Failed
gprs:oc2g+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=14984): Process ended prematurely: osmo-stp_10.42.42.5(pid=14984) [trial-2357↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14984)]
Standard Output
---------------------------------------------- trial-2357 gprs:oc2g+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 08:38:36.312228 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:38:36.323750 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 08:38:36.479923 tst cs_paging_gprs_active.py: using LAC 20253 08:38:36.609394 tst cs_paging_gprs_active.py: using RAC 108 08:38:36.740356 tst cs_paging_gprs_active.py: using CellId 20253 08:38:36.871046 tst cs_paging_gprs_active.py: using BVCI 20254 08:38:36.896311 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:38:36.907830 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:38:36.919054 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:38:36.930986 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:38:36.942840 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:38:36.954855 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:38:36.966921 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:38:36.978718 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:38:36.991809 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 08:38:37.111600 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 08:38:37.397739 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:38:37.527293 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:38:37.849758 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14974): Launched 08:38:38.118642 run iperf3-srv_10.42.42.10(pid=14975): Launched 08:38:38.307102 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:38:38.436198 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:38:38.756757 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14976): Launched 08:38:39.021926 run iperf3-srv_10.42.42.10(pid=14977): Launched 08:38:39.210251 tst cs_paging_gprs_active.py:38: start network... 08:38:39.338891 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:38:39.835343 run create_hlr_db(pid=14978): Launched 08:38:40.013114 bus /gobi_6: Setting Powered False 08:38:41.034197 run create_hlr_db(pid=14978): Terminated: ok {rc=0} 08:38:41.472273 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14980): Launched 08:38:41.805102 run osmo-hlr_10.42.42.2(pid=14981): Launched 08:38:41.926910 run osmo-stp_10.42.42.5: Starting osmo-stp 08:38:42.499744 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14983): Launched 08:38:42.832148 run osmo-stp_10.42.42.5(pid=14984): Launched 08:38:42.952066 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:38:43.527373 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14986): Launched 08:38:43.645961 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:38:43.934443 run patchelf(pid=14987): Launched 08:38:44.127404 run osmo-stp_10.42.42.5(pid=14984): ERR: Terminated: ERROR {rc=1} [trial-2357↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14984)] 08:38:44.267942 run osmo-stp_10.42.42.5(pid=14984): stdout: | (launched: 2022-12-09_08:38:42.669102) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:38:44.408868 run osmo-stp_10.42.42.5(pid=14984): stderr: | �[0;m�[38;5;43m20221209083842861 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209083842861 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209083842861 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209083842862 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209083842862 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209083842862 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209083842862 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:38:44.545403 run osmo-stp_10.42.42.5(pid=14984): stdout: | (launched: 2022-12-09_08:38:42.669102) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:38:44.681097 run osmo-stp_10.42.42.5(pid=14984): stderr: | �[0;m�[38;5;43m20221209083842861 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209083842861 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209083842861 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209083842862 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209083842862 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209083842862 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209083842862 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:38:44.838743 run patchelf(pid=14987): Terminating (SIGINT) 08:38:45.023503 run patchelf(pid=14987): Terminated: ok {rc=0} 08:38:45.057336 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=14984): Process ended prematurely: osmo-stp_10.42.42.5(pid=14984) [trial-2357↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14984)] [trial-2357↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 08:38:45.067161 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 08:38:45.130892 run osmo-hlr_10.42.42.2(pid=14981): ERR: Terminated: ERROR {rc=237} [trial-2357↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14981)] 08:38:45.182516 run osmo-hlr_10.42.42.2(pid=14981): stdout: | (launched: 2022-12-09_08:38:41.641399) 08:38:45.234972 run osmo-hlr_10.42.42.2(pid=14981): stderr: | �[0;m�[1;31m20221209083841839 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209083841839 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209083841839 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209083841839 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209083841839 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209083841839 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209083841851 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2357/run.2022-12-09_08-22-41/gprs:oc2g+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209083841859 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209083841860 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209083841860 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:38:45.279345 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14974): Terminating (SIGTERM) 08:38:45.321538 run iperf3-srv_10.42.42.10(pid=14975): Terminating (SIGTERM) 08:38:45.363600 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14976): Terminating (SIGTERM) 08:38:45.405687 run iperf3-srv_10.42.42.10(pid=14977): Terminating (SIGTERM) 08:38:45.448172 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14980): Terminating (SIGTERM) 08:38:45.490464 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14983): Terminating (SIGTERM) 08:38:45.532455 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14986): Terminating (SIGTERM) 08:38:45.542157 --- ParallelTerminationStrategy: PID 14974 died... 08:38:45.598293 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14974): Terminated: ok {rc=0} 08:38:45.608215 --- ParallelTerminationStrategy: PID 14975 died... 08:38:45.664181 run iperf3-srv_10.42.42.10(pid=14975): Terminated {rc=256} 08:38:45.674078 --- ParallelTerminationStrategy: PID 14976 died... 08:38:45.729404 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14976): Terminated: ok {rc=0} 08:38:45.739470 --- ParallelTerminationStrategy: PID 14977 died... 08:38:45.794953 run iperf3-srv_10.42.42.10(pid=14977): Terminated {rc=256} 08:38:45.804707 --- ParallelTerminationStrategy: PID 14980 died... 08:38:45.868453 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14980): Terminated: ok {rc=0} 08:38:45.879341 --- ParallelTerminationStrategy: PID 14983 died... 08:38:45.936115 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14983): Terminated: ok {rc=0} 08:38:45.946445 --- ParallelTerminationStrategy: PID 14986 died... 08:38:46.003120 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14986): Terminated: ok {rc=0} 08:38:46.097500 bus /gobi_0: Setting Powered False 08:38:47.225577 bus /gobi_0: Setting Powered False 08:38:48.336814 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14984): Process ended prematurely: osmo-stp_10.42.42.5(pid=14984) [trial-2357↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14984)]