Failed
dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo.switch_tch_pdch.py (from dynts_trx-lms-limenet-micro+mod-bts0-dynts67-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=10347): Process ended prematurely: osmo-stp_10.42.42.5(pid=10347) [trial-2356↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10347)]
Standard Output
---------------------------------------------- trial-2356 dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo switch_tch_pdch.py ---------------------------------------------- 07:55:50.464205 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 07:55:50.475959 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x bts (candidates: 1) 07:55:50.634480 tst switch_tch_pdch.py: using LAC 20029 07:55:50.764712 tst switch_tch_pdch.py: using RAC 139 07:55:50.886897 tst switch_tch_pdch.py: using CellId 20029 07:55:51.011280 tst switch_tch_pdch.py: using BVCI 20030 07:55:51.035593 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 07:55:51.047294 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 07:55:51.058878 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 07:55:51.070444 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 07:55:51.081984 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 07:55:51.093492 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 07:55:51.105157 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 07:55:51.116661 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 07:55:51.232872 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 07:55:51.524290 tst switch_tch_pdch.py:51: start network... 07:55:51.657292 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:55:52.138681 run create_hlr_db(pid=10341): Launched 07:55:52.267294 bus /gobi_6: Setting Powered False 07:55:53.343636 run create_hlr_db(pid=10341): Terminated: ok {rc=0} 07:55:53.739437 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10343): Launched 07:55:54.057542 run osmo-hlr_10.42.42.2(pid=10344): Launched 07:55:54.173689 run osmo-stp_10.42.42.5: Starting osmo-stp 07:55:54.697926 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10346): Launched 07:55:55.016475 run osmo-stp_10.42.42.5(pid=10347): Launched 07:55:55.131096 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:55:55.658432 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10349): Launched 07:55:55.772380 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:55:56.049846 run patchelf(pid=10350): Launched 07:55:56.235334 run osmo-stp_10.42.42.5(pid=10347): ERR: Terminated: ERROR {rc=1} [trial-2356↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10347)] 07:55:56.370973 run osmo-stp_10.42.42.5(pid=10347): stdout: | (launched: 2022-12-09_07:55:54.859085) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:55:56.507219 run osmo-stp_10.42.42.5(pid=10347): stderr: | �[0;m�[38;5;43m20221209075555048 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209075555048 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209075555048 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209075555048 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209075555049 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209075555049 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209075555049 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:55:56.638738 run osmo-stp_10.42.42.5(pid=10347): stdout: | (launched: 2022-12-09_07:55:54.859085) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:55:56.768563 run osmo-stp_10.42.42.5(pid=10347): stderr: | �[0;m�[38;5;43m20221209075555048 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209075555048 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209075555048 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209075555048 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209075555049 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209075555049 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209075555049 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:55:56.919382 run patchelf(pid=10350): Terminating (SIGINT) 07:55:57.096251 run patchelf(pid=10350): Terminated: ok {rc=0} 07:55:57.128846 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=10347): Process ended prematurely: osmo-stp_10.42.42.5(pid=10347) [trial-2356↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10347)] [trial-2356↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54] 07:55:57.138271 tst switch_tch_pdch.py:54: Test FAILED (6.7 sec) 07:55:57.200304 run osmo-hlr_10.42.42.2(pid=10344): ERR: Terminated: ERROR {rc=237} [trial-2356↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10344)] 07:55:57.251377 run osmo-hlr_10.42.42.2(pid=10344): stdout: | (launched: 2022-12-09_07:55:53.901621) 07:55:57.303190 run osmo-hlr_10.42.42.2(pid=10344): stderr: | �[0;m�[1;31m20221209075554098 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209075554098 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209075554098 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209075554098 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209075554098 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209075554098 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209075554128 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2356/run.2022-12-09_06-55-12/dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209075554139 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209075554139 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209075554139 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:55:57.346968 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10343): Terminating (SIGTERM) 07:55:57.388659 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10346): Terminating (SIGTERM) 07:55:57.430268 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10349): Terminating (SIGTERM) 07:55:57.439661 --- ParallelTerminationStrategy: PID 10343 died... 07:55:57.494955 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10343): Terminated: ok {rc=0} 07:55:57.504876 --- ParallelTerminationStrategy: PID 10346 died... 07:55:57.560150 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10346): Terminated: ok {rc=0} 07:55:57.570156 --- ParallelTerminationStrategy: PID 10349 died... 07:55:57.625405 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10349): Terminated: ok {rc=0} 07:55:57.713096 bus /gobi_0: Setting Powered False 07:55:58.818916 bus /gobi_0: Setting Powered False 07:55:59.926179 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10347): Process ended prematurely: osmo-stp_10.42.42.5(pid=10347) [trial-2356↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10347)]