Failed
gprs:trx-umtrx+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=8867): Process ended prematurely: osmo-stp_10.42.42.5(pid=8867) [trial-2403↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8867)]
Standard Output
---------------------------------------------- trial-2403 gprs:trx-umtrx+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 10:35:12.992505 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:35:13.003427 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 10:35:13.164854 tst cs_paging_gprs_active.py: using LAC 40332 10:35:13.283855 tst cs_paging_gprs_active.py: using RAC 42 10:35:13.409455 tst cs_paging_gprs_active.py: using CellId 40332 10:35:13.529716 tst cs_paging_gprs_active.py: using BVCI 40333 10:35:13.552822 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:35:13.563785 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:35:13.574585 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:35:13.585359 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:35:13.596746 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:35:13.607895 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:35:13.619096 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:35:13.630073 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:35:13.641609 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 10:35:13.763756 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 10:35:14.047902 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:35:14.174436 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:35:14.492118 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8857): Launched 10:35:14.756673 run iperf3-srv_10.42.42.10(pid=8858): Launched 10:35:14.941967 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:35:15.068037 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:35:15.384153 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8859): Launched 10:35:15.648829 run iperf3-srv_10.42.42.10(pid=8860): Launched 10:35:15.834247 tst cs_paging_gprs_active.py:38: start network... 10:35:15.974269 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:35:16.502205 run create_hlr_db(pid=8861): Launched 10:35:16.694633 bus /gobi_6: Setting Powered False 10:35:17.712304 run create_hlr_db(pid=8861): Terminated: ok {rc=0} 10:35:18.122005 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8863): Launched 10:35:18.427737 run osmo-hlr_10.42.42.2(pid=8864): Launched 10:35:18.544924 run osmo-stp_10.42.42.5: Starting osmo-stp 10:35:19.081285 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8866): Launched 10:35:19.385855 run osmo-stp_10.42.42.5(pid=8867): Launched 10:35:19.496089 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:35:20.026757 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8869): Launched 10:35:20.134859 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:35:20.405323 run patchelf(pid=8870): Launched 10:35:20.583841 run osmo-stp_10.42.42.5(pid=8867): ERR: Terminated: ERROR {rc=1} [trial-2403↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8867)] 10:35:20.714953 run osmo-stp_10.42.42.5(pid=8867): stdout: | (launched: 2022-12-14_10:35:19.235238) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:35:20.845979 run osmo-stp_10.42.42.5(pid=8867): stderr: | �[0;m�[38;5;43m20221214103519403 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214103519403 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214103519404 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214103519404 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214103519404 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214103519405 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214103519405 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:35:20.972056 run osmo-stp_10.42.42.5(pid=8867): stdout: | (launched: 2022-12-14_10:35:19.235238) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:35:21.097671 run osmo-stp_10.42.42.5(pid=8867): stderr: | �[0;m�[38;5;43m20221214103519403 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214103519403 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214103519404 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214103519404 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214103519404 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214103519405 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214103519405 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:35:21.243871 run patchelf(pid=8870): Terminating (SIGINT) 10:35:21.415519 run patchelf(pid=8870): Terminated: ok {rc=0} 10:35:21.447226 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=8867): Process ended prematurely: osmo-stp_10.42.42.5(pid=8867) [trial-2403↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8867)] [trial-2403↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 10:35:21.456638 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 10:35:21.518706 run osmo-hlr_10.42.42.2(pid=8864): ERR: Terminated: ERROR {rc=237} [trial-2403↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8864)] 10:35:21.568745 run osmo-hlr_10.42.42.2(pid=8864): stdout: | (launched: 2022-12-14_10:35:18.277141) 10:35:21.619461 run osmo-hlr_10.42.42.2(pid=8864): stderr: | �[0;m�[1;31m20221214103518454 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214103518454 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214103518454 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214103518454 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214103518454 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214103518454 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214103518471 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2403/run.2022-12-14_09-52-37/gprs:trx-umtrx+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214103518480 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214103518480 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214103518481 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:35:21.662577 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8857): Terminating (SIGTERM) 10:35:21.703184 run iperf3-srv_10.42.42.10(pid=8858): Terminating (SIGTERM) 10:35:21.743747 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8859): Terminating (SIGTERM) 10:35:21.784300 run iperf3-srv_10.42.42.10(pid=8860): Terminating (SIGTERM) 10:35:21.825190 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8863): Terminating (SIGTERM) 10:35:21.865871 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8866): Terminating (SIGTERM) 10:35:21.906640 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8869): Terminating (SIGTERM) 10:35:21.915780 --- ParallelTerminationStrategy: PID 8857 died... 10:35:21.970716 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8857): Terminated: ok {rc=0} 10:35:21.980215 --- ParallelTerminationStrategy: PID 8858 died... 10:35:22.034932 run iperf3-srv_10.42.42.10(pid=8858): Terminated {rc=256} 10:35:22.044375 --- ParallelTerminationStrategy: PID 8859 died... 10:35:22.099326 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8859): Terminated: ok {rc=0} 10:35:22.108840 --- ParallelTerminationStrategy: PID 8860 died... 10:35:22.163337 run iperf3-srv_10.42.42.10(pid=8860): Terminated {rc=256} 10:35:22.172786 --- ParallelTerminationStrategy: PID 8863 died... 10:35:22.227707 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8863): Terminated: ok {rc=0} 10:35:22.237349 --- ParallelTerminationStrategy: PID 8866 died... 10:35:22.292206 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8866): Terminated: ok {rc=0} 10:35:22.301785 --- ParallelTerminationStrategy: PID 8869 died... 10:35:22.356502 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8869): Terminated: ok {rc=0} 10:35:22.445749 bus /gobi_0: Setting Powered False 10:35:23.549789 bus /gobi_0: Setting Powered False 10:35:24.661134 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8867): Process ended prematurely: osmo-stp_10.42.42.5(pid=8867) [trial-2403↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8867)]