Failed
gprs:trx-b200.cs_paging_gprs_active.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=21257): Process ended prematurely: osmo-stp_10.42.42.5(pid=21257) [trial-2354↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21257)]
Standard Output
---------------------------------------------- trial-2354 gprs:trx-b200 cs_paging_gprs_active.py ---------------------------------------------- 03:57:27.197746 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 03:57:27.209058 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 03:57:27.352283 tst cs_paging_gprs_active.py: using LAC 18906 03:57:27.480588 tst cs_paging_gprs_active.py: using RAC 36 03:57:27.609711 tst cs_paging_gprs_active.py: using CellId 18906 03:57:27.736517 tst cs_paging_gprs_active.py: using BVCI 18907 03:57:27.761511 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 03:57:27.772470 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 03:57:27.783339 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 03:57:27.794385 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 03:57:27.805854 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 03:57:27.816725 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 03:57:27.827969 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 03:57:27.839185 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 03:57:27.850470 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 03:57:27.969903 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 03:57:28.264877 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 03:57:28.401355 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:57:28.737394 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21247): Launched 03:57:29.018654 run iperf3-srv_10.42.42.10(pid=21248): Launched 03:57:29.218469 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 03:57:29.354516 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:57:29.690148 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21249): Launched 03:57:29.970096 run iperf3-srv_10.42.42.10(pid=21250): Launched 03:57:30.169863 tst cs_paging_gprs_active.py:38: start network... 03:57:30.306149 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:57:30.819516 run create_hlr_db(pid=21251): Launched 03:57:31.020289 bus /sierra_2: Setting Powered False 03:57:32.034851 run create_hlr_db(pid=21251): Terminated: ok {rc=0} 03:57:32.442697 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21253): Launched 03:57:32.748463 run osmo-hlr_10.42.42.2(pid=21254): Launched 03:57:32.861286 run osmo-stp_10.42.42.5: Starting osmo-stp 03:57:33.387474 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21256): Launched 03:57:33.690210 run osmo-stp_10.42.42.5(pid=21257): Launched 03:57:33.799209 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:57:34.331410 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21259): Launched 03:57:34.440291 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:57:34.705529 run patchelf(pid=21260): Launched 03:57:34.882956 run osmo-stp_10.42.42.5(pid=21257): ERR: Terminated: ERROR {rc=1} [trial-2354↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21257)] 03:57:35.013205 run osmo-stp_10.42.42.5(pid=21257): stdout: | (launched: 2022-12-09_03:57:33.541439) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:57:35.143026 run osmo-stp_10.42.42.5(pid=21257): stderr: | �[0;m�[38;5;43m20221209035733714 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209035733714 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209035733714 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209035733715 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209035733715 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209035733715 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209035733715 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:57:35.269652 run osmo-stp_10.42.42.5(pid=21257): stdout: | (launched: 2022-12-09_03:57:33.541439) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:57:35.394209 run osmo-stp_10.42.42.5(pid=21257): stderr: | �[0;m�[38;5;43m20221209035733714 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209035733714 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209035733714 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209035733715 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209035733715 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209035733715 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209035733715 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:57:35.539925 run patchelf(pid=21260): Terminating (SIGINT) 03:57:35.711392 run patchelf(pid=21260): Terminated: ok {rc=0} 03:57:35.743043 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=21257): Process ended prematurely: osmo-stp_10.42.42.5(pid=21257) [trial-2354↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21257)] [trial-2354↪gprs:trx-b200↪cs_paging_gprs_active.py:38] 03:57:35.752299 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 03:57:35.813228 run osmo-hlr_10.42.42.2(pid=21254): ERR: Terminated: ERROR {rc=237} [trial-2354↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21254)] 03:57:35.863199 run osmo-hlr_10.42.42.2(pid=21254): stdout: | (launched: 2022-12-09_03:57:32.596429) 03:57:35.913464 run osmo-hlr_10.42.42.2(pid=21254): stderr: | �[0;m�[1;31m20221209035732773 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209035732773 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209035732773 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209035732773 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209035732773 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209035732773 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209035732785 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2354/run.2022-12-09_03-35-04/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209035732793 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209035732794 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209035732794 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:57:35.955957 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21247): Terminating (SIGTERM) 03:57:35.995954 run iperf3-srv_10.42.42.10(pid=21248): Terminating (SIGTERM) 03:57:36.036150 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21249): Terminating (SIGTERM) 03:57:36.076192 run iperf3-srv_10.42.42.10(pid=21250): Terminating (SIGTERM) 03:57:36.116335 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21253): Terminating (SIGTERM) 03:57:36.156491 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21256): Terminating (SIGTERM) 03:57:36.196738 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21259): Terminating (SIGTERM) 03:57:36.206427 --- ParallelTerminationStrategy: PID 21247 died... 03:57:36.260281 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21247): Terminated: ok {rc=0} 03:57:36.269927 --- ParallelTerminationStrategy: PID 21248 died... 03:57:36.322942 run iperf3-srv_10.42.42.10(pid=21248): Terminated {rc=256} 03:57:36.332435 --- ParallelTerminationStrategy: PID 21249 died... 03:57:36.385588 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21249): Terminated: ok {rc=0} 03:57:36.395100 --- ParallelTerminationStrategy: PID 21250 died... 03:57:36.448300 run iperf3-srv_10.42.42.10(pid=21250): Terminated {rc=256} 03:57:36.457876 --- ParallelTerminationStrategy: PID 21253 died... 03:57:36.511256 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21253): Terminated: ok {rc=0} 03:57:36.520748 --- ParallelTerminationStrategy: PID 21256 died... 03:57:36.574077 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21256): Terminated: ok {rc=0} 03:57:36.583639 --- ParallelTerminationStrategy: PID 21259 died... 03:57:36.636828 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21259): Terminated: ok {rc=0} 03:57:36.719841 bus /gobi_0: Setting Powered False 03:57:37.828536 bus /gobi_0: Setting Powered False 03:57:38.937586 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21257): Process ended prematurely: osmo-stp_10.42.42.5(pid=21257) [trial-2354↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21257)]