Failed
gprs:oc2g+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=13910): Process ended prematurely: osmo-stp_10.42.42.5(pid=13910) [trial-2400↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13910)]
Standard Output
---------------------------------------------- trial-2400 gprs:oc2g+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 05:45:23.787240 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:45:23.799083 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 05:45:23.961792 tst cs_paging_gprs_active.py: using LAC 38812 05:45:24.092702 tst cs_paging_gprs_active.py: using RAC 52 05:45:24.224525 tst cs_paging_gprs_active.py: using CellId 38812 05:45:24.355092 tst cs_paging_gprs_active.py: using BVCI 38813 05:45:24.382741 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:45:24.394877 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:45:24.406964 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:45:24.419025 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:45:24.431123 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:45:24.443280 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:45:24.455791 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:45:24.467834 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:45:24.480153 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 05:45:24.607083 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 05:45:24.915265 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 05:45:25.059113 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:45:25.424860 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13899): Launched 05:45:25.732498 run iperf3-srv_10.42.42.10(pid=13900): Launched 05:45:25.941389 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 05:45:26.084325 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:45:26.446389 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13901): Launched 05:45:26.752851 run iperf3-srv_10.42.42.10(pid=13902): Launched 05:45:26.962200 tst cs_paging_gprs_active.py:38: start network... 05:45:27.106054 run osmo-hlr_10.42.42.2: Starting osmo-hlr 05:45:27.690771 run create_hlr_db(pid=13903): Launched 05:45:27.889637 bus /gobi_6: Setting Powered False 05:45:28.896740 run create_hlr_db(pid=13903): Terminated: ok {rc=0} 05:45:29.358527 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13906): Launched 05:45:29.698507 run osmo-hlr_10.42.42.2(pid=13907): Launched 05:45:29.816777 run osmo-stp_10.42.42.5: Starting osmo-stp 05:45:30.365097 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13909): Launched 05:45:30.681739 run osmo-stp_10.42.42.5(pid=13910): Launched 05:45:30.797786 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 05:45:31.445635 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13912): Launched 05:45:31.561655 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 05:45:31.857732 run patchelf(pid=13913): Launched 05:45:32.047281 run osmo-stp_10.42.42.5(pid=13910): ERR: Terminated: ERROR {rc=1} [trial-2400↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13910)] 05:45:32.185751 run osmo-stp_10.42.42.5(pid=13910): stdout: | (launched: 2022-12-14_05:45:30.525564) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:45:32.323503 run osmo-stp_10.42.42.5(pid=13910): stderr: | �[0;m�[38;5;43m20221214054530701 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214054530701 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214054530702 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214054530702 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214054530702 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214054530703 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214054530703 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:45:32.454909 run osmo-stp_10.42.42.5(pid=13910): stdout: | (launched: 2022-12-14_05:45:30.525564) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:45:32.584594 run osmo-stp_10.42.42.5(pid=13910): stderr: | �[0;m�[38;5;43m20221214054530701 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214054530701 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214054530702 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214054530702 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214054530702 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214054530703 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214054530703 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:45:32.737077 run patchelf(pid=13913): Terminating (SIGINT) 05:45:32.915083 run patchelf(pid=13913): Terminated: ok {rc=0} 05:45:32.947875 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=13910): Process ended prematurely: osmo-stp_10.42.42.5(pid=13910) [trial-2400↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13910)] [trial-2400↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 05:45:32.957384 tst cs_paging_gprs_active.py:38: Test FAILED (9.2 sec) 05:45:33.018786 run osmo-hlr_10.42.42.2(pid=13907): ERR: Terminated: ERROR {rc=237} [trial-2400↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13907)] 05:45:33.068739 run osmo-hlr_10.42.42.2(pid=13907): stdout: | (launched: 2022-12-14_05:45:29.530024) 05:45:33.119176 run osmo-hlr_10.42.42.2(pid=13907): stderr: | �[0;m�[1;31m20221214054529713 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214054529713 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214054529713 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214054529713 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214054529713 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214054529713 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214054529729 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2400/run.2022-12-14_05-28-31/gprs:oc2g+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214054529737 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214054529737 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214054529737 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 05:45:33.162272 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13899): Terminating (SIGTERM) 05:45:33.202834 run iperf3-srv_10.42.42.10(pid=13900): Terminating (SIGTERM) 05:45:33.243778 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13901): Terminating (SIGTERM) 05:45:33.284299 run iperf3-srv_10.42.42.10(pid=13902): Terminating (SIGTERM) 05:45:33.325435 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13906): Terminating (SIGTERM) 05:45:33.366190 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13909): Terminating (SIGTERM) 05:45:33.406860 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13912): Terminating (SIGTERM) 05:45:33.415644 --- ParallelTerminationStrategy: PID 13899 died... 05:45:33.470699 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13899): Terminated: ok {rc=0} 05:45:33.480390 --- ParallelTerminationStrategy: PID 13900 died... 05:45:33.534683 run iperf3-srv_10.42.42.10(pid=13900): Terminated {rc=256} 05:45:33.544307 --- ParallelTerminationStrategy: PID 13901 died... 05:45:33.598553 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13901): Terminated: ok {rc=0} 05:45:33.608194 --- ParallelTerminationStrategy: PID 13902 died... 05:45:33.662448 run iperf3-srv_10.42.42.10(pid=13902): Terminated {rc=256} 05:45:33.672153 --- ParallelTerminationStrategy: PID 13906 died... 05:45:33.726773 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13906): Terminated: ok {rc=0} 05:45:33.736456 --- ParallelTerminationStrategy: PID 13909 died... 05:45:33.791253 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13909): Terminated: ok {rc=0} 05:45:33.801159 --- ParallelTerminationStrategy: PID 13912 died... 05:45:33.855882 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13912): Terminated: ok {rc=0} 05:45:33.944747 bus /gobi_0: Setting Powered False 05:45:35.047974 bus /gobi_0: Setting Powered False 05:45:36.160856 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13910): Process ended prematurely: osmo-stp_10.42.42.5(pid=13910) [trial-2400↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13910)]