Failed
gprs:trx-b200+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=6150): Process ended prematurely: osmo-stp_10.42.42.5(pid=6150) [trial-2399↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6150)]
Standard Output
---------------------------------------------- trial-2399 gprs:trx-b200+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 04:00:16.639913 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:00:16.651516 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 04:00:16.823564 tst cs_paging_gprs_active.py: using LAC 38397 04:00:16.987617 tst cs_paging_gprs_active.py: using RAC 147 04:00:17.120877 tst cs_paging_gprs_active.py: using CellId 38397 04:00:17.263021 tst cs_paging_gprs_active.py: using BVCI 38398 04:00:17.289728 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:00:17.301967 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:00:17.314143 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:00:17.326455 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:00:17.339823 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:00:17.353176 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:00:17.366566 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:00:17.381720 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:00:17.394618 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 04:00:17.512634 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 04:00:17.811912 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 04:00:17.949795 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:00:18.291574 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6140): Launched 04:00:18.575977 run iperf3-srv_10.42.42.10(pid=6141): Launched 04:00:18.777434 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 04:00:18.915103 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:00:19.256903 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6142): Launched 04:00:19.539900 run iperf3-srv_10.42.42.10(pid=6143): Launched 04:00:19.741315 tst cs_paging_gprs_active.py:38: start network... 04:00:19.879190 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:00:20.401805 run create_hlr_db(pid=6144): Launched 04:00:20.590662 bus /gobi_6: Setting Powered False 04:00:21.612233 run create_hlr_db(pid=6144): Terminated: ok {rc=0} 04:00:22.024277 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6146): Launched 04:00:22.335334 run osmo-hlr_10.42.42.2(pid=6147): Launched 04:00:22.457253 run osmo-stp_10.42.42.5: Starting osmo-stp 04:00:22.999129 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6149): Launched 04:00:23.306320 run osmo-stp_10.42.42.5(pid=6150): Launched 04:00:23.417516 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:00:23.951851 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6153): Launched 04:00:24.060672 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:00:24.329804 run patchelf(pid=6154): Launched 04:00:24.510020 run osmo-stp_10.42.42.5(pid=6150): ERR: Terminated: ERROR {rc=1} [trial-2399↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6150)] 04:00:24.641294 run osmo-stp_10.42.42.5(pid=6150): stdout: | (launched: 2022-12-14_04:00:23.154726) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:00:24.772500 run osmo-stp_10.42.42.5(pid=6150): stderr: | �[0;m�[38;5;43m20221214040023325 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214040023325 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214040023325 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214040023326 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214040023326 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214040023326 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214040023326 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:00:24.899408 run osmo-stp_10.42.42.5(pid=6150): stdout: | (launched: 2022-12-14_04:00:23.154726) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:00:25.025263 run osmo-stp_10.42.42.5(pid=6150): stderr: | �[0;m�[38;5;43m20221214040023325 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214040023325 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214040023325 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214040023326 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214040023326 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214040023326 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214040023326 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:00:25.171490 run patchelf(pid=6154): Terminating (SIGINT) 04:00:25.343202 run patchelf(pid=6154): Terminated: ok {rc=0} 04:00:25.374771 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=6150): Process ended prematurely: osmo-stp_10.42.42.5(pid=6150) [trial-2399↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6150)] [trial-2399↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 04:00:25.384104 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 04:00:25.443951 run osmo-hlr_10.42.42.2(pid=6147): ERR: Terminated: ERROR {rc=237} [trial-2399↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=6147)] 04:00:25.492716 run osmo-hlr_10.42.42.2(pid=6147): stdout: | (launched: 2022-12-14_04:00:22.181845) 04:00:25.542036 run osmo-hlr_10.42.42.2(pid=6147): stderr: | �[0;m�[1;31m20221214040022357 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214040022357 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214040022357 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214040022357 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214040022357 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214040022357 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214040022370 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2399/run.2022-12-14_03-34-50/gprs:trx-b200+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214040022379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214040022379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214040022379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:00:25.584032 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6140): Terminating (SIGTERM) 04:00:25.623324 run iperf3-srv_10.42.42.10(pid=6141): Terminating (SIGTERM) 04:00:25.662731 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6142): Terminating (SIGTERM) 04:00:25.702031 run iperf3-srv_10.42.42.10(pid=6143): Terminating (SIGTERM) 04:00:25.741402 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6146): Terminating (SIGTERM) 04:00:25.780721 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6149): Terminating (SIGTERM) 04:00:25.820092 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6153): Terminating (SIGTERM) 04:00:25.829225 --- ParallelTerminationStrategy: PID 6140 died... 04:00:25.882135 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6140): Terminated: ok {rc=0} 04:00:25.891561 --- ParallelTerminationStrategy: PID 6141 died... 04:00:25.943898 run iperf3-srv_10.42.42.10(pid=6141): Terminated {rc=256} 04:00:25.953342 --- ParallelTerminationStrategy: PID 6142 died... 04:00:26.005917 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6142): Terminated: ok {rc=0} 04:00:26.015290 --- ParallelTerminationStrategy: PID 6143 died... 04:00:26.067467 run iperf3-srv_10.42.42.10(pid=6143): Terminated {rc=256} 04:00:26.076811 --- ParallelTerminationStrategy: PID 6146 died... 04:00:26.129102 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6146): Terminated: ok {rc=0} 04:00:26.138438 --- ParallelTerminationStrategy: PID 6149 died... 04:00:26.191465 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6149): Terminated: ok {rc=0} 04:00:26.200886 --- ParallelTerminationStrategy: PID 6153 died... 04:00:26.253245 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6153): Terminated: ok {rc=0} 04:00:26.340848 bus /gobi_0: Setting Powered False 04:00:27.445173 bus /gobi_0: Setting Powered False 04:00:28.555121 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=6150): Process ended prematurely: osmo-stp_10.42.42.5(pid=6150) [trial-2399↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6150)]