Failed
gprs:trx-sysmocell5000+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=7309): Process ended prematurely: osmo-stp_10.42.42.5(pid=7309) [trial-2356↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7309)]
Standard Output
---------------------------------------------- trial-2356 gprs:trx-sysmocell5000+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 07:27:41.476875 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:27:41.488464 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x bts (candidates: 1) 07:27:41.637677 tst cs_paging_gprs_active.py: using LAC 19880 07:27:41.765362 tst cs_paging_gprs_active.py: using RAC 245 07:27:41.894206 tst cs_paging_gprs_active.py: using CellId 19880 07:27:42.021343 tst cs_paging_gprs_active.py: using BVCI 19881 07:27:42.046151 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:27:42.057625 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:27:42.068797 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:27:42.080683 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:27:42.093678 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:27:42.104819 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:27:42.115973 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:27:42.127020 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:27:42.138388 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 07:27:42.257388 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 07:27:42.537933 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 07:27:42.664096 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:27:42.976041 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7299): Launched 07:27:43.235044 run iperf3-srv_10.42.42.10(pid=7300): Launched 07:27:43.418890 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 07:27:43.545251 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:27:43.857546 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7301): Launched 07:27:44.117622 run iperf3-srv_10.42.42.10(pid=7302): Launched 07:27:44.302280 tst cs_paging_gprs_active.py:38: start network... 07:27:44.428914 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:27:44.906636 run create_hlr_db(pid=7303): Launched 07:27:45.081193 bus /gobi_6: Setting Powered False 07:27:46.124248 run create_hlr_db(pid=7303): Terminated: ok {rc=0} 07:27:46.578147 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7305): Launched 07:27:46.930546 run osmo-hlr_10.42.42.2(pid=7306): Launched 07:27:47.099340 run osmo-stp_10.42.42.5: Starting osmo-stp 07:27:47.677086 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7308): Launched 07:27:47.979561 run osmo-stp_10.42.42.5(pid=7309): Launched 07:27:48.090648 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:27:48.616654 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7311): Launched 07:27:48.724052 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:27:48.986265 run patchelf(pid=7312): Launched 07:27:49.162380 run osmo-stp_10.42.42.5(pid=7309): ERR: Terminated: ERROR {rc=1} [trial-2356↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7309)] 07:27:49.290852 run osmo-stp_10.42.42.5(pid=7309): stdout: | (launched: 2022-12-09_07:27:47.831163) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:27:49.420093 run osmo-stp_10.42.42.5(pid=7309): stderr: | �[0;m�[38;5;43m20221209072747999 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209072747999 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209072747999 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209072747999 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209072748000 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209072748000 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209072748000 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:27:49.544756 run osmo-stp_10.42.42.5(pid=7309): stdout: | (launched: 2022-12-09_07:27:47.831163) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:27:49.668669 run osmo-stp_10.42.42.5(pid=7309): stderr: | �[0;m�[38;5;43m20221209072747999 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209072747999 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209072747999 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209072747999 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209072748000 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209072748000 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209072748000 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:27:49.812241 run patchelf(pid=7312): Terminating (SIGINT) 07:27:49.980521 run patchelf(pid=7312): Terminated: ok {rc=0} 07:27:50.011579 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=7309): Process ended prematurely: osmo-stp_10.42.42.5(pid=7309) [trial-2356↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7309)] [trial-2356↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 07:27:50.020872 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 07:27:50.081412 run osmo-hlr_10.42.42.2(pid=7306): ERR: Terminated: ERROR {rc=237} [trial-2356↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7306)] 07:27:50.130406 run osmo-hlr_10.42.42.2(pid=7306): stdout: | (launched: 2022-12-09_07:27:46.747952) 07:27:50.179890 run osmo-hlr_10.42.42.2(pid=7306): stderr: | �[0;m�[1;31m20221209072747152 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209072747152 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209072747152 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209072747152 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209072747152 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209072747152 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209072747164 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2356/run.2022-12-09_06-55-12/gprs:trx-sysmocell5000+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209072747184 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209072747189 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209072747189 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:27:50.221826 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7299): Terminating (SIGTERM) 07:27:50.261420 run iperf3-srv_10.42.42.10(pid=7300): Terminating (SIGTERM) 07:27:50.301010 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7301): Terminating (SIGTERM) 07:27:50.340642 run iperf3-srv_10.42.42.10(pid=7302): Terminating (SIGTERM) 07:27:50.380200 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7305): Terminating (SIGTERM) 07:27:50.419508 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7308): Terminating (SIGTERM) 07:27:50.459850 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7311): Terminating (SIGTERM) 07:27:50.469082 --- ParallelTerminationStrategy: PID 7299 died... 07:27:50.521668 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7299): Terminated: ok {rc=0} 07:27:50.531365 --- ParallelTerminationStrategy: PID 7300 died... 07:27:50.584112 run iperf3-srv_10.42.42.10(pid=7300): Terminated {rc=256} 07:27:50.593989 --- ParallelTerminationStrategy: PID 7301 died... 07:27:50.646761 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7301): Terminated: ok {rc=0} 07:27:50.656144 --- ParallelTerminationStrategy: PID 7302 died... 07:27:50.708731 run iperf3-srv_10.42.42.10(pid=7302): Terminated {rc=256} 07:27:50.718108 --- ParallelTerminationStrategy: PID 7305 died... 07:27:50.770382 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7305): Terminated: ok {rc=0} 07:27:50.779789 --- ParallelTerminationStrategy: PID 7308 died... 07:27:50.832259 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7308): Terminated: ok {rc=0} 07:27:50.841907 --- ParallelTerminationStrategy: PID 7311 died... 07:27:50.894076 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7311): Terminated: ok {rc=0} 07:27:50.982827 bus /gobi_0: Setting Powered False 07:27:52.086806 bus /gobi_0: Setting Powered False 07:27:53.194476 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7309): Process ended prematurely: osmo-stp_10.42.42.5(pid=7309) [trial-2356↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7309)]