Failed
gprs:oc2g.ping.py (from gprs_oc2g)
Stacktrace
osmo-stp_10.42.42.5(pid=1787): Process ended prematurely: osmo-stp_10.42.42.5(pid=1787) [trial-2383↪gprs:oc2g↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1787)]
Standard Output
---------------------------------------------- trial-2383 gprs:oc2g ping.py ---------------------------------------------- 22:20:17.718927 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 22:20:17.730648 tst gprs:oc2g: Using 1 x bts (candidates: 1) 22:20:17.863674 tst ping.py: using LAC 31885 22:20:17.991716 tst ping.py: using RAC 10 22:20:18.121347 tst ping.py: using CellId 31885 22:20:18.251033 tst ping.py: using BVCI 31886 22:20:18.276198 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 22:20:18.287176 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 22:20:18.298054 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 22:20:18.309584 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 22:20:18.320685 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 22:20:18.331649 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 22:20:18.342936 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 22:20:18.354252 tst gprs:oc2g: Using 1 x modem (candidates: 4) 22:20:18.649260 tst ping.py:19: start network... 22:20:18.786815 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:20:19.300649 run create_hlr_db(pid=1781): Launched 22:20:19.490952 bus /gobi_6: Setting Powered False 22:20:20.510802 run create_hlr_db(pid=1781): Terminated: ok {rc=0} 22:20:20.923385 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1783): Launched 22:20:21.231385 run osmo-hlr_10.42.42.2(pid=1784): Launched 22:20:21.350628 run osmo-stp_10.42.42.5: Starting osmo-stp 22:20:21.894763 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1786): Launched 22:20:22.202217 run osmo-stp_10.42.42.5(pid=1787): Launched 22:20:22.313907 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:20:22.847981 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1789): Launched 22:20:22.956655 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:20:23.225044 run patchelf(pid=1790): Launched 22:20:23.404577 run osmo-stp_10.42.42.5(pid=1787): ERR: Terminated: ERROR {rc=1} [trial-2383↪gprs:oc2g↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1787)] 22:20:23.535136 run osmo-stp_10.42.42.5(pid=1787): stdout: | (launched: 2022-12-12_22:20:22.050539) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:20:23.666434 run osmo-stp_10.42.42.5(pid=1787): stderr: | �[0;m�[38;5;43m20221212222022221 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212222022222 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212222022222 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212222022222 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212222022224 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212222022225 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212222022225 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:20:23.793176 run osmo-stp_10.42.42.5(pid=1787): stdout: | (launched: 2022-12-12_22:20:22.050539) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:20:23.918477 run osmo-stp_10.42.42.5(pid=1787): stderr: | �[0;m�[38;5;43m20221212222022221 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212222022222 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212222022222 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212222022222 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212222022224 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212222022225 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212222022225 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:20:24.065250 run patchelf(pid=1790): Terminating (SIGINT) 22:20:24.238585 run patchelf(pid=1790): Terminated: ok {rc=0} 22:20:24.269834 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=1787): Process ended prematurely: osmo-stp_10.42.42.5(pid=1787) [trial-2383↪gprs:oc2g↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1787)] [trial-2383↪gprs:oc2g↪ping.py:22] 22:20:24.278430 tst ping.py:22: Test FAILED (6.5 sec) 22:20:24.338024 run osmo-hlr_10.42.42.2(pid=1784): ERR: Terminated: ERROR {rc=237} [trial-2383↪gprs:oc2g↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1784)] 22:20:24.386842 run osmo-hlr_10.42.42.2(pid=1784): stdout: | (launched: 2022-12-12_22:20:21.079283) 22:20:24.436648 run osmo-hlr_10.42.42.2(pid=1784): stderr: | �[0;m�[1;31m20221212222021259 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212222021259 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212222021259 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212222021259 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212222021259 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212222021259 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212222021271 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2383/run.2022-12-12_22-05-43/gprs:oc2g/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212222021280 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212222021280 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212222021280 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:20:24.478644 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1783): Terminating (SIGTERM) 22:20:24.518933 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1786): Terminating (SIGTERM) 22:20:24.558718 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1789): Terminating (SIGTERM) 22:20:24.568111 --- ParallelTerminationStrategy: PID 1783 died... 22:20:24.621432 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1783): Terminated: ok {rc=0} 22:20:24.631221 --- ParallelTerminationStrategy: PID 1786 died... 22:20:24.684216 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1786): Terminated: ok {rc=0} 22:20:24.693940 --- ParallelTerminationStrategy: PID 1789 died... 22:20:24.747055 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1789): Terminated: ok {rc=0} 22:20:24.835006 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1787): Process ended prematurely: osmo-stp_10.42.42.5(pid=1787) [trial-2383↪gprs:oc2g↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1787)]