Failed
gprs:oc2g.cs_paging_gprs_active.py (from gprs_oc2g)
Stacktrace
osmo-stp_10.42.42.5(pid=19097): Process ended prematurely: osmo-stp_10.42.42.5(pid=19097) [trial-2361↪gprs:oc2g↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19097)]
Standard Output
---------------------------------------------- trial-2361 gprs:oc2g cs_paging_gprs_active.py ---------------------------------------------- 15:50:30.820461 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 15:50:30.830998 tst gprs:oc2g: Using 1 x bts (candidates: 1) 15:50:30.973669 tst cs_paging_gprs_active.py: using LAC 22087 15:50:31.125984 tst cs_paging_gprs_active.py: using RAC 157 15:50:31.266237 tst cs_paging_gprs_active.py: using CellId 22087 15:50:31.401876 tst cs_paging_gprs_active.py: using BVCI 22088 15:50:31.429092 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 15:50:31.440995 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 15:50:31.453001 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 15:50:31.466327 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 15:50:31.478071 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 15:50:31.491828 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 15:50:31.504843 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 15:50:31.517154 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 15:50:31.529470 tst gprs:oc2g: Using 1 x modem (candidates: 4) 15:50:31.655610 tst gprs:oc2g: Using 1 x modem (candidates: 4) 15:50:31.960469 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 15:50:32.086604 run iperf3-srv_10.42.42.10: Starting iperf3-srv 15:50:32.399268 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19087): Launched 15:50:32.657859 run iperf3-srv_10.42.42.10(pid=19088): Launched 15:50:32.841079 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 15:50:32.965665 run iperf3-srv_10.42.42.10: Starting iperf3-srv 15:50:33.278384 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19089): Launched 15:50:33.538196 run iperf3-srv_10.42.42.10(pid=19090): Launched 15:50:33.721772 tst cs_paging_gprs_active.py:38: start network... 15:50:33.846785 run osmo-hlr_10.42.42.2: Starting osmo-hlr 15:50:34.326576 run create_hlr_db(pid=19091): Launched 15:50:34.499052 bus /sierra_2: Setting Powered False 15:50:35.520205 run create_hlr_db(pid=19091): Terminated: ok {rc=0} 15:50:35.920507 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19093): Launched 15:50:36.221236 run osmo-hlr_10.42.42.2(pid=19094): Launched 15:50:36.330251 run osmo-stp_10.42.42.5: Starting osmo-stp 15:50:36.849361 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19096): Launched 15:50:37.150096 run osmo-stp_10.42.42.5(pid=19097): Launched 15:50:37.258719 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 15:50:37.780420 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19099): Launched 15:50:37.886687 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 15:50:38.149536 run patchelf(pid=19100): Launched 15:50:38.324796 run osmo-stp_10.42.42.5(pid=19097): ERR: Terminated: ERROR {rc=1} [trial-2361↪gprs:oc2g↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19097)] 15:50:38.453247 run osmo-stp_10.42.42.5(pid=19097): stdout: | (launched: 2022-12-09_15:50:37.001871) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:50:38.582099 run osmo-stp_10.42.42.5(pid=19097): stderr: | �[0;m�[38;5;43m20221209155037173 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209155037173 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209155037173 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209155037174 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209155037174 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209155037174 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209155037174 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:50:38.705977 run osmo-stp_10.42.42.5(pid=19097): stdout: | (launched: 2022-12-09_15:50:37.001871) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:50:38.828408 run osmo-stp_10.42.42.5(pid=19097): stderr: | �[0;m�[38;5;43m20221209155037173 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209155037173 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209155037173 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209155037174 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209155037174 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209155037174 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209155037174 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:50:38.972224 run patchelf(pid=19100): Terminating (SIGINT) 15:50:39.142116 run patchelf(pid=19100): Terminated: ok {rc=0} 15:50:39.173540 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=19097): Process ended prematurely: osmo-stp_10.42.42.5(pid=19097) [trial-2361↪gprs:oc2g↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19097)] [trial-2361↪gprs:oc2g↪cs_paging_gprs_active.py:38] 15:50:39.182651 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 15:50:39.241764 run osmo-hlr_10.42.42.2(pid=19094): ERR: Terminated: ERROR {rc=237} [trial-2361↪gprs:oc2g↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=19094)] 15:50:39.290846 run osmo-hlr_10.42.42.2(pid=19094): stdout: | (launched: 2022-12-09_15:50:36.072915) 15:50:39.339959 run osmo-hlr_10.42.42.2(pid=19094): stderr: | �[0;m�[1;31m20221209155036253 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209155036253 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209155036253 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209155036253 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209155036253 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209155036253 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209155036266 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2361/run.2022-12-09_15-36-58/gprs:oc2g/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209155036274 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209155036274 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209155036274 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 15:50:39.381557 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19087): Terminating (SIGTERM) 15:50:39.420616 run iperf3-srv_10.42.42.10(pid=19088): Terminating (SIGTERM) 15:50:39.459527 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19089): Terminating (SIGTERM) 15:50:39.498256 run iperf3-srv_10.42.42.10(pid=19090): Terminating (SIGTERM) 15:50:39.537366 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19093): Terminating (SIGTERM) 15:50:39.576368 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19096): Terminating (SIGTERM) 15:50:39.615840 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19099): Terminating (SIGTERM) 15:50:39.624684 --- ParallelTerminationStrategy: PID 19087 died... 15:50:39.677348 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19087): Terminated: ok {rc=0} 15:50:39.686864 --- ParallelTerminationStrategy: PID 19088 died... 15:50:39.739333 run iperf3-srv_10.42.42.10(pid=19088): Terminated {rc=256} 15:50:39.749029 --- ParallelTerminationStrategy: PID 19089 died... 15:50:39.801738 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19089): Terminated: ok {rc=0} 15:50:39.811162 --- ParallelTerminationStrategy: PID 19090 died... 15:50:39.863701 run iperf3-srv_10.42.42.10(pid=19090): Terminated {rc=256} 15:50:39.873198 --- ParallelTerminationStrategy: PID 19093 died... 15:50:39.925416 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19093): Terminated: ok {rc=0} 15:50:39.934815 --- ParallelTerminationStrategy: PID 19096 died... 15:50:39.987072 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19096): Terminated: ok {rc=0} 15:50:39.996538 --- ParallelTerminationStrategy: PID 19099 died... 15:50:40.048807 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19099): Terminated: ok {rc=0} 15:50:40.130503 bus /gobi_0: Setting Powered False 15:50:41.235948 bus /gobi_0: Setting Powered False 15:50:42.340852 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=19097): Process ended prematurely: osmo-stp_10.42.42.5(pid=19097) [trial-2361↪gprs:oc2g↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19097)]