Failed
gprs:trx-b200+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=26055): Process ended prematurely: osmo-stp_10.42.42.5(pid=26055) [trial-2405↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26055)]
Standard Output
---------------------------------------------- trial-2405 gprs:trx-b200+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 13:16:33.431466 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:16:33.442518 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 13:16:33.589554 tst cs_paging_gprs_active.py: using LAC 41153 13:16:33.720684 tst cs_paging_gprs_active.py: using RAC 98 13:16:33.846031 tst cs_paging_gprs_active.py: using CellId 41153 13:16:33.973396 tst cs_paging_gprs_active.py: using BVCI 41154 13:16:33.998262 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:16:34.009462 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:16:34.020400 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:16:34.031372 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:16:34.042748 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:16:34.054007 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:16:34.065578 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:16:34.076869 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:16:34.088436 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 13:16:34.207507 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 13:16:34.487217 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:16:34.613161 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:16:34.926741 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26045): Launched 13:16:35.186547 run iperf3-srv_10.42.42.10(pid=26046): Launched 13:16:35.370478 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:16:35.495992 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:16:35.808906 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26047): Launched 13:16:36.067854 run iperf3-srv_10.42.42.10(pid=26048): Launched 13:16:36.251981 tst cs_paging_gprs_active.py:38: start network... 13:16:36.377849 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:16:36.861043 run create_hlr_db(pid=26049): Launched 13:16:37.035011 bus /gobi_6: Setting Powered False 13:16:38.057199 run create_hlr_db(pid=26049): Terminated: ok {rc=0} 13:16:38.487729 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26051): Launched 13:16:38.813449 run osmo-hlr_10.42.42.2(pid=26052): Launched 13:16:38.934248 run osmo-stp_10.42.42.5: Starting osmo-stp 13:16:39.497517 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26054): Launched 13:16:39.821934 run osmo-stp_10.42.42.5(pid=26055): Launched 13:16:39.940437 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:16:40.505770 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26057): Launched 13:16:40.622395 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:16:40.905927 run patchelf(pid=26058): Launched 13:16:41.096081 run osmo-stp_10.42.42.5(pid=26055): ERR: Terminated: ERROR {rc=1} [trial-2405↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26055)] 13:16:41.235231 run osmo-stp_10.42.42.5(pid=26055): stdout: | (launched: 2022-12-14_13:16:39.662543) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:16:41.374933 run osmo-stp_10.42.42.5(pid=26055): stderr: | �[0;m�[38;5;43m20221214131639857 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214131639857 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214131639857 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214131639857 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214131639858 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214131639858 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214131639858 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:16:41.509520 run osmo-stp_10.42.42.5(pid=26055): stdout: | (launched: 2022-12-14_13:16:39.662543) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:16:41.643203 run osmo-stp_10.42.42.5(pid=26055): stderr: | �[0;m�[38;5;43m20221214131639857 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214131639857 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214131639857 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214131639857 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214131639858 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214131639858 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214131639858 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:16:41.799091 run patchelf(pid=26058): Terminating (SIGINT) 13:16:41.981168 run patchelf(pid=26058): Terminated: ok {rc=0} 13:16:42.014482 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=26055): Process ended prematurely: osmo-stp_10.42.42.5(pid=26055) [trial-2405↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26055)] [trial-2405↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 13:16:42.024265 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 13:16:42.087215 run osmo-hlr_10.42.42.2(pid=26052): ERR: Terminated: ERROR {rc=237} [trial-2405↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26052)] 13:16:42.138694 run osmo-hlr_10.42.42.2(pid=26052): stdout: | (launched: 2022-12-14_13:16:38.653250) 13:16:42.190644 run osmo-hlr_10.42.42.2(pid=26052): stderr: | �[0;m�[1;31m20221214131638851 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214131638851 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214131638851 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214131638851 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214131638851 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214131638852 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214131638864 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2405/run.2022-12-14_12-53-19/gprs:trx-b200+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214131638874 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214131638874 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214131638874 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:16:42.235037 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26045): Terminating (SIGTERM) 13:16:42.276625 run iperf3-srv_10.42.42.10(pid=26046): Terminating (SIGTERM) 13:16:42.318419 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26047): Terminating (SIGTERM) 13:16:42.359865 run iperf3-srv_10.42.42.10(pid=26048): Terminating (SIGTERM) 13:16:42.401496 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26051): Terminating (SIGTERM) 13:16:42.443040 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26054): Terminating (SIGTERM) 13:16:42.484535 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26057): Terminating (SIGTERM) 13:16:42.494097 --- ParallelTerminationStrategy: PID 26045 died... 13:16:42.550142 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26045): Terminated: ok {rc=0} 13:16:42.559990 --- ParallelTerminationStrategy: PID 26046 died... 13:16:42.615520 run iperf3-srv_10.42.42.10(pid=26046): Terminated {rc=256} 13:16:42.625817 --- ParallelTerminationStrategy: PID 26047 died... 13:16:42.681928 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26047): Terminated: ok {rc=0} 13:16:42.691852 --- ParallelTerminationStrategy: PID 26048 died... 13:16:42.747493 run iperf3-srv_10.42.42.10(pid=26048): Terminated {rc=256} 13:16:42.757411 --- ParallelTerminationStrategy: PID 26051 died... 13:16:42.813002 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26051): Terminated: ok {rc=0} 13:16:42.822970 --- ParallelTerminationStrategy: PID 26054 died... 13:16:42.878793 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26054): Terminated: ok {rc=0} 13:16:42.888725 --- ParallelTerminationStrategy: PID 26057 died... 13:16:42.944563 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26057): Terminated: ok {rc=0} 13:16:43.029692 bus /gobi_0: Setting Powered False 13:16:44.134655 bus /gobi_0: Setting Powered False 13:16:45.243256 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26055): Process ended prematurely: osmo-stp_10.42.42.5(pid=26055) [trial-2405↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26055)]