! osmo-bsc configuration example for custom SCCP addresses
!
log stderr
 logging color 1
 logging print category-hex 0
 logging print category 1
 logging timestamp 0
 logging print file basename last
 logging print level 1

e1_input
 e1_line 0 driver ipa
network
 network country code 1
 mobile network code 1
 encryption a5 0
 neci 1
 paging any use tch 0
 handover 0
 handover algorithm 1
 handover1 window rxlev averaging 10
 handover1 window rxqual averaging 1
 handover1 window rxlev neighbor averaging 10
 handover1 power budget interval 6
 handover1 power budget hysteresis 3
 handover1 maximum distance 9999
 ! T3212 is in units of 6min, so below we set 5 * 6 = 30min
 timer net T3212 5
 bts 0
  type osmo-bts
  band DCS1800
  cell_identity 0
  location_area_code 0x0001
  base_station_id_code 63
  ms max power 15
  cell reselection hysteresis 4
  rxlev access min 0
  radio-link-timeout 32
  channel allocator mode set-all ascending
  rach tx integer 9
  rach max transmission 7
  channel-description attach 1
  channel-description bs-pa-mfrms 5
  channel-description bs-ag-blks-res 1
  early-classmark-sending forbidden
  ipa unit-id 0 0
  oml ipa stream-id 255 line 0
  codec-support fr
  gprs mode none
  trx 0
   rf_locked 0
   arfcn 871
   nominal power 23
   ! to use full TRX power, set max_power_red 0
   max_power_red 20
   rsl e1 tei 0
   timeslot 0
    phys_chan_config CCCH+SDCCH4
    hopping enabled 0
   timeslot 1
    phys_chan_config TCH/F
    hopping enabled 0
   timeslot 2
    phys_chan_config TCH/F
    hopping enabled 0
   timeslot 3
    phys_chan_config TCH/F
    hopping enabled 0
   timeslot 4
    phys_chan_config TCH/F
    hopping enabled 0
   timeslot 5
    phys_chan_config TCH/F
    hopping enabled 0
   timeslot 6
    phys_chan_config TCH/F
    hopping enabled 0
   timeslot 7
    phys_chan_config TCH/F
    hopping enabled 0
cs7 instance 0
 point-code 0.42.1
 !asp asp-clnt-OsmoBSC 2905 0 m3ua
 ! remote-ip 10.23.24.1  ! where to reach the STP
 ! role asp
 ! sctp-role client
 sccp-address msc_remote
  point-code 0.23.1
msc 0
 msc-addr msc_remote