Failed
gprs:sysmo.cs_paging_gprs_active.py (from gprs_sysmo)
Stacktrace
osmo-stp_10.42.42.5(pid=18691): Process ended prematurely: osmo-stp_10.42.42.5(pid=18691) [trial-2393↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18691)]
Standard Output
---------------------------------------------- trial-2393 gprs:sysmo cs_paging_gprs_active.py ---------------------------------------------- 18:44:24.989158 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 18:44:24.999949 tst gprs:sysmo: Using 1 x bts (candidates: 1) 18:44:25.120504 tst cs_paging_gprs_active.py: using LAC 35528 18:44:25.238495 tst cs_paging_gprs_active.py: using RAC 83 18:44:25.360510 tst cs_paging_gprs_active.py: using CellId 35528 18:44:25.476486 tst cs_paging_gprs_active.py: using BVCI 35529 18:44:25.499411 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 18:44:25.509953 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 18:44:25.520357 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 18:44:25.530733 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 18:44:25.541060 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 18:44:25.551451 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 18:44:25.562042 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 18:44:25.572478 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 18:44:25.583768 tst gprs:sysmo: Using 1 x modem (candidates: 4) 18:44:25.701882 tst gprs:sysmo: Using 1 x modem (candidates: 4) 18:44:25.996410 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 18:44:26.133229 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:44:26.468276 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18681): Launched 18:44:26.746815 run iperf3-srv_10.42.42.10(pid=18682): Launched 18:44:26.946352 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 18:44:27.082078 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:44:27.417063 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18683): Launched 18:44:27.694596 run iperf3-srv_10.42.42.10(pid=18684): Launched 18:44:27.892425 tst cs_paging_gprs_active.py:38: start network... 18:44:28.027166 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:44:28.535782 run create_hlr_db(pid=18685): Launched 18:44:28.722976 bus /sierra_2: Setting Powered False 18:44:29.744518 run create_hlr_db(pid=18685): Terminated: ok {rc=0} 18:44:30.149781 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18687): Launched 18:44:30.450589 run osmo-hlr_10.42.42.2(pid=18688): Launched 18:44:30.561221 run osmo-stp_10.42.42.5: Starting osmo-stp 18:44:31.118458 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18690): Launched 18:44:31.518830 run osmo-stp_10.42.42.5(pid=18691): Launched 18:44:31.773866 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:44:33.281835 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18693): Launched 18:44:33.389437 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:44:33.654361 run patchelf(pid=18694): Launched 18:44:33.831311 run osmo-stp_10.42.42.5(pid=18691): ERR: Terminated: ERROR {rc=1} [trial-2393↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18691)] 18:44:33.960729 run osmo-stp_10.42.42.5(pid=18691): stdout: | (launched: 2022-12-13_18:44:31.275904) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:44:34.090263 run osmo-stp_10.42.42.5(pid=18691): stderr: | �[0;m�[38;5;43m20221213184431601 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213184431602 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213184431602 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213184431602 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213184431603 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213184431603 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213184431603 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:44:34.215380 run osmo-stp_10.42.42.5(pid=18691): stdout: | (launched: 2022-12-13_18:44:31.275904) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:44:34.339252 run osmo-stp_10.42.42.5(pid=18691): stderr: | �[0;m�[38;5;43m20221213184431601 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213184431602 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213184431602 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213184431602 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213184431603 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213184431603 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213184431603 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:44:34.483350 run patchelf(pid=18694): Terminating (SIGINT) 18:44:34.652264 run patchelf(pid=18694): Terminated: ok {rc=0} 18:44:34.683201 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=18691): Process ended prematurely: osmo-stp_10.42.42.5(pid=18691) [trial-2393↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18691)] [trial-2393↪gprs:sysmo↪cs_paging_gprs_active.py:38] 18:44:34.692151 tst cs_paging_gprs_active.py:38: Test FAILED (9.7 sec) 18:44:34.751908 run osmo-hlr_10.42.42.2(pid=18688): ERR: Terminated: ERROR {rc=237} [trial-2393↪gprs:sysmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18688)] 18:44:34.800703 run osmo-hlr_10.42.42.2(pid=18688): stdout: | (launched: 2022-12-13_18:44:30.302781) 18:44:34.850081 run osmo-hlr_10.42.42.2(pid=18688): stderr: | �[0;m�[1;31m20221213184430476 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213184430476 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213184430476 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213184430476 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213184430476 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213184430476 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213184430488 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2393/run.2022-12-13_18-38-33/gprs:sysmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213184430497 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213184430498 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213184430498 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:44:34.892213 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18681): Terminating (SIGTERM) 18:44:34.931893 run iperf3-srv_10.42.42.10(pid=18682): Terminating (SIGTERM) 18:44:34.971704 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18683): Terminating (SIGTERM) 18:44:35.011672 run iperf3-srv_10.42.42.10(pid=18684): Terminating (SIGTERM) 18:44:35.051389 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18687): Terminating (SIGTERM) 18:44:35.091156 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18690): Terminating (SIGTERM) 18:44:35.131007 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18693): Terminating (SIGTERM) 18:44:35.140217 --- ParallelTerminationStrategy: PID 18681 died... 18:44:35.193538 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18681): Terminated: ok {rc=0} 18:44:35.203159 --- ParallelTerminationStrategy: PID 18682 died... 18:44:35.256350 run iperf3-srv_10.42.42.10(pid=18682): Terminated {rc=256} 18:44:35.265966 --- ParallelTerminationStrategy: PID 18683 died... 18:44:35.319185 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18683): Terminated: ok {rc=0} 18:44:35.328749 --- ParallelTerminationStrategy: PID 18684 died... 18:44:35.381808 run iperf3-srv_10.42.42.10(pid=18684): Terminated {rc=256} 18:44:35.391405 --- ParallelTerminationStrategy: PID 18687 died... 18:44:35.444807 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18687): Terminated: ok {rc=0} 18:44:35.454611 --- ParallelTerminationStrategy: PID 18690 died... 18:44:35.508234 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18690): Terminated: ok {rc=0} 18:44:35.517777 --- ParallelTerminationStrategy: PID 18693 died... 18:44:35.570992 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18693): Terminated: ok {rc=0} 18:44:35.659469 bus /gobi_0: Setting Powered False 18:44:36.762756 bus /gobi_0: Setting Powered False 18:44:37.869514 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18691): Process ended prematurely: osmo-stp_10.42.42.5(pid=18691) [trial-2393↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18691)]