminated {rc=256} 20:05:31.920655 --- ParallelTerminationStrategy: PID 22244 died... 20:05:31.986642 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22244): Terminated: ok {rc=0} 20:05:31.997982 --- ParallelTerminationStrategy: PID 22247 died... 20:05:32.064476 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22247): Terminated: ok {rc=0} 20:05:32.076866 --- ParallelTerminationStrategy: PID 22250 died... 20:05:32.144802 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22250): Terminated: ok {rc=0} 20:05:32.244465 bus /gobi_0: Setting Powered False 20:05:33.344811 bus /gobi_0: Setting Powered False 20:05:34.456816 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22248): Process ended prematurely: osmo-stp_10.42.42.5(pid=22248) [trial-2381↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22248)]