Failed
gprs:trx-umtrx+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=14863): Process ended prematurely: osmo-stp_10.42.42.5(pid=14863) [trial-2353↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14863)]
Standard Output
---------------------------------------------- trial-2353 gprs:trx-umtrx+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 02:50:29.842737 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:50:29.853633 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 02:50:30.006663 tst cs_paging_gprs_active.py: using LAC 18551 02:50:30.123550 tst cs_paging_gprs_active.py: using RAC 191 02:50:30.239374 tst cs_paging_gprs_active.py: using CellId 18551 02:50:30.354739 tst cs_paging_gprs_active.py: using BVCI 18552 02:50:30.377393 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:50:30.388167 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:50:30.398946 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:50:30.410328 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:50:30.421787 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:50:30.432990 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:50:30.444311 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:50:30.455643 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:50:30.467101 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 02:50:30.587302 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 02:50:30.876489 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:50:31.010085 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:50:31.400284 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14853): Launched 02:50:31.729053 run iperf3-srv_10.42.42.10(pid=14854): Launched 02:50:31.942742 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:50:32.070169 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:50:32.397780 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14855): Launched 02:50:32.654091 run iperf3-srv_10.42.42.10(pid=14856): Launched 02:50:32.835661 tst cs_paging_gprs_active.py:38: start network... 02:50:32.959607 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:50:33.426079 run create_hlr_db(pid=14857): Launched 02:50:33.596435 bus /gobi_6: Setting Powered False 02:50:34.618083 run create_hlr_db(pid=14857): Terminated: ok {rc=0} 02:50:35.033671 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14859): Launched 02:50:35.331010 run osmo-hlr_10.42.42.2(pid=14860): Launched 02:50:35.446765 run osmo-stp_10.42.42.5: Starting osmo-stp 02:50:35.970048 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14862): Launched 02:50:36.266478 run osmo-stp_10.42.42.5(pid=14863): Launched 02:50:36.375034 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:50:36.891043 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14865): Launched 02:50:36.997568 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:50:37.257058 run patchelf(pid=14866): Launched 02:50:37.430235 run osmo-stp_10.42.42.5(pid=14863): ERR: Terminated: ERROR {rc=1} [trial-2353↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14863)] 02:50:37.557266 run osmo-stp_10.42.42.5(pid=14863): stdout: | (launched: 2022-12-09_02:50:36.120683) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:50:37.684435 run osmo-stp_10.42.42.5(pid=14863): stderr: | �[0;m�[38;5;43m20221209025036287 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209025036288 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209025036288 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209025036288 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209025036289 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209025036289 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209025036289 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:50:37.807788 run osmo-stp_10.42.42.5(pid=14863): stdout: | (launched: 2022-12-09_02:50:36.120683) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:50:37.930177 run osmo-stp_10.42.42.5(pid=14863): stderr: | �[0;m�[38;5;43m20221209025036287 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209025036288 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209025036288 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209025036288 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209025036289 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209025036289 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209025036289 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:50:38.072826 run patchelf(pid=14866): Terminating (SIGINT) 02:50:38.240053 run patchelf(pid=14866): Terminated: ok {rc=0} 02:50:38.271093 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=14863): Process ended prematurely: osmo-stp_10.42.42.5(pid=14863) [trial-2353↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14863)] [trial-2353↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 02:50:38.280330 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 02:50:38.341198 run osmo-hlr_10.42.42.2(pid=14860): ERR: Terminated: ERROR {rc=237} [trial-2353↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14860)] 02:50:38.389993 run osmo-hlr_10.42.42.2(pid=14860): stdout: | (launched: 2022-12-09_02:50:35.184740) 02:50:38.438764 run osmo-hlr_10.42.42.2(pid=14860): stderr: | �[0;m�[1;31m20221209025035360 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209025035360 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209025035360 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209025035360 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209025035360 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209025035360 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209025035373 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2353/run.2022-12-09_02-07-59/gprs:trx-umtrx+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209025035381 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209025035381 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209025035381 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:50:38.481037 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14853): Terminating (SIGTERM) 02:50:38.520807 run iperf3-srv_10.42.42.10(pid=14854): Terminating (SIGTERM) 02:50:38.560538 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14855): Terminating (SIGTERM) 02:50:38.600144 run iperf3-srv_10.42.42.10(pid=14856): Terminating (SIGTERM) 02:50:38.639720 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14859): Terminating (SIGTERM) 02:50:38.679328 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14862): Terminating (SIGTERM) 02:50:38.719377 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14865): Terminating (SIGTERM) 02:50:38.728663 --- ParallelTerminationStrategy: PID 14853 died... 02:50:38.781867 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14853): Terminated: ok {rc=0} 02:50:38.791719 --- ParallelTerminationStrategy: PID 14854 died... 02:50:38.844911 run iperf3-srv_10.42.42.10(pid=14854): Terminated {rc=256} 02:50:38.854581 --- ParallelTerminationStrategy: PID 14855 died... 02:50:38.907298 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14855): Terminated: ok {rc=0} 02:50:38.917043 --- ParallelTerminationStrategy: PID 14856 died... 02:50:38.969416 run iperf3-srv_10.42.42.10(pid=14856): Terminated {rc=256} 02:50:38.979113 --- ParallelTerminationStrategy: PID 14859 died... 02:50:39.032038 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14859): Terminated: ok {rc=0} 02:50:39.041699 --- ParallelTerminationStrategy: PID 14862 died... 02:50:39.094650 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14862): Terminated: ok {rc=0} 02:50:39.104262 --- ParallelTerminationStrategy: PID 14865 died... 02:50:39.157113 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14865): Terminated: ok {rc=0} 02:50:39.244519 bus /gobi_0: Setting Powered False 02:50:40.346966 bus /gobi_0: Setting Powered False 02:50:41.457374 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14863): Process ended prematurely: osmo-stp_10.42.42.5(pid=14863) [trial-2353↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14863)]