Failed
gprs:trx-b200+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=12329): Process ended prematurely: osmo-stp_10.42.42.5(pid=12329) [trial-2353↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12329)]
Standard Output
---------------------------------------------- trial-2353 gprs:trx-b200+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 02:33:23.049620 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:33:23.061076 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 02:33:23.227649 tst cs_paging_gprs_active.py: using LAC 18460 02:33:23.353792 tst cs_paging_gprs_active.py: using RAC 100 02:33:23.480251 tst cs_paging_gprs_active.py: using CellId 18460 02:33:23.610681 tst cs_paging_gprs_active.py: using BVCI 18461 02:33:23.635222 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:33:23.646594 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:33:23.657820 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:33:23.669407 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:33:23.680780 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:33:23.692800 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:33:23.704607 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:33:23.716553 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:33:23.728134 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 02:33:23.845381 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 02:33:24.123503 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:33:24.249346 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:33:24.559198 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12319): Launched 02:33:24.815867 run iperf3-srv_10.42.42.10(pid=12320): Launched 02:33:24.998992 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:33:25.123029 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:33:25.431001 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12321): Launched 02:33:25.687362 run iperf3-srv_10.42.42.10(pid=12322): Launched 02:33:25.869661 tst cs_paging_gprs_active.py:38: start network... 02:33:25.994034 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:33:26.472751 run create_hlr_db(pid=12323): Launched 02:33:26.644088 bus /gobi_6: Setting Powered False 02:33:27.666084 run create_hlr_db(pid=12323): Terminated: ok {rc=0} 02:33:28.090664 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12325): Launched 02:33:28.412438 run osmo-hlr_10.42.42.2(pid=12326): Launched 02:33:28.530472 run osmo-stp_10.42.42.5: Starting osmo-stp 02:33:29.083635 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12328): Launched 02:33:29.406489 run osmo-stp_10.42.42.5(pid=12329): Launched 02:33:29.524609 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:33:30.084228 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12331): Launched 02:33:30.199720 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:33:30.479126 run patchelf(pid=12332): Launched 02:33:30.667200 run osmo-stp_10.42.42.5(pid=12329): ERR: Terminated: ERROR {rc=1} [trial-2353↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12329)] 02:33:30.804510 run osmo-stp_10.42.42.5(pid=12329): stdout: | (launched: 2022-12-09_02:33:29.246678) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:33:30.940773 run osmo-stp_10.42.42.5(pid=12329): stderr: | �[0;m�[38;5;43m20221209023329439 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209023329439 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209023329439 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209023329440 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209023329440 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209023329440 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209023329440 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:33:31.069870 run osmo-stp_10.42.42.5(pid=12329): stdout: | (launched: 2022-12-09_02:33:29.246678) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:33:31.196780 run osmo-stp_10.42.42.5(pid=12329): stderr: | �[0;m�[38;5;43m20221209023329439 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209023329439 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209023329439 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209023329440 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209023329440 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209023329440 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209023329440 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:33:31.345384 run patchelf(pid=12332): Terminating (SIGINT) 02:33:31.518288 run patchelf(pid=12332): Terminated: ok {rc=0} 02:33:31.550965 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=12329): Process ended prematurely: osmo-stp_10.42.42.5(pid=12329) [trial-2353↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12329)] [trial-2353↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 02:33:31.562025 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 02:33:31.623194 run osmo-hlr_10.42.42.2(pid=12326): ERR: Terminated: ERROR {rc=237} [trial-2353↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12326)] 02:33:31.673702 run osmo-hlr_10.42.42.2(pid=12326): stdout: | (launched: 2022-12-09_02:33:28.254767) 02:33:31.724057 run osmo-hlr_10.42.42.2(pid=12326): stderr: | �[0;m�[1;31m20221209023328452 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209023328452 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209023328452 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209023328452 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209023328452 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209023328452 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209023328463 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2353/run.2022-12-09_02-07-59/gprs:trx-b200+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209023328472 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209023328472 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209023328472 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:33:31.768028 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12319): Terminating (SIGTERM) 02:33:31.809399 run iperf3-srv_10.42.42.10(pid=12320): Terminating (SIGTERM) 02:33:31.849983 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12321): Terminating (SIGTERM) 02:33:31.891649 run iperf3-srv_10.42.42.10(pid=12322): Terminating (SIGTERM) 02:33:31.932847 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12325): Terminating (SIGTERM) 02:33:31.977382 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12328): Terminating (SIGTERM) 02:33:32.018964 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12331): Terminating (SIGTERM) 02:33:32.028780 --- ParallelTerminationStrategy: PID 12319 died... 02:33:32.086044 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12319): Terminated: ok {rc=0} 02:33:32.096039 --- ParallelTerminationStrategy: PID 12320 died... 02:33:32.150304 run iperf3-srv_10.42.42.10(pid=12320): Terminated {rc=256} 02:33:32.161216 --- ParallelTerminationStrategy: PID 12321 died... 02:33:32.215443 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12321): Terminated: ok {rc=0} 02:33:32.225211 --- ParallelTerminationStrategy: PID 12322 died... 02:33:32.278951 run iperf3-srv_10.42.42.10(pid=12322): Terminated {rc=256} 02:33:32.288728 --- ParallelTerminationStrategy: PID 12325 died... 02:33:32.341861 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12325): Terminated: ok {rc=0} 02:33:32.351224 --- ParallelTerminationStrategy: PID 12328 died... 02:33:32.404606 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12328): Terminated: ok {rc=0} 02:33:32.414017 --- ParallelTerminationStrategy: PID 12331 died... 02:33:32.466186 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12331): Terminated: ok {rc=0} 02:33:32.553917 bus /gobi_0: Setting Powered False 02:33:33.658213 bus /gobi_0: Setting Powered False 02:33:34.764600 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12329): Process ended prematurely: osmo-stp_10.42.42.5(pid=12329) [trial-2353↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12329)]