Failed
gprs:trx-umtrx+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=16208): Process ended prematurely: osmo-stp_10.42.42.5(pid=16208) [trial-2400↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16208)]
Standard Output
---------------------------------------------- trial-2400 gprs:trx-umtrx+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 06:10:27.055419 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:10:27.066330 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 06:10:27.226053 tst cs_paging_gprs_active.py: using LAC 38944 06:10:27.352246 tst cs_paging_gprs_active.py: using RAC 184 06:10:27.476931 tst cs_paging_gprs_active.py: using CellId 38944 06:10:27.602660 tst cs_paging_gprs_active.py: using BVCI 38945 06:10:27.626862 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:10:27.637810 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:10:27.648586 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:10:27.659354 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:10:27.670511 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:10:27.681667 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:10:27.692746 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:10:27.703834 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:10:27.715157 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 06:10:27.838582 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 06:10:28.129784 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 06:10:28.261938 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:10:28.590530 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16198): Launched 06:10:28.863570 run iperf3-srv_10.42.42.10(pid=16199): Launched 06:10:29.057317 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 06:10:29.189346 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:10:29.517186 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16200): Launched 06:10:29.789428 run iperf3-srv_10.42.42.10(pid=16201): Launched 06:10:29.982583 tst cs_paging_gprs_active.py:38: start network... 06:10:30.114492 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:10:30.612218 run create_hlr_db(pid=16202): Launched 06:10:30.793915 bus /gobi_6: Setting Powered False 06:10:31.817822 run create_hlr_db(pid=16202): Terminated: ok {rc=0} 06:10:32.268791 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16204): Launched 06:10:32.587492 run osmo-hlr_10.42.42.2(pid=16205): Launched 06:10:32.712900 run osmo-stp_10.42.42.5: Starting osmo-stp 06:10:33.266352 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16207): Launched 06:10:33.583484 run osmo-stp_10.42.42.5(pid=16208): Launched 06:10:33.699547 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:10:34.253070 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16210): Launched 06:10:34.365761 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:10:34.649285 run patchelf(pid=16211): Launched 06:10:34.834280 run osmo-stp_10.42.42.5(pid=16208): ERR: Terminated: ERROR {rc=1} [trial-2400↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16208)] 06:10:34.969443 run osmo-stp_10.42.42.5(pid=16208): stdout: | (launched: 2022-12-14_06:10:33.426951) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:10:35.105211 run osmo-stp_10.42.42.5(pid=16208): stderr: | �[0;m�[38;5;43m20221214061033600 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214061033600 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214061033600 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214061033600 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214061033601 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214061033601 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214061033601 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:10:35.235998 run osmo-stp_10.42.42.5(pid=16208): stdout: | (launched: 2022-12-14_06:10:33.426951) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:10:35.365262 run osmo-stp_10.42.42.5(pid=16208): stderr: | �[0;m�[38;5;43m20221214061033600 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214061033600 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214061033600 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214061033600 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214061033601 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214061033601 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214061033601 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:10:35.515799 run patchelf(pid=16211): Terminating (SIGINT) 06:10:35.693154 run patchelf(pid=16211): Terminated: ok {rc=0} 06:10:35.725725 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=16208): Process ended prematurely: osmo-stp_10.42.42.5(pid=16208) [trial-2400↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16208)] [trial-2400↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 06:10:35.735132 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 06:10:35.795616 run osmo-hlr_10.42.42.2(pid=16205): ERR: Terminated: ERROR {rc=237} [trial-2400↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16205)] 06:10:35.845018 run osmo-hlr_10.42.42.2(pid=16205): stdout: | (launched: 2022-12-14_06:10:32.429754) 06:10:35.894802 run osmo-hlr_10.42.42.2(pid=16205): stderr: | �[0;m�[1;31m20221214061032608 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214061032608 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214061032608 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214061032608 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214061032608 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214061032608 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214061032619 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2400/run.2022-12-14_05-28-31/gprs:trx-umtrx+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214061032627 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214061032627 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214061032627 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:10:35.937401 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16198): Terminating (SIGTERM) 06:10:35.977289 run iperf3-srv_10.42.42.10(pid=16199): Terminating (SIGTERM) 06:10:36.017099 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16200): Terminating (SIGTERM) 06:10:36.056850 run iperf3-srv_10.42.42.10(pid=16201): Terminating (SIGTERM) 06:10:36.096629 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16204): Terminating (SIGTERM) 06:10:36.136552 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16207): Terminating (SIGTERM) 06:10:36.176430 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16210): Terminating (SIGTERM) 06:10:36.185815 --- ParallelTerminationStrategy: PID 16198 died... 06:10:36.239353 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16198): Terminated: ok {rc=0} 06:10:36.249015 --- ParallelTerminationStrategy: PID 16199 died... 06:10:36.302435 run iperf3-srv_10.42.42.10(pid=16199): Terminated {rc=256} 06:10:36.312082 --- ParallelTerminationStrategy: PID 16200 died... 06:10:36.365564 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16200): Terminated: ok {rc=0} 06:10:36.375182 --- ParallelTerminationStrategy: PID 16201 died... 06:10:36.428638 run iperf3-srv_10.42.42.10(pid=16201): Terminated {rc=256} 06:10:36.438373 --- ParallelTerminationStrategy: PID 16204 died... 06:10:36.492166 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16204): Terminated: ok {rc=0} 06:10:36.501857 --- ParallelTerminationStrategy: PID 16207 died... 06:10:36.555274 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16207): Terminated: ok {rc=0} 06:10:36.565148 --- ParallelTerminationStrategy: PID 16210 died... 06:10:36.618600 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16210): Terminated: ok {rc=0} 06:10:36.706812 bus /gobi_0: Setting Powered False 06:10:37.810261 bus /gobi_0: Setting Powered False 06:10:38.921785 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16208): Process ended prematurely: osmo-stp_10.42.42.5(pid=16208) [trial-2400↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16208)]