Failed
gprs:trx-lms-limenet-micro.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=23533): Process ended prematurely: osmo-stp_10.42.42.5(pid=23533) [trial-2350↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23533)]
Standard Output
---------------------------------------------- trial-2350 gprs:trx-lms-limenet-micro cs_paging_gprs_active.py ---------------------------------------------- 22:40:38.952942 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 22:40:38.964111 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 22:40:39.109253 tst cs_paging_gprs_active.py: using LAC 17242 22:40:39.235594 tst cs_paging_gprs_active.py: using RAC 157 22:40:39.364230 tst cs_paging_gprs_active.py: using CellId 17242 22:40:39.494984 tst cs_paging_gprs_active.py: using BVCI 17243 22:40:39.520069 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 22:40:39.531268 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 22:40:39.542351 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 22:40:39.553319 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 22:40:39.564195 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 22:40:39.575185 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 22:40:39.586367 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 22:40:39.597258 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 22:40:39.608686 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 22:40:39.726158 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 22:40:40.009709 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:40:40.138136 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:40:40.456665 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23523): Launched 22:40:40.721469 run iperf3-srv_10.42.42.10(pid=23524): Launched 22:40:40.909175 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:40:41.037267 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:40:41.355110 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23525): Launched 22:40:41.620629 run iperf3-srv_10.42.42.10(pid=23526): Launched 22:40:41.807778 tst cs_paging_gprs_active.py:38: start network... 22:40:41.959250 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:40:42.442862 run create_hlr_db(pid=23527): Launched 22:40:42.618710 bus /sierra_2: Setting Powered False 22:40:43.654508 run create_hlr_db(pid=23527): Terminated: ok {rc=0} 22:40:44.087899 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23529): Launched 22:40:44.414252 run osmo-hlr_10.42.42.2(pid=23530): Launched 22:40:44.533783 run osmo-stp_10.42.42.5: Starting osmo-stp 22:40:45.100532 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23532): Launched 22:40:45.429696 run osmo-stp_10.42.42.5(pid=23533): Launched 22:40:45.548720 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:40:46.141144 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23535): Launched 22:40:46.255294 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:40:46.553421 run patchelf(pid=23536): Launched 22:40:46.742775 run osmo-stp_10.42.42.5(pid=23533): ERR: Terminated: ERROR {rc=1} [trial-2350↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23533)] 22:40:46.881635 run osmo-stp_10.42.42.5(pid=23533): stdout: | (launched: 2022-12-08_22:40:45.267647) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:40:47.021640 run osmo-stp_10.42.42.5(pid=23533): stderr: | �[0;m�[38;5;43m20221208224045461 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208224045461 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208224045461 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208224045462 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208224045462 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208224045462 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208224045462 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:40:47.155660 run osmo-stp_10.42.42.5(pid=23533): stdout: | (launched: 2022-12-08_22:40:45.267647) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:40:47.284259 run osmo-stp_10.42.42.5(pid=23533): stderr: | �[0;m�[38;5;43m20221208224045461 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208224045461 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208224045461 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208224045462 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208224045462 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208224045462 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208224045462 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:40:47.432514 run patchelf(pid=23536): Terminating (SIGINT) 22:40:47.606813 run patchelf(pid=23536): Terminated: ok {rc=0} 22:40:47.638982 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=23533): Process ended prematurely: osmo-stp_10.42.42.5(pid=23533) [trial-2350↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23533)] [trial-2350↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38] 22:40:47.648522 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 22:40:47.711764 run osmo-hlr_10.42.42.2(pid=23530): ERR: Terminated: ERROR {rc=237} [trial-2350↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23530)] 22:40:47.762527 run osmo-hlr_10.42.42.2(pid=23530): stdout: | (launched: 2022-12-08_22:40:44.254558) 22:40:47.814052 run osmo-hlr_10.42.42.2(pid=23530): stderr: | �[0;m�[1;31m20221208224044454 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208224044454 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208224044454 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208224044454 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208224044454 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208224044454 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208224044467 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2350/run.2022-12-08_21-44-24/gprs:trx-lms-limenet-micro/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208224044477 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208224044477 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208224044477 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:40:47.858089 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23523): Terminating (SIGTERM) 22:40:47.899453 run iperf3-srv_10.42.42.10(pid=23524): Terminating (SIGTERM) 22:40:47.940920 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23525): Terminating (SIGTERM) 22:40:47.982444 run iperf3-srv_10.42.42.10(pid=23526): Terminating (SIGTERM) 22:40:48.024394 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23529): Terminating (SIGTERM) 22:40:48.065730 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23532): Terminating (SIGTERM) 22:40:48.107112 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23535): Terminating (SIGTERM) 22:40:48.116897 --- ParallelTerminationStrategy: PID 23523 died... 22:40:48.172724 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23523): Terminated: ok {rc=0} 22:40:48.182929 --- ParallelTerminationStrategy: PID 23524 died... 22:40:48.238444 run iperf3-srv_10.42.42.10(pid=23524): Terminated {rc=256} 22:40:48.248636 --- ParallelTerminationStrategy: PID 23525 died... 22:40:48.303693 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23525): Terminated: ok {rc=0} 22:40:48.314056 --- ParallelTerminationStrategy: PID 23526 died... 22:40:48.369235 run iperf3-srv_10.42.42.10(pid=23526): Terminated {rc=256} 22:40:48.379493 --- ParallelTerminationStrategy: PID 23529 died... 22:40:48.434463 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23529): Terminated: ok {rc=0} 22:40:48.445090 --- ParallelTerminationStrategy: PID 23532 died... 22:40:48.500105 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23532): Terminated: ok {rc=0} 22:40:48.510693 --- ParallelTerminationStrategy: PID 23535 died... 22:40:48.566243 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23535): Terminated: ok {rc=0} 22:40:48.655404 bus /gobi_0: Setting Powered False 22:40:49.760520 bus /gobi_0: Setting Powered False 22:40:50.869264 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=23533): Process ended prematurely: osmo-stp_10.42.42.5(pid=23533) [trial-2350↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23533)]