Failed
gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=31751): Process ended prematurely: osmo-stp_10.42.42.5(pid=31751) [trial-2355↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31751)]
Standard Output
---------------------------------------------- trial-2355 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 05:54:36.331460 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 05:54:36.343553 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 05:54:36.493438 tst cs_paging_gprs_active.py: using LAC 19387 05:54:36.625587 tst cs_paging_gprs_active.py: using RAC 7 05:54:36.758089 tst cs_paging_gprs_active.py: using CellId 19387 05:54:36.889449 tst cs_paging_gprs_active.py: using BVCI 19388 05:54:36.915229 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 05:54:36.927302 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 05:54:36.939114 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 05:54:36.951234 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 05:54:36.963233 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 05:54:36.975566 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 05:54:36.987791 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 05:54:36.999689 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 05:54:37.011912 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 05:54:37.131789 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 05:54:37.416408 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 05:54:37.546349 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:54:37.867462 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31741): Launched 05:54:38.135504 run iperf3-srv_10.42.42.10(pid=31742): Launched 05:54:38.324038 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 05:54:38.453252 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:54:38.773582 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31743): Launched 05:54:39.042709 run iperf3-srv_10.42.42.10(pid=31744): Launched 05:54:39.231061 tst cs_paging_gprs_active.py:38: start network... 05:54:39.359829 run osmo-hlr_10.42.42.2: Starting osmo-hlr 05:54:39.847945 run create_hlr_db(pid=31745): Launched 05:54:40.026546 bus /gobi_6: Setting Powered False 05:54:41.047797 run create_hlr_db(pid=31745): Terminated: ok {rc=0} 05:54:41.487673 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31747): Launched 05:54:41.820242 run osmo-hlr_10.42.42.2(pid=31748): Launched 05:54:41.946095 run osmo-stp_10.42.42.5: Starting osmo-stp 05:54:42.522040 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31750): Launched 05:54:42.854075 run osmo-stp_10.42.42.5(pid=31751): Launched 05:54:42.973770 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 05:54:43.553053 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31753): Launched 05:54:43.671689 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 05:54:43.961173 run patchelf(pid=31754): Launched 05:54:44.155925 run osmo-stp_10.42.42.5(pid=31751): ERR: Terminated: ERROR {rc=1} [trial-2355↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31751)] 05:54:44.297607 run osmo-stp_10.42.42.5(pid=31751): stdout: | (launched: 2022-12-09_05:54:42.690746) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:54:44.439777 run osmo-stp_10.42.42.5(pid=31751): stderr: | �[0;m�[38;5;43m20221209055442884 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209055442884 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209055442884 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209055442885 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209055442887 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209055442887 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209055442887 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:54:44.577200 run osmo-stp_10.42.42.5(pid=31751): stdout: | (launched: 2022-12-09_05:54:42.690746) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:54:44.713791 run osmo-stp_10.42.42.5(pid=31751): stderr: | �[0;m�[38;5;43m20221209055442884 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209055442884 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209055442884 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209055442885 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209055442887 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209055442887 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209055442887 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:54:44.872366 run patchelf(pid=31754): Terminating (SIGINT) 05:54:45.058032 run patchelf(pid=31754): Terminated: ok {rc=0} 05:54:45.091989 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=31751): Process ended prematurely: osmo-stp_10.42.42.5(pid=31751) [trial-2355↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31751)] [trial-2355↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 05:54:45.102225 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 05:54:45.166758 run osmo-hlr_10.42.42.2(pid=31748): ERR: Terminated: ERROR {rc=237} [trial-2355↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31748)] 05:54:45.219324 run osmo-hlr_10.42.42.2(pid=31748): stdout: | (launched: 2022-12-09_05:54:41.656873) 05:54:45.272348 run osmo-hlr_10.42.42.2(pid=31748): stderr: | �[0;m�[1;31m20221209055441880 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209055441880 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209055441881 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209055441881 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209055441881 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209055441881 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209055441893 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2355/run.2022-12-09_05-28-02/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209055441903 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209055441903 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209055441903 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 05:54:45.317985 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31741): Terminating (SIGTERM) 05:54:45.360852 run iperf3-srv_10.42.42.10(pid=31742): Terminating (SIGTERM) 05:54:45.403969 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31743): Terminating (SIGTERM) 05:54:45.447242 run iperf3-srv_10.42.42.10(pid=31744): Terminating (SIGTERM) 05:54:45.490066 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31747): Terminating (SIGTERM) 05:54:45.533076 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31750): Terminating (SIGTERM) 05:54:45.576232 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31753): Terminating (SIGTERM) 05:54:45.586431 --- ParallelTerminationStrategy: PID 31741 died... 05:54:45.643734 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31741): Terminated: ok {rc=0} 05:54:45.654182 --- ParallelTerminationStrategy: PID 31742 died... 05:54:45.711226 run iperf3-srv_10.42.42.10(pid=31742): Terminated {rc=256} 05:54:45.721622 --- ParallelTerminationStrategy: PID 31743 died... 05:54:45.778590 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31743): Terminated: ok {rc=0} 05:54:45.789226 --- ParallelTerminationStrategy: PID 31744 died... 05:54:45.854126 run iperf3-srv_10.42.42.10(pid=31744): Terminated {rc=256} 05:54:45.873346 --- ParallelTerminationStrategy: PID 31747 died... 05:54:45.947230 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31747): Terminated: ok {rc=0} 05:54:45.957955 --- ParallelTerminationStrategy: PID 31750 died... 05:54:46.016096 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31750): Terminated: ok {rc=0} 05:54:46.026892 --- ParallelTerminationStrategy: PID 31753 died... 05:54:46.085461 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31753): Terminated: ok {rc=0} 05:54:46.176674 bus /gobi_0: Setting Powered False 05:54:47.297307 bus /gobi_0: Setting Powered False 05:54:48.406928 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31751): Process ended prematurely: osmo-stp_10.42.42.5(pid=31751) [trial-2355↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31751)]