Failed
gprs:sysmo+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=4998): Process ended prematurely: osmo-stp_10.42.42.5(pid=4998) [trial-2356↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4998)]
Standard Output
---------------------------------------------- trial-2356 gprs:sysmo+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 07:02:07.631465 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:02:07.642385 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 07:02:07.770526 tst cs_paging_gprs_active.py: using LAC 19745 07:02:07.894080 tst cs_paging_gprs_active.py: using RAC 110 07:02:08.015502 tst cs_paging_gprs_active.py: using CellId 19745 07:02:08.139188 tst cs_paging_gprs_active.py: using BVCI 19746 07:02:08.163150 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:02:08.174171 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:02:08.184749 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:02:08.195688 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:02:08.206569 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:02:08.217522 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:02:08.228542 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:02:08.239437 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:02:08.250531 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 07:02:08.375002 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 07:02:08.664336 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 07:02:08.794836 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:02:09.120472 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4988): Launched 07:02:09.390831 run iperf3-srv_10.42.42.10(pid=4989): Launched 07:02:09.580893 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 07:02:09.711080 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:02:10.035836 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4990): Launched 07:02:10.307995 run iperf3-srv_10.42.42.10(pid=4991): Launched 07:02:10.498272 tst cs_paging_gprs_active.py:38: start network... 07:02:10.628391 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:02:11.120284 run create_hlr_db(pid=4992): Launched 07:02:11.299292 bus /gobi_6: Setting Powered False 07:02:12.321131 run create_hlr_db(pid=4992): Terminated: ok {rc=0} 07:02:12.766254 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4994): Launched 07:02:13.102781 run osmo-hlr_10.42.42.2(pid=4995): Launched 07:02:13.224550 run osmo-stp_10.42.42.5: Starting osmo-stp 07:02:13.804104 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4997): Launched 07:02:14.142280 run osmo-stp_10.42.42.5(pid=4998): Launched 07:02:14.263682 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:02:14.847544 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5000): Launched 07:02:14.966639 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:02:15.259015 run patchelf(pid=5001): Launched 07:02:15.453829 run osmo-stp_10.42.42.5(pid=4998): ERR: Terminated: ERROR {rc=1} [trial-2356↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4998)] 07:02:15.596173 run osmo-stp_10.42.42.5(pid=4998): stdout: | (launched: 2022-12-09_07:02:13.975442) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:02:15.738706 run osmo-stp_10.42.42.5(pid=4998): stderr: | �[0;m�[38;5;43m20221209070214172 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209070214172 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209070214172 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209070214172 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209070214173 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209070214173 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209070214173 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:02:15.880807 run osmo-stp_10.42.42.5(pid=4998): stdout: | (launched: 2022-12-09_07:02:13.975442) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:02:16.019926 run osmo-stp_10.42.42.5(pid=4998): stderr: | �[0;m�[38;5;43m20221209070214172 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209070214172 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209070214172 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209070214172 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209070214173 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209070214173 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209070214173 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:02:16.179970 run patchelf(pid=5001): Terminating (SIGINT) 07:02:16.361878 run patchelf(pid=5001): Terminated: ok {rc=0} 07:02:16.395537 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=4998): Process ended prematurely: osmo-stp_10.42.42.5(pid=4998) [trial-2356↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4998)] [trial-2356↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 07:02:16.406062 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 07:02:16.473261 run osmo-hlr_10.42.42.2(pid=4995): ERR: Terminated: ERROR {rc=237} [trial-2356↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4995)] 07:02:16.526886 run osmo-hlr_10.42.42.2(pid=4995): stdout: | (launched: 2022-12-09_07:02:12.936630) 07:02:16.580320 run osmo-hlr_10.42.42.2(pid=4995): stderr: | �[0;m�[1;31m20221209070213139 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209070213139 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209070213139 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209070213139 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209070213139 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209070213139 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209070213152 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2356/run.2022-12-09_06-55-12/gprs:sysmo+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209070213162 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209070213162 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209070213162 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:02:16.624545 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4988): Terminating (SIGTERM) 07:02:16.670361 run iperf3-srv_10.42.42.10(pid=4989): Terminating (SIGTERM) 07:02:16.713991 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4990): Terminating (SIGTERM) 07:02:16.758343 run iperf3-srv_10.42.42.10(pid=4991): Terminating (SIGTERM) 07:02:16.801191 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4994): Terminating (SIGTERM) 07:02:16.844296 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4997): Terminating (SIGTERM) 07:02:16.891454 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5000): Terminating (SIGTERM) 07:02:16.903308 --- ParallelTerminationStrategy: PID 4988 died... 07:02:16.962745 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4988): Terminated: ok {rc=0} 07:02:16.973431 --- ParallelTerminationStrategy: PID 4989 died... 07:02:17.030894 run iperf3-srv_10.42.42.10(pid=4989): Terminated {rc=256} 07:02:17.041546 --- ParallelTerminationStrategy: PID 4990 died... 07:02:17.100071 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4990): Terminated: ok {rc=0} 07:02:17.111210 --- ParallelTerminationStrategy: PID 4991 died... 07:02:17.168202 run iperf3-srv_10.42.42.10(pid=4991): Terminated {rc=256} 07:02:17.178845 --- ParallelTerminationStrategy: PID 4994 died... 07:02:17.235886 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4994): Terminated: ok {rc=0} 07:02:17.245716 --- ParallelTerminationStrategy: PID 4997 died... 07:02:17.300418 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4997): Terminated: ok {rc=0} 07:02:17.311003 --- ParallelTerminationStrategy: PID 5000 died... 07:02:17.365616 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5000): Terminated: ok {rc=0} 07:02:17.452103 bus /gobi_0: Setting Powered False 07:02:18.556037 bus /gobi_0: Setting Powered False 07:02:19.664047 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4998): Process ended prematurely: osmo-stp_10.42.42.5(pid=4998) [trial-2356↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4998)]