Failed
gprs:trx-sysmocell5000+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=20245): Process ended prematurely: osmo-stp_10.42.42.5(pid=20245) [trial-2350↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20245)]
Standard Output
---------------------------------------------- trial-2350 gprs:trx-sysmocell5000+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 22:16:35.275008 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:16:35.285820 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x bts (candidates: 1) 22:16:35.427426 tst cs_paging_gprs_active.py: using LAC 17114 22:16:35.550293 tst cs_paging_gprs_active.py: using RAC 29 22:16:35.673623 tst cs_paging_gprs_active.py: using CellId 17114 22:16:35.793504 tst cs_paging_gprs_active.py: using BVCI 17115 22:16:35.816695 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:16:35.827716 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:16:35.838589 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:16:35.849966 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:16:35.861355 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:16:35.872625 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:16:35.884155 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:16:35.895478 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:16:35.907277 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 22:16:36.029197 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 22:16:36.310701 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:16:36.437948 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:16:36.751833 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20235): Launched 22:16:37.014115 run iperf3-srv_10.42.42.10(pid=20236): Launched 22:16:37.199705 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:16:37.326463 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:16:37.639755 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20237): Launched 22:16:37.901613 run iperf3-srv_10.42.42.10(pid=20238): Launched 22:16:38.086723 tst cs_paging_gprs_active.py:38: start network... 22:16:38.213658 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:16:38.692822 run create_hlr_db(pid=20239): Launched 22:16:38.867532 bus /gobi_6: Setting Powered False 22:16:39.890902 run create_hlr_db(pid=20239): Terminated: ok {rc=0} 22:16:40.295776 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20241): Launched 22:16:40.600179 run osmo-hlr_10.42.42.2(pid=20242): Launched 22:16:40.724087 run osmo-stp_10.42.42.5: Starting osmo-stp 22:16:41.255193 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20244): Launched 22:16:41.558474 run osmo-stp_10.42.42.5(pid=20245): Launched 22:16:41.676337 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:16:42.210673 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20247): Launched 22:16:42.319195 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:16:42.583487 run patchelf(pid=20248): Launched 22:16:42.762535 run osmo-stp_10.42.42.5(pid=20245): ERR: Terminated: ERROR {rc=1} [trial-2350↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20245)] 22:16:42.893535 run osmo-stp_10.42.42.5(pid=20245): stdout: | (launched: 2022-12-08_22:16:41.409863) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:16:43.024695 run osmo-stp_10.42.42.5(pid=20245): stderr: | �[0;m�[38;5;43m20221208221641580 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208221641580 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208221641580 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208221641581 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208221641581 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208221641581 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208221641581 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:16:43.152226 run osmo-stp_10.42.42.5(pid=20245): stdout: | (launched: 2022-12-08_22:16:41.409863) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:16:43.278662 run osmo-stp_10.42.42.5(pid=20245): stderr: | �[0;m�[38;5;43m20221208221641580 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208221641580 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208221641580 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208221641581 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208221641581 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208221641581 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208221641581 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:16:43.424260 run patchelf(pid=20248): Terminating (SIGINT) 22:16:43.595708 run patchelf(pid=20248): Terminated: ok {rc=0} 22:16:43.627125 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=20245): Process ended prematurely: osmo-stp_10.42.42.5(pid=20245) [trial-2350↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20245)] [trial-2350↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 22:16:43.636318 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 22:16:43.697852 run osmo-hlr_10.42.42.2(pid=20242): ERR: Terminated: ERROR {rc=237} [trial-2350↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20242)] 22:16:43.747902 run osmo-hlr_10.42.42.2(pid=20242): stdout: | (launched: 2022-12-08_22:16:40.451588) 22:16:43.798642 run osmo-hlr_10.42.42.2(pid=20242): stderr: | �[0;m�[1;31m20221208221640627 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208221640627 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208221640627 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208221640627 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208221640627 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208221640627 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208221640639 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2350/run.2022-12-08_21-44-24/gprs:trx-sysmocell5000+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208221640649 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208221640650 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208221640650 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:16:43.841776 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20235): Terminating (SIGTERM) 22:16:43.882591 run iperf3-srv_10.42.42.10(pid=20236): Terminating (SIGTERM) 22:16:43.923736 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20237): Terminating (SIGTERM) 22:16:43.964460 run iperf3-srv_10.42.42.10(pid=20238): Terminating (SIGTERM) 22:16:44.005312 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20241): Terminating (SIGTERM) 22:16:44.046010 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20244): Terminating (SIGTERM) 22:16:44.086869 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20247): Terminating (SIGTERM) 22:16:44.096330 --- ParallelTerminationStrategy: PID 20235 died... 22:16:44.151157 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20235): Terminated: ok {rc=0} 22:16:44.161004 --- ParallelTerminationStrategy: PID 20236 died... 22:16:44.215445 run iperf3-srv_10.42.42.10(pid=20236): Terminated {rc=256} 22:16:44.225237 --- ParallelTerminationStrategy: PID 20237 died... 22:16:44.279454 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20237): Terminated: ok {rc=0} 22:16:44.289334 --- ParallelTerminationStrategy: PID 20238 died... 22:16:44.343335 run iperf3-srv_10.42.42.10(pid=20238): Terminated {rc=256} 22:16:44.353370 --- ParallelTerminationStrategy: PID 20241 died... 22:16:44.407241 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20241): Terminated: ok {rc=0} 22:16:44.417267 --- ParallelTerminationStrategy: PID 20244 died... 22:16:44.471286 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20244): Terminated: ok {rc=0} 22:16:44.481367 --- ParallelTerminationStrategy: PID 20247 died... 22:16:44.535965 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20247): Terminated: ok {rc=0} 22:16:44.625282 bus /gobi_0: Setting Powered False 22:16:45.729272 bus /gobi_0: Setting Powered False 22:16:46.865115 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20245): Process ended prematurely: osmo-stp_10.42.42.5(pid=20245) [trial-2350↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20245)]