Failed
gprs:trx-sysmocell5000+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=17474): Process ended prematurely: osmo-stp_10.42.42.5(pid=17474) [trial-2357↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17474)]
Standard Output
---------------------------------------------- trial-2357 gprs:trx-sysmocell5000+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 08:55:16.673763 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:55:16.686432 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x bts (candidates: 1) 08:55:16.863225 tst cs_paging_gprs_active.py: using LAC 20341 08:55:16.991686 tst cs_paging_gprs_active.py: using RAC 196 08:55:17.148673 tst cs_paging_gprs_active.py: using CellId 20341 08:55:17.274933 tst cs_paging_gprs_active.py: using BVCI 20342 08:55:17.301407 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:55:17.313340 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:55:17.325767 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:55:17.337216 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:55:17.349349 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:55:17.360757 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:55:17.372622 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:55:17.384188 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:55:17.395948 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 08:55:17.514180 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 08:55:17.814649 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:55:17.951991 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:55:18.290213 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17464): Launched 08:55:18.570727 run iperf3-srv_10.42.42.10(pid=17465): Launched 08:55:18.771731 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:55:18.908672 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:55:19.246400 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17466): Launched 08:55:19.526071 run iperf3-srv_10.42.42.10(pid=17467): Launched 08:55:19.726627 tst cs_paging_gprs_active.py:38: start network... 08:55:19.863031 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:55:20.378594 run create_hlr_db(pid=17468): Launched 08:55:20.568572 bus /gobi_6: Setting Powered False 08:55:21.589458 run create_hlr_db(pid=17468): Terminated: ok {rc=0} 08:55:22.024006 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17470): Launched 08:55:22.351917 run osmo-hlr_10.42.42.2(pid=17471): Launched 08:55:22.473560 run osmo-stp_10.42.42.5: Starting osmo-stp 08:55:23.041569 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17473): Launched 08:55:23.368584 run osmo-stp_10.42.42.5(pid=17474): Launched 08:55:23.487960 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:55:24.059537 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17476): Launched 08:55:24.177745 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:55:24.463323 run patchelf(pid=17477): Launched 08:55:24.653732 run osmo-stp_10.42.42.5(pid=17474): ERR: Terminated: ERROR {rc=1} [trial-2357↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17474)] 08:55:24.792761 run osmo-stp_10.42.42.5(pid=17474): stdout: | (launched: 2022-12-09_08:55:23.208351) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:55:24.931754 run osmo-stp_10.42.42.5(pid=17474): stderr: | �[0;m�[38;5;43m20221209085523396 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209085523397 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209085523397 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209085523397 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209085523398 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209085523398 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209085523398 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:55:25.066641 run osmo-stp_10.42.42.5(pid=17474): stdout: | (launched: 2022-12-09_08:55:23.208351) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:55:25.200929 run osmo-stp_10.42.42.5(pid=17474): stderr: | �[0;m�[38;5;43m20221209085523396 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209085523397 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209085523397 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209085523397 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209085523398 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209085523398 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209085523398 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:55:25.356498 run patchelf(pid=17477): Terminating (SIGINT) 08:55:25.538719 run patchelf(pid=17477): Terminated: ok {rc=0} 08:55:25.571986 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=17474): Process ended prematurely: osmo-stp_10.42.42.5(pid=17474) [trial-2357↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17474)] [trial-2357↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 08:55:25.581788 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 08:55:25.644770 run osmo-hlr_10.42.42.2(pid=17471): ERR: Terminated: ERROR {rc=237} [trial-2357↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=17471)] 08:55:25.695726 run osmo-hlr_10.42.42.2(pid=17471): stdout: | (launched: 2022-12-09_08:55:22.191684) 08:55:25.747973 run osmo-hlr_10.42.42.2(pid=17471): stderr: | �[0;m�[1;31m20221209085522386 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209085522386 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209085522386 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209085522386 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209085522386 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209085522386 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209085522398 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2357/run.2022-12-09_08-22-41/gprs:trx-sysmocell5000+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209085522406 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209085522406 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209085522406 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:55:25.792268 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17464): Terminating (SIGTERM) 08:55:25.834135 run iperf3-srv_10.42.42.10(pid=17465): Terminating (SIGTERM) 08:55:25.876145 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17466): Terminating (SIGTERM) 08:55:25.918466 run iperf3-srv_10.42.42.10(pid=17467): Terminating (SIGTERM) 08:55:25.959949 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17470): Terminating (SIGTERM) 08:55:26.001831 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17473): Terminating (SIGTERM) 08:55:26.043689 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17476): Terminating (SIGTERM) 08:55:26.053583 --- ParallelTerminationStrategy: PID 17464 died... 08:55:26.109793 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17464): Terminated: ok {rc=0} 08:55:26.120006 --- ParallelTerminationStrategy: PID 17465 died... 08:55:26.175501 run iperf3-srv_10.42.42.10(pid=17465): Terminated {rc=256} 08:55:26.185682 --- ParallelTerminationStrategy: PID 17466 died... 08:55:26.241337 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17466): Terminated: ok {rc=0} 08:55:26.251292 --- ParallelTerminationStrategy: PID 17467 died... 08:55:26.306527 run iperf3-srv_10.42.42.10(pid=17467): Terminated {rc=256} 08:55:26.316449 --- ParallelTerminationStrategy: PID 17470 died... 08:55:26.371824 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17470): Terminated: ok {rc=0} 08:55:26.381983 --- ParallelTerminationStrategy: PID 17473 died... 08:55:26.437097 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17473): Terminated: ok {rc=0} 08:55:26.447280 --- ParallelTerminationStrategy: PID 17476 died... 08:55:26.502927 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17476): Terminated: ok {rc=0} 08:55:26.589216 bus /gobi_0: Setting Powered False 08:55:27.695418 bus /gobi_0: Setting Powered False 08:55:28.803154 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=17474): Process ended prematurely: osmo-stp_10.42.42.5(pid=17474) [trial-2357↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17474)]