Failed
gprs:trx-lms-limenet-micro.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=9791): Process ended prematurely: osmo-stp_10.42.42.5(pid=9791) [trial-2356↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9791)]
Standard Output
---------------------------------------------- trial-2356 gprs:trx-lms-limenet-micro cs_paging_gprs_active.py ---------------------------------------------- 07:51:39.244914 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 07:51:39.256395 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 07:51:39.397644 tst cs_paging_gprs_active.py: using LAC 20008 07:51:39.526718 tst cs_paging_gprs_active.py: using RAC 118 07:51:39.653533 tst cs_paging_gprs_active.py: using CellId 20008 07:51:39.773640 tst cs_paging_gprs_active.py: using BVCI 20009 07:51:39.796925 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 07:51:39.808039 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 07:51:39.819082 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 07:51:39.830394 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 07:51:39.841659 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 07:51:39.852484 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 07:51:39.863833 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 07:51:39.874774 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 07:51:39.886101 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 07:51:40.006802 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 07:51:40.287098 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 07:51:40.414439 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:51:40.731682 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9781): Launched 07:51:40.993069 run iperf3-srv_10.42.42.10(pid=9782): Launched 07:51:41.178141 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 07:51:41.304369 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:51:41.617930 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9783): Launched 07:51:41.879661 run iperf3-srv_10.42.42.10(pid=9784): Launched 07:51:42.064823 tst cs_paging_gprs_active.py:38: start network... 07:51:42.191666 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:51:42.669006 run create_hlr_db(pid=9785): Launched 07:51:42.843222 bus /sierra_2: Setting Powered False 07:51:43.865363 run create_hlr_db(pid=9785): Terminated: ok {rc=0} 07:51:44.299222 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9787): Launched 07:51:44.628058 run osmo-hlr_10.42.42.2(pid=9788): Launched 07:51:44.748340 run osmo-stp_10.42.42.5: Starting osmo-stp 07:51:45.314703 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9790): Launched 07:51:45.641353 run osmo-stp_10.42.42.5(pid=9791): Launched 07:51:45.760100 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:51:46.346401 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9793): Launched 07:51:46.466145 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:51:46.776888 run patchelf(pid=9794): Launched 07:51:46.972036 run osmo-stp_10.42.42.5(pid=9791): ERR: Terminated: ERROR {rc=1} [trial-2356↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9791)] 07:51:47.114286 run osmo-stp_10.42.42.5(pid=9791): stdout: | (launched: 2022-12-09_07:51:45.480401) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:51:47.255297 run osmo-stp_10.42.42.5(pid=9791): stderr: | �[0;m�[38;5;43m20221209075145672 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209075145672 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209075145672 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209075145673 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209075145673 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209075145673 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209075145673 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:51:47.391053 run osmo-stp_10.42.42.5(pid=9791): stdout: | (launched: 2022-12-09_07:51:45.480401) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:51:47.524814 run osmo-stp_10.42.42.5(pid=9791): stderr: | �[0;m�[38;5;43m20221209075145672 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209075145672 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209075145672 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209075145673 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209075145673 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209075145673 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209075145673 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:51:47.679835 run patchelf(pid=9794): Terminating (SIGINT) 07:51:47.862278 run patchelf(pid=9794): Terminated: ok {rc=0} 07:51:47.895769 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=9791): Process ended prematurely: osmo-stp_10.42.42.5(pid=9791) [trial-2356↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9791)] [trial-2356↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38] 07:51:47.905811 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 07:51:47.968610 run osmo-hlr_10.42.42.2(pid=9788): ERR: Terminated: ERROR {rc=237} [trial-2356↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9788)] 07:51:48.019973 run osmo-hlr_10.42.42.2(pid=9788): stdout: | (launched: 2022-12-09_07:51:44.465710) 07:51:48.072141 run osmo-hlr_10.42.42.2(pid=9788): stderr: | �[0;m�[1;31m20221209075144663 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209075144663 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209075144663 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209075144663 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209075144663 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209075144663 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209075144677 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2356/run.2022-12-09_06-55-12/gprs:trx-lms-limenet-micro/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209075144685 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209075144685 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209075144685 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:51:48.116461 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9781): Terminating (SIGTERM) 07:51:48.158217 run iperf3-srv_10.42.42.10(pid=9782): Terminating (SIGTERM) 07:51:48.199833 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9783): Terminating (SIGTERM) 07:51:48.241645 run iperf3-srv_10.42.42.10(pid=9784): Terminating (SIGTERM) 07:51:48.283794 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9787): Terminating (SIGTERM) 07:51:48.325796 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9790): Terminating (SIGTERM) 07:51:48.367774 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9793): Terminating (SIGTERM) 07:51:48.377663 --- ParallelTerminationStrategy: PID 9781 died... 07:51:48.433522 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9781): Terminated: ok {rc=0} 07:51:48.443738 --- ParallelTerminationStrategy: PID 9782 died... 07:51:48.499322 run iperf3-srv_10.42.42.10(pid=9782): Terminated {rc=256} 07:51:48.509813 --- ParallelTerminationStrategy: PID 9783 died... 07:51:48.565297 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9783): Terminated: ok {rc=0} 07:51:48.575377 --- ParallelTerminationStrategy: PID 9784 died... 07:51:48.630780 run iperf3-srv_10.42.42.10(pid=9784): Terminated {rc=256} 07:51:48.640783 --- ParallelTerminationStrategy: PID 9787 died... 07:51:48.696219 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9787): Terminated: ok {rc=0} 07:51:48.706338 --- ParallelTerminationStrategy: PID 9790 died... 07:51:48.761695 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9790): Terminated: ok {rc=0} 07:51:48.771784 --- ParallelTerminationStrategy: PID 9793 died... 07:51:48.827252 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9793): Terminated: ok {rc=0} 07:51:48.913419 bus /gobi_0: Setting Powered False 07:51:50.020095 bus /gobi_0: Setting Powered False 07:51:51.127039 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9791): Process ended prematurely: osmo-stp_10.42.42.5(pid=9791) [trial-2356↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9791)]