ping.py gprs:trx-lms

Failing for the past 73 builds since #2327

Took 8 sec (from gprs_trx-lms)

Stack Trace

osmo-stp_10.42.42.5(pid=8062): Process ended prematurely: osmo-stp_10.42.42.5(pid=8062) [trial-2399↪gprs:trx-lms↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8062)]

Standard Output


----------------------------------------------
trial-2399 gprs:trx-lms ping.py
----------------------------------------------
04:23:56.721700 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
04:23:56.733612 tst                     gprs:trx-lms: Using 1 x bts (candidates: 1)
04:23:56.870996 tst                          ping.py: using LAC 38523
04:23:56.989219 tst                          ping.py: using RAC 18
04:23:57.104748 tst                          ping.py: using CellId 38523
04:23:57.228715 tst                          ping.py: using BVCI 38524
04:23:57.253158 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
04:23:57.264307 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
04:23:57.275319 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
04:23:57.286305 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
04:23:57.297583 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
04:23:57.308706 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
04:23:57.320030 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
04:23:57.331368 tst                     gprs:trx-lms: Using 1 x modem (candidates: 4)
04:23:57.619749 tst                       ping.py:19: start network...
04:23:57.751037 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
04:23:58.247224 run          create_hlr_db(pid=8056): Launched
04:23:58.431083 bus                          /gobi_6: Setting Powered False
04:23:59.452418 run          create_hlr_db(pid=8056): Terminated: ok {rc=0}
04:23:59.849110 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8058): Launched
04:24:00.141959 run    osmo-hlr_10.42.42.2(pid=8059): Launched
04:24:00.249619 run              osmo-stp_10.42.42.5: Starting osmo-stp
04:24:00.766008 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8061): Launched
04:24:01.196392 run    osmo-stp_10.42.42.5(pid=8062): Launched
04:24:01.420380 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
04:24:02.067087 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8100): Launched
04:24:02.191513 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
04:24:02.526527 run               patchelf(pid=8113): Launched
04:24:02.753154 run    osmo-stp_10.42.42.5(pid=8062): ERR: Terminated: ERROR {rc=1}  [trial-2399↪gprs:trx-lms↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8062)]
04:24:02.908078 run    osmo-stp_10.42.42.5(pid=8062): stdout: 
| (launched: 2022-12-14_04:24:00.937015)
| Copyright (C) 2015-2020 by Harald Welte &lt;laforge@gnumonks.org&gt;
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later &lt;http://gnu.org/licenses/gpl-2.0.html&gt;
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
04:24:03.069750 run    osmo-stp_10.42.42.5(pid=8062): stderr: 
| �[0;m�[38;5;43m20221214042401222 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214042401222 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214042401222 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214042401222 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214042401223 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214042401223 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214042401223 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
04:24:03.234695 run    osmo-stp_10.42.42.5(pid=8062): stdout: 
| (launched: 2022-12-14_04:24:00.937015)
| Copyright (C) 2015-2020 by Harald Welte &lt;laforge@gnumonks.org&gt;
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later &lt;http://gnu.org/licenses/gpl-2.0.html&gt;
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
04:24:03.372543 run    osmo-stp_10.42.42.5(pid=8062): stderr: 
| �[0;m�[38;5;43m20221214042401222 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214042401222 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214042401222 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214042401222 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214042401223 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214042401223 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214042401223 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
04:24:03.539427 run               patchelf(pid=8113): Terminating (SIGINT)
04:24:03.745192 run               patchelf(pid=8113): Terminated: ok {rc=0}
04:24:03.785370 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=8062): Process ended prematurely: osmo-stp_10.42.42.5(pid=8062) [trial-2399↪gprs:trx-lms↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8062)]  [trial-2399↪gprs:trx-lms↪ping.py:22]
04:24:03.796594 tst                       ping.py:22: Test FAILED (7.1 sec)
04:24:03.868682 run    osmo-hlr_10.42.42.2(pid=8059): ERR: Terminated: ERROR {rc=237}  [trial-2399↪gprs:trx-lms↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8059)]
04:24:03.934157 run    osmo-hlr_10.42.42.2(pid=8059): stdout: 
| (launched: 2022-12-14_04:23:59.998121) 
04:24:04.004725 run    osmo-hlr_10.42.42.2(pid=8059): stderr: 
| �[0;m�[1;31m20221214042400171 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214042400171 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214042400171 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214042400171 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214042400171 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214042400171 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214042400183 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2399/run.2022-12-14_03-34-50/gprs:trx-lms/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214042400192 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214042400192 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214042400192 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
04:24:04.060390 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8058): Terminating (SIGTERM)
04:24:04.111723 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8061): Terminating (SIGTERM)
04:24:04.160799 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8100): Terminating (SIGTERM)
04:24:04.172098 ---      ParallelTerminationStrategy: PID 8058 died...
04:24:04.247485 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8058): Terminated: ok {rc=0}
04:24:04.260906 ---      ParallelTerminationStrategy: PID 8061 died...
04:24:04.322169 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8061): Terminated: ok {rc=0}
04:24:04.334334 ---      ParallelTerminationStrategy: PID 8100 died...
04:24:04.400344 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8100): Terminated: ok {rc=0}
04:24:04.500250 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8062): Process ended prematurely: osmo-stp_10.42.42.5(pid=8062) [trial-2399↪gprs:trx-lms↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8062)]