Failed
gprs:trx-sysmocell5000+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=13439): Process ended prematurely: osmo-stp_10.42.42.5(pid=13439) [trial-2353↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13439)]
Standard Output
---------------------------------------------- trial-2353 gprs:trx-sysmocell5000+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 02:40:15.352280 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:40:15.363741 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x bts (candidates: 1) 02:40:15.513564 tst cs_paging_gprs_active.py: using LAC 18497 02:40:15.638189 tst cs_paging_gprs_active.py: using RAC 137 02:40:15.763537 tst cs_paging_gprs_active.py: using CellId 18497 02:40:15.923205 tst cs_paging_gprs_active.py: using BVCI 18498 02:40:15.948810 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:40:15.960887 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:40:15.972875 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:40:15.984653 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:40:15.996328 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:40:16.008118 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:40:16.021679 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:40:16.035564 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:40:16.047611 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 02:40:16.171318 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 02:40:16.471631 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:40:16.611343 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:40:16.964028 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13429): Launched 02:40:17.246986 run iperf3-srv_10.42.42.10(pid=13430): Launched 02:40:17.446989 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:40:17.583645 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:40:17.919142 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13431): Launched 02:40:18.196875 run iperf3-srv_10.42.42.10(pid=13432): Launched 02:40:18.396207 tst cs_paging_gprs_active.py:38: start network... 02:40:18.531727 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:40:19.050497 run create_hlr_db(pid=13433): Launched 02:40:19.237721 bus /gobi_6: Setting Powered False 02:40:20.259051 run create_hlr_db(pid=13433): Terminated: ok {rc=0} 02:40:20.691192 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13435): Launched 02:40:21.015795 run osmo-hlr_10.42.42.2(pid=13436): Launched 02:40:21.137810 run osmo-stp_10.42.42.5: Starting osmo-stp 02:40:21.702030 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13438): Launched 02:40:22.025033 run osmo-stp_10.42.42.5(pid=13439): Launched 02:40:22.142440 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:40:22.707770 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13441): Launched 02:40:22.823731 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:40:23.111086 run patchelf(pid=13442): Launched 02:40:23.301076 run osmo-stp_10.42.42.5(pid=13439): ERR: Terminated: ERROR {rc=1} [trial-2353↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13439)] 02:40:23.442560 run osmo-stp_10.42.42.5(pid=13439): stdout: | (launched: 2022-12-09_02:40:21.866902) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:40:23.584166 run osmo-stp_10.42.42.5(pid=13439): stderr: | �[0;m�[38;5;43m20221209024022059 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209024022060 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209024022060 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209024022060 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209024022061 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209024022061 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209024022061 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:40:23.721122 run osmo-stp_10.42.42.5(pid=13439): stdout: | (launched: 2022-12-09_02:40:21.866902) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:40:23.858149 run osmo-stp_10.42.42.5(pid=13439): stderr: | �[0;m�[38;5;43m20221209024022059 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209024022060 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209024022060 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209024022060 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209024022061 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209024022061 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209024022061 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:40:24.015804 run patchelf(pid=13442): Terminating (SIGINT) 02:40:24.200368 run patchelf(pid=13442): Terminated: ok {rc=0} 02:40:24.234915 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=13439): Process ended prematurely: osmo-stp_10.42.42.5(pid=13439) [trial-2353↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13439)] [trial-2353↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 02:40:24.245740 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 02:40:24.313079 run osmo-hlr_10.42.42.2(pid=13436): ERR: Terminated: ERROR {rc=237} [trial-2353↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13436)] 02:40:24.366660 run osmo-hlr_10.42.42.2(pid=13436): stdout: | (launched: 2022-12-09_02:40:20.856827) 02:40:24.418341 run osmo-hlr_10.42.42.2(pid=13436): stderr: | �[0;m�[1;31m20221209024021057 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209024021057 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209024021057 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209024021057 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209024021057 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209024021057 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209024021070 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2353/run.2022-12-09_02-07-59/gprs:trx-sysmocell5000+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209024021078 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209024021078 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209024021078 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:40:24.462914 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13429): Terminating (SIGTERM) 02:40:24.507526 run iperf3-srv_10.42.42.10(pid=13430): Terminating (SIGTERM) 02:40:24.550397 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13431): Terminating (SIGTERM) 02:40:24.592654 run iperf3-srv_10.42.42.10(pid=13432): Terminating (SIGTERM) 02:40:24.635094 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13435): Terminating (SIGTERM) 02:40:24.677395 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13438): Terminating (SIGTERM) 02:40:24.720488 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13441): Terminating (SIGTERM) 02:40:24.730579 --- ParallelTerminationStrategy: PID 13429 died... 02:40:24.788071 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13429): Terminated: ok {rc=0} 02:40:24.798894 --- ParallelTerminationStrategy: PID 13430 died... 02:40:24.855616 run iperf3-srv_10.42.42.10(pid=13430): Terminated {rc=256} 02:40:24.866489 --- ParallelTerminationStrategy: PID 13431 died... 02:40:24.923655 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13431): Terminated: ok {rc=0} 02:40:24.934412 --- ParallelTerminationStrategy: PID 13432 died... 02:40:24.991084 run iperf3-srv_10.42.42.10(pid=13432): Terminated {rc=256} 02:40:25.001856 --- ParallelTerminationStrategy: PID 13435 died... 02:40:25.059702 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13435): Terminated: ok {rc=0} 02:40:25.070518 --- ParallelTerminationStrategy: PID 13438 died... 02:40:25.127704 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13438): Terminated: ok {rc=0} 02:40:25.138509 --- ParallelTerminationStrategy: PID 13441 died... 02:40:25.196015 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13441): Terminated: ok {rc=0} 02:40:25.286332 bus /gobi_0: Setting Powered False 02:40:26.396016 bus /gobi_0: Setting Powered False 02:40:27.510132 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13439): Process ended prematurely: osmo-stp_10.42.42.5(pid=13439) [trial-2353↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13439)]