Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-lms.ping.py (from gprs_trx-lms)

Failing for the past 30 builds (Since #2327 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=8751): Process ended prematurely: osmo-stp_10.42.42.5(pid=8751) [trial-2356↪gprs:trx-lms↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8751)]

Standard Output

----------------------------------------------
trial-2356 gprs:trx-lms ping.py
----------------------------------------------
07:44:29.359254 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
07:44:29.371198 tst                     gprs:trx-lms: Using 1 x bts (candidates: 1)
07:44:29.515923 tst                          ping.py: using LAC 19969
07:44:29.637797 tst                          ping.py: using RAC 79
07:44:29.759238 tst                          ping.py: using CellId 19969
07:44:29.882311 tst                          ping.py: using BVCI 19970
07:44:29.906437 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
07:44:29.917601 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
07:44:29.928453 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
07:44:29.939336 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
07:44:29.950108 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
07:44:29.960856 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
07:44:29.971907 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
07:44:29.982896 tst                     gprs:trx-lms: Using 1 x modem (candidates: 4)
07:44:30.254839 tst                       ping.py:19: start network...
07:44:30.378202 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
07:44:30.843485 run          create_hlr_db(pid=8745): Launched
07:44:31.022734 bus                          /gobi_6: Setting Powered False
07:44:32.077240 run          create_hlr_db(pid=8745): Terminated: ok {rc=0}
07:44:32.486125 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8747): Launched
07:44:32.781558 run    osmo-hlr_10.42.42.2(pid=8748): Launched
07:44:32.894507 run              osmo-stp_10.42.42.5: Starting osmo-stp
07:44:33.414500 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8750): Launched
07:44:33.708035 run    osmo-stp_10.42.42.5(pid=8751): Launched
07:44:33.814511 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
07:44:34.326111 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8753): Launched
07:44:34.430964 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
07:44:34.687932 run               patchelf(pid=8754): Launched
07:44:34.860940 run    osmo-stp_10.42.42.5(pid=8751): ERR: Terminated: ERROR {rc=1}  [trial-2356↪gprs:trx-lms↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8751)]
07:44:34.987804 run    osmo-stp_10.42.42.5(pid=8751): stdout: 
| (launched: 2022-12-09_07:44:33.563098)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
07:44:35.114977 run    osmo-stp_10.42.42.5(pid=8751): stderr: 
| �[0;m�[38;5;43m20221209074433731 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209074433731 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209074433732 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209074433732 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209074433733 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209074433733 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209074433733 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
07:44:35.237364 run    osmo-stp_10.42.42.5(pid=8751): stdout: 
| (launched: 2022-12-09_07:44:33.563098)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
07:44:35.358998 run    osmo-stp_10.42.42.5(pid=8751): stderr: 
| �[0;m�[38;5;43m20221209074433731 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209074433731 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209074433732 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209074433732 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209074433733 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209074433733 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209074433733 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
07:44:35.499547 run               patchelf(pid=8754): Terminating (SIGINT)
07:44:35.664910 run               patchelf(pid=8754): Terminated: ok {rc=0}
07:44:35.695343 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=8751): Process ended prematurely: osmo-stp_10.42.42.5(pid=8751) [trial-2356↪gprs:trx-lms↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8751)]  [trial-2356↪gprs:trx-lms↪ping.py:22]
07:44:35.704043 tst                       ping.py:22: Test FAILED (6.3 sec)
07:44:35.764290 run    osmo-hlr_10.42.42.2(pid=8748): ERR: Terminated: ERROR {rc=237}  [trial-2356↪gprs:trx-lms↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8748)]
07:44:35.813341 run    osmo-hlr_10.42.42.2(pid=8748): stdout: 
| (launched: 2022-12-09_07:44:32.635291) 
07:44:35.863156 run    osmo-hlr_10.42.42.2(pid=8748): stderr: 
| �[0;m�[1;31m20221209074432806 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209074432806 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209074432806 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209074432806 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209074432806 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209074432806 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209074432818 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2356/run.2022-12-09_06-55-12/gprs:trx-lms/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209074432828 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209074432828 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209074432828 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
07:44:35.905221 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8747): Terminating (SIGTERM)
07:44:35.944932 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8750): Terminating (SIGTERM)
07:44:35.984526 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8753): Terminating (SIGTERM)
07:44:35.993990 ---      ParallelTerminationStrategy: PID 8747 died...
07:44:36.047536 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8747): Terminated: ok {rc=0}
07:44:36.057829 ---      ParallelTerminationStrategy: PID 8750 died...
07:44:36.110818 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8750): Terminated: ok {rc=0}
07:44:36.120825 ---      ParallelTerminationStrategy: PID 8753 died...
07:44:36.173594 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8753): Terminated: ok {rc=0}
07:44:36.261465 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8751): Process ended prematurely: osmo-stp_10.42.42.5(pid=8751) [trial-2356↪gprs:trx-lms↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8751)]