Failed
dynts:oc2g+mod-bts0-dynts67-osmo.switch_tch_pdch.py (from dynts_oc2g+mod-bts0-dynts67-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=26552): Process ended prematurely: osmo-stp_10.42.42.5(pid=26552) [trial-2382↪dynts:oc2g+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26552)]
Standard Output
---------------------------------------------- trial-2382 dynts:oc2g+mod-bts0-dynts67-osmo switch_tch_pdch.py ---------------------------------------------- 20:54:49.358492 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 20:54:49.370095 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x bts (candidates: 1) 20:54:49.526817 tst switch_tch_pdch.py: using LAC 31442 20:54:49.656356 tst switch_tch_pdch.py: using RAC 77 20:54:49.790167 tst switch_tch_pdch.py: using CellId 31442 20:54:49.923726 tst switch_tch_pdch.py: using BVCI 31443 20:54:49.949167 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 20:54:49.960687 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 20:54:49.971982 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 20:54:49.983519 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 20:54:49.994995 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 20:54:50.006548 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 20:54:50.018366 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 20:54:50.029862 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 20:54:50.149541 tst dynts:oc2g+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 20:54:50.435421 tst switch_tch_pdch.py:51: start network... 20:54:50.565526 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:54:51.035715 run create_hlr_db(pid=26546): Launched 20:54:51.161549 bus /gobi_6: Setting Powered False 20:54:52.235395 run create_hlr_db(pid=26546): Terminated: ok {rc=0} 20:54:52.646731 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26548): Launched 20:54:52.980453 run osmo-hlr_10.42.42.2(pid=26549): Launched 20:54:53.101024 run osmo-stp_10.42.42.5: Starting osmo-stp 20:54:53.647645 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26551): Launched 20:54:53.980754 run osmo-stp_10.42.42.5(pid=26552): Launched 20:54:54.101238 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:54:54.651098 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26554): Launched 20:54:54.770100 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:54:55.058911 run patchelf(pid=26555): Launched 20:54:55.252908 run osmo-stp_10.42.42.5(pid=26552): ERR: Terminated: ERROR {rc=1} [trial-2382↪dynts:oc2g+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26552)] 20:54:55.394862 run osmo-stp_10.42.42.5(pid=26552): stdout: | (launched: 2022-12-12_20:54:53.816176) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:54:55.536821 run osmo-stp_10.42.42.5(pid=26552): stderr: | �[0;m�[38;5;43m20221212205454007 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212205454008 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212205454008 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212205454008 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212205454009 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212205454009 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212205454009 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:54:55.674101 run osmo-stp_10.42.42.5(pid=26552): stdout: | (launched: 2022-12-12_20:54:53.816176) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:54:55.810405 run osmo-stp_10.42.42.5(pid=26552): stderr: | �[0;m�[38;5;43m20221212205454007 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212205454008 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212205454008 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212205454008 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212205454009 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212205454009 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212205454009 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:54:55.968879 run patchelf(pid=26555): Terminating (SIGINT) 20:54:56.154858 run patchelf(pid=26555): Terminated: ok {rc=0} 20:54:56.188440 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=26552): Process ended prematurely: osmo-stp_10.42.42.5(pid=26552) [trial-2382↪dynts:oc2g+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26552)] [trial-2382↪dynts:oc2g+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54] 20:54:56.198023 tst switch_tch_pdch.py:54: Test FAILED (6.8 sec) 20:54:56.263544 run osmo-hlr_10.42.42.2(pid=26549): ERR: Terminated: ERROR {rc=237} [trial-2382↪dynts:oc2g+mod-bts0-dynts67-osmo↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26549)] 20:54:56.317101 run osmo-hlr_10.42.42.2(pid=26549): stdout: | (launched: 2022-12-12_20:54:52.815604) 20:54:56.370978 run osmo-hlr_10.42.42.2(pid=26549): stderr: | �[0;m�[1;31m20221212205453014 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212205453014 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212205453014 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212205453014 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212205453014 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212205453014 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212205453074 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2382/run.2022-12-12_20-36-34/dynts:oc2g+mod-bts0-dynts67-osmo/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212205453084 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212205453084 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212205453084 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:54:56.416661 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26548): Terminating (SIGTERM) 20:54:56.459962 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26551): Terminating (SIGTERM) 20:54:56.503615 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26554): Terminating (SIGTERM) 20:54:56.513665 --- ParallelTerminationStrategy: PID 26548 died... 20:54:56.571614 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26548): Terminated: ok {rc=0} 20:54:56.582095 --- ParallelTerminationStrategy: PID 26551 died... 20:54:56.639829 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26551): Terminated: ok {rc=0} 20:54:56.650184 --- ParallelTerminationStrategy: PID 26554 died... 20:54:56.708351 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26554): Terminated: ok {rc=0} 20:54:56.797793 bus /gobi_0: Setting Powered False 20:54:57.907329 bus /gobi_0: Setting Powered False 20:54:59.021847 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26552): Process ended prematurely: osmo-stp_10.42.42.5(pid=26552) [trial-2382↪dynts:oc2g+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26552)]