Failed
dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any.switch_tch_pdch.py (from dynts_trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any)
Stacktrace
osmo-stp_10.42.42.5(pid=28352): Process ended prematurely: osmo-stp_10.42.42.5(pid=28352) [trial-2405↪dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28352)]
Standard Output
---------------------------------------------- trial-2405 dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any switch_tch_pdch.py ---------------------------------------------- 13:37:40.763688 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 13:37:40.775514 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x bts (candidates: 1) 13:37:40.939434 tst switch_tch_pdch.py: using LAC 41264 13:37:41.064167 tst switch_tch_pdch.py: using RAC 209 13:37:41.190260 tst switch_tch_pdch.py: using CellId 41264 13:37:41.309578 tst switch_tch_pdch.py: using BVCI 41265 13:37:41.332225 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 13:37:41.343622 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 13:37:41.354736 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 13:37:41.365850 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 13:37:41.376682 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 13:37:41.387479 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 13:37:41.398401 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 13:37:41.409341 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 13:37:41.529343 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 13:37:41.805859 tst switch_tch_pdch.py:51: start network... 13:37:41.930229 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:37:42.408572 run create_hlr_db(pid=28346): Launched 13:37:42.580375 bus /gobi_6: Setting Powered False 13:37:43.601113 run create_hlr_db(pid=28346): Terminated: ok {rc=0} 13:37:43.997294 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28348): Launched 13:37:44.296069 run osmo-hlr_10.42.42.2(pid=28349): Launched 13:37:44.413334 run osmo-stp_10.42.42.5: Starting osmo-stp 13:37:44.933967 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28351): Launched 13:37:45.232115 run osmo-stp_10.42.42.5(pid=28352): Launched 13:37:45.340815 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:37:45.882906 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28354): Launched 13:37:45.999172 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:37:46.281410 run patchelf(pid=28355): Launched 13:37:46.528496 run osmo-stp_10.42.42.5(pid=28352): ERR: Terminated: ERROR {rc=1} [trial-2405↪dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28352)] 13:37:46.666725 run osmo-stp_10.42.42.5(pid=28352): stdout: | (launched: 2022-12-14_13:37:45.085311) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:37:46.796772 run osmo-stp_10.42.42.5(pid=28352): stderr: | �[0;m�[38;5;43m20221214133745254 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214133745254 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214133745254 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214133745255 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214133745255 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214133745255 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214133745255 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:37:46.923088 run osmo-stp_10.42.42.5(pid=28352): stdout: | (launched: 2022-12-14_13:37:45.085311) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:37:47.047337 run osmo-stp_10.42.42.5(pid=28352): stderr: | �[0;m�[38;5;43m20221214133745254 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214133745254 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214133745254 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214133745255 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214133745255 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214133745255 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214133745255 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:37:47.207906 run patchelf(pid=28355): Terminating (SIGINT) 13:37:47.388877 run patchelf(pid=28355): Terminated: ok {rc=0} 13:37:47.421912 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=28352): Process ended prematurely: osmo-stp_10.42.42.5(pid=28352) [trial-2405↪dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28352)] [trial-2405↪dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54] 13:37:47.431650 tst switch_tch_pdch.py:54: Test FAILED (6.7 sec) 13:37:47.495827 run osmo-hlr_10.42.42.2(pid=28349): ERR: Terminated: ERROR {rc=237} [trial-2405↪dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28349)] 13:37:47.547879 run osmo-hlr_10.42.42.2(pid=28349): stdout: | (launched: 2022-12-14_13:37:44.149291) 13:37:47.601382 run osmo-hlr_10.42.42.2(pid=28349): stderr: | �[0;m�[1;31m20221214133744326 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214133744326 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214133744326 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214133744326 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214133744326 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214133744326 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214133744337 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2405/run.2022-12-14_12-53-19/dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214133744347 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214133744347 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214133744347 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:37:47.646481 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28348): Terminating (SIGTERM) 13:37:47.689237 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28351): Terminating (SIGTERM) 13:37:47.731882 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28354): Terminating (SIGTERM) 13:37:47.741635 --- ParallelTerminationStrategy: PID 28348 died... 13:37:47.798364 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28348): Terminated: ok {rc=0} 13:37:47.808480 --- ParallelTerminationStrategy: PID 28351 died... 13:37:47.865036 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28351): Terminated: ok {rc=0} 13:37:47.875125 --- ParallelTerminationStrategy: PID 28354 died... 13:37:47.931531 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28354): Terminated: ok {rc=0} 13:37:48.017853 bus /gobi_0: Setting Powered False 13:37:49.123391 bus /gobi_0: Setting Powered False 13:37:50.231563 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28352): Process ended prematurely: osmo-stp_10.42.42.5(pid=28352) [trial-2405↪dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28352)]