Failed
dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo.switch_tch_pdch.py (from dynts_trx-lms-limenet-micro+mod-bts0-dynts67-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=6945): Process ended prematurely: osmo-stp_10.42.42.5(pid=6945) [trial-2391↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6945)]
Standard Output
---------------------------------------------- trial-2391 dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo switch_tch_pdch.py ---------------------------------------------- 16:39:25.124386 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 16:39:25.136051 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x bts (candidates: 1) 16:39:25.295542 tst switch_tch_pdch.py: using LAC 34895 16:39:25.420591 tst switch_tch_pdch.py: using RAC 215 16:39:25.545664 tst switch_tch_pdch.py: using CellId 34895 16:39:25.670036 tst switch_tch_pdch.py: using BVCI 34896 16:39:25.694966 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 16:39:25.706783 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 16:39:25.718513 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 16:39:25.730298 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 16:39:25.742198 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 16:39:25.754172 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 16:39:25.766313 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 16:39:25.778360 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 16:39:25.897493 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 16:39:26.195841 tst switch_tch_pdch.py:51: start network... 16:39:26.331256 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:39:26.814871 run create_hlr_db(pid=6939): Launched 16:39:26.948179 bus /gobi_6: Setting Powered False 16:39:28.024077 run create_hlr_db(pid=6939): Terminated: ok {rc=0} 16:39:28.408557 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6941): Launched 16:39:28.717027 run osmo-hlr_10.42.42.2(pid=6942): Launched 16:39:28.837922 run osmo-stp_10.42.42.5: Starting osmo-stp 16:39:29.347944 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6944): Launched 16:39:29.655299 run osmo-stp_10.42.42.5(pid=6945): Launched 16:39:29.766673 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:39:30.274905 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6947): Launched 16:39:30.383290 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:39:30.650419 run patchelf(pid=6948): Launched 16:39:30.829827 run osmo-stp_10.42.42.5(pid=6945): ERR: Terminated: ERROR {rc=1} [trial-2391↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6945)] 16:39:30.969455 run osmo-stp_10.42.42.5(pid=6945): stdout: | (launched: 2022-12-13_16:39:29.502851) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:39:31.103946 run osmo-stp_10.42.42.5(pid=6945): stderr: | �[0;m�[38;5;43m20221213163929674 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213163929674 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213163929674 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213163929675 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213163929675 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213163929675 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213163929675 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:39:31.232777 run osmo-stp_10.42.42.5(pid=6945): stdout: | (launched: 2022-12-13_16:39:29.502851) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:39:31.360711 run osmo-stp_10.42.42.5(pid=6945): stderr: | �[0;m�[38;5;43m20221213163929674 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213163929674 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213163929674 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213163929675 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213163929675 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213163929675 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213163929675 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:39:31.511500 run patchelf(pid=6948): Terminating (SIGINT) 16:39:31.687800 run patchelf(pid=6948): Terminated: ok {rc=0} 16:39:31.720503 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=6945): Process ended prematurely: osmo-stp_10.42.42.5(pid=6945) [trial-2391↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6945)] [trial-2391↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54] 16:39:31.730533 tst switch_tch_pdch.py:54: Test FAILED (6.6 sec) 16:39:31.792403 run osmo-hlr_10.42.42.2(pid=6942): ERR: Terminated: ERROR {rc=237} [trial-2391↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=6942)] 16:39:31.842881 run osmo-hlr_10.42.42.2(pid=6942): stdout: | (launched: 2022-12-13_16:39:28.563897) 16:39:31.894447 run osmo-hlr_10.42.42.2(pid=6942): stderr: | �[0;m�[1;31m20221213163928738 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213163928738 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213163928738 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213163928738 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213163928738 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213163928738 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213163928751 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2391/run.2022-12-13_15-37-59/dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213163928759 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213163928760 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213163928760 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:39:31.938175 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6941): Terminating (SIGTERM) 16:39:31.980217 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6944): Terminating (SIGTERM) 16:39:32.023809 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6947): Terminating (SIGTERM) 16:39:32.034420 --- ParallelTerminationStrategy: PID 6941 died... 16:39:32.090973 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6941): Terminated: ok {rc=0} 16:39:32.101089 --- ParallelTerminationStrategy: PID 6944 died... 16:39:32.154803 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6944): Terminated: ok {rc=0} 16:39:32.164819 --- ParallelTerminationStrategy: PID 6947 died... 16:39:32.218590 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6947): Terminated: ok {rc=0} 16:39:32.303041 bus /gobi_0: Setting Powered False 16:39:33.410237 bus /gobi_0: Setting Powered False 16:39:34.522898 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=6945): Process ended prematurely: osmo-stp_10.42.42.5(pid=6945) [trial-2391↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6945)]