Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-ipa.ping_idle_ping.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=13737): Process ended prematurely: osmo-stp_10.42.42.5(pid=13737) [trial-2353↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13737)]
Standard Output
---------------------------------------------- trial-2353 gprs:trx-sysmocell5000+mod-bts0-dynts-ipa ping_idle_ping.py ---------------------------------------------- 02:42:06.468212 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:42:06.481100 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 02:42:06.647458 tst ping_idle_ping.py: using LAC 18506 02:42:06.773373 tst ping_idle_ping.py: using RAC 146 02:42:06.898422 tst ping_idle_ping.py: using CellId 18506 02:42:07.014123 tst ping_idle_ping.py: using BVCI 18507 02:42:07.037332 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:42:07.049260 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:42:07.060399 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:42:07.072190 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:42:07.084222 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:42:07.096156 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:42:07.108350 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:42:07.119918 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 02:42:07.411470 tst ping_idle_ping.py:24: start network... 02:42:07.544398 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:42:08.061937 run create_hlr_db(pid=13731): Launched 02:42:08.246915 bus /gobi_6: Setting Powered False 02:42:09.267610 run create_hlr_db(pid=13731): Terminated: ok {rc=0} 02:42:09.667632 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13733): Launched 02:42:09.964363 run osmo-hlr_10.42.42.2(pid=13734): Launched 02:42:10.075457 run osmo-stp_10.42.42.5: Starting osmo-stp 02:42:10.589975 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13736): Launched 02:42:10.885014 run osmo-stp_10.42.42.5(pid=13737): Launched 02:42:10.993427 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:42:11.508839 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13739): Launched 02:42:11.614654 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:42:11.872920 run patchelf(pid=13740): Launched 02:42:12.047341 run osmo-stp_10.42.42.5(pid=13737): ERR: Terminated: ERROR {rc=1} [trial-2353↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13737)] 02:42:12.174371 run osmo-stp_10.42.42.5(pid=13737): stdout: | (launched: 2022-12-09_02:42:10.739750) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:42:12.302049 run osmo-stp_10.42.42.5(pid=13737): stderr: | �[0;m�[38;5;43m20221209024210909 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209024210909 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209024210909 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209024210910 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209024210910 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209024210910 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209024210910 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:42:12.425546 run osmo-stp_10.42.42.5(pid=13737): stdout: | (launched: 2022-12-09_02:42:10.739750) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:42:12.547796 run osmo-stp_10.42.42.5(pid=13737): stderr: | �[0;m�[38;5;43m20221209024210909 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209024210909 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209024210909 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209024210910 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209024210910 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209024210910 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209024210910 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:42:12.689618 run patchelf(pid=13740): Terminating (SIGINT) 02:42:12.855606 run patchelf(pid=13740): Terminated: ok {rc=0} 02:42:12.885780 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=13737): Process ended prematurely: osmo-stp_10.42.42.5(pid=13737) [trial-2353↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13737)] [trial-2353↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping_idle_ping.py:27] 02:42:12.894482 tst ping_idle_ping.py:27: Test FAILED (6.4 sec) 02:42:12.954169 run osmo-hlr_10.42.42.2(pid=13734): ERR: Terminated: ERROR {rc=237} [trial-2353↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13734)] 02:42:13.002833 run osmo-hlr_10.42.42.2(pid=13734): stdout: | (launched: 2022-12-09_02:42:09.818770) 02:42:13.051992 run osmo-hlr_10.42.42.2(pid=13734): stderr: | �[0;m�[1;31m20221209024209995 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209024209995 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209024209995 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209024209995 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209024209995 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209024209995 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209024210007 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2353/run.2022-12-09_02-07-59/gprs:trx-sysmocell5000+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209024210017 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209024210017 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209024210017 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:42:13.094228 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13733): Terminating (SIGTERM) 02:42:13.134242 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13736): Terminating (SIGTERM) 02:42:13.174026 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13739): Terminating (SIGTERM) 02:42:13.183402 --- ParallelTerminationStrategy: PID 13733 died... 02:42:13.236297 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13733): Terminated: ok {rc=0} 02:42:13.246067 --- ParallelTerminationStrategy: PID 13736 died... 02:42:13.298918 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13736): Terminated: ok {rc=0} 02:42:13.308367 --- ParallelTerminationStrategy: PID 13739 died... 02:42:13.361049 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13739): Terminated: ok {rc=0} 02:42:13.443826 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13737): Process ended prematurely: osmo-stp_10.42.42.5(pid=13737) [trial-2353↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13737)]