Failed
gprs:trx-lms-limenet-micro.iperf3.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=21454): Process ended prematurely: osmo-stp_10.42.42.5(pid=21454) [trial-2404↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21454)]
Standard Output
---------------------------------------------- trial-2404 gprs:trx-lms-limenet-micro iperf3.py ---------------------------------------------- 12:22:34.602095 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 12:22:34.614080 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 12:22:34.758501 tst iperf3.py: using LAC 40868 12:22:34.887002 tst iperf3.py: using RAC 68 12:22:35.014889 tst iperf3.py: using CellId 40868 12:22:35.143719 tst iperf3.py: using BVCI 40869 12:22:35.168872 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 12:22:35.180240 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 12:22:35.191349 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 12:22:35.202382 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 12:22:35.213366 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 12:22:35.224293 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 12:22:35.235486 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 12:22:35.246513 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 12:22:35.257639 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 12:22:35.538659 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 12:22:35.666610 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:22:35.988229 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21446): Launched 12:22:36.255983 run iperf3-srv_10.42.42.10(pid=21447): Launched 12:22:36.442552 tst iperf3.py:8: start network... 12:22:36.570451 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:22:37.054047 run create_hlr_db(pid=21448): Launched 12:22:37.229953 bus /gobi_6: Setting Powered False 12:22:38.262914 run create_hlr_db(pid=21448): Terminated: ok {rc=0} 12:22:38.675958 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21450): Launched 12:22:38.985910 run osmo-hlr_10.42.42.2(pid=21451): Launched 12:22:39.105557 run osmo-stp_10.42.42.5: Starting osmo-stp 12:22:39.650468 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21453): Launched 12:22:39.958825 run osmo-stp_10.42.42.5(pid=21454): Launched 12:22:40.080410 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:22:40.619009 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21456): Launched 12:22:40.728014 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:22:40.995964 run patchelf(pid=21457): Launched 12:22:41.175799 run osmo-stp_10.42.42.5(pid=21454): ERR: Terminated: ERROR {rc=1} [trial-2404↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21454)] 12:22:41.307330 run osmo-stp_10.42.42.5(pid=21454): stdout: | (launched: 2022-12-14_12:22:39.805134) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:22:41.439680 run osmo-stp_10.42.42.5(pid=21454): stderr: | �[0;m�[38;5;43m20221214122239978 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214122239978 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214122239978 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214122239978 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214122239979 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214122239979 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214122239979 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:22:41.567168 run osmo-stp_10.42.42.5(pid=21454): stdout: | (launched: 2022-12-14_12:22:39.805134) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:22:41.693277 run osmo-stp_10.42.42.5(pid=21454): stderr: | �[0;m�[38;5;43m20221214122239978 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214122239978 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214122239978 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214122239978 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214122239979 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214122239979 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214122239979 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:22:41.840002 run patchelf(pid=21457): Terminating (SIGINT) 12:22:42.012296 run patchelf(pid=21457): Terminated: ok {rc=0} 12:22:42.043827 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=21454): Process ended prematurely: osmo-stp_10.42.42.5(pid=21454) [trial-2404↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21454)] [trial-2404↪gprs:trx-lms-limenet-micro↪iperf3.py:8] 12:22:42.053107 tst iperf3.py:8: Test FAILED (7.5 sec) 12:22:42.113368 run osmo-hlr_10.42.42.2(pid=21451): ERR: Terminated: ERROR {rc=237} [trial-2404↪gprs:trx-lms-limenet-micro↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21451)] 12:22:42.162028 run osmo-hlr_10.42.42.2(pid=21451): stdout: | (launched: 2022-12-14_12:22:38.831590) 12:22:42.211330 run osmo-hlr_10.42.42.2(pid=21451): stderr: | �[0;m�[1;31m20221214122239010 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214122239010 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214122239011 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214122239011 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214122239011 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214122239011 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214122239022 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2404/run.2022-12-14_11-25-45/gprs:trx-lms-limenet-micro/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214122239030 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214122239030 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214122239030 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:22:42.253575 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21446): Terminating (SIGTERM) 12:22:42.293516 run iperf3-srv_10.42.42.10(pid=21447): Terminating (SIGTERM) 12:22:42.333431 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21450): Terminating (SIGTERM) 12:22:42.373412 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21453): Terminating (SIGTERM) 12:22:42.413699 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21456): Terminating (SIGTERM) 12:22:42.423068 --- ParallelTerminationStrategy: PID 21446 died... 12:22:42.477114 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21446): Terminated: ok {rc=0} 12:22:42.486851 --- ParallelTerminationStrategy: PID 21447 died... 12:22:42.540606 run iperf3-srv_10.42.42.10(pid=21447): Terminated {rc=256} 12:22:42.550231 --- ParallelTerminationStrategy: PID 21450 died... 12:22:42.604132 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21450): Terminated: ok {rc=0} 12:22:42.613948 --- ParallelTerminationStrategy: PID 21453 died... 12:22:42.667805 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21453): Terminated: ok {rc=0} 12:22:42.677946 --- ParallelTerminationStrategy: PID 21456 died... 12:22:42.731730 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21456): Terminated: ok {rc=0} 12:22:42.820074 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21454): Process ended prematurely: osmo-stp_10.42.42.5(pid=21454) [trial-2404↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21454)]