Failed
gprs:trx-b200.cs_paging_gprs_active.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=28011): Process ended prematurely: osmo-stp_10.42.42.5(pid=28011) [trial-2362↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28011)]
Standard Output
---------------------------------------------- trial-2362 gprs:trx-b200 cs_paging_gprs_active.py ---------------------------------------------- 17:32:32.583396 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 17:32:32.594026 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 17:32:32.731779 tst cs_paging_gprs_active.py: using LAC 22594 17:32:32.852516 tst cs_paging_gprs_active.py: using RAC 154 17:32:32.973867 tst cs_paging_gprs_active.py: using CellId 22594 17:32:33.092883 tst cs_paging_gprs_active.py: using BVCI 22595 17:32:33.116196 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 17:32:33.126796 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 17:32:33.137298 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 17:32:33.148342 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 17:32:33.159332 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 17:32:33.170253 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 17:32:33.181397 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 17:32:33.192436 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 17:32:33.203634 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 17:32:33.324264 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 17:32:33.622932 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 17:32:33.760319 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:32:34.100675 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27997): Launched 17:32:34.383670 run iperf3-srv_10.42.42.10(pid=27998): Launched 17:32:34.584240 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 17:32:34.720826 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:32:35.059722 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27999): Launched 17:32:35.341377 run iperf3-srv_10.42.42.10(pid=28000): Launched 17:32:35.541360 tst cs_paging_gprs_active.py:38: start network... 17:32:35.677276 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:32:36.201286 run create_hlr_db(pid=28005): Launched 17:32:36.390179 bus /sierra_2: Setting Powered False 17:32:37.410200 run create_hlr_db(pid=28005): Terminated: ok {rc=0} 17:32:37.822941 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28007): Launched 17:32:38.128700 run osmo-hlr_10.42.42.2(pid=28008): Launched 17:32:38.248833 run osmo-stp_10.42.42.5: Starting osmo-stp 17:32:38.787384 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28010): Launched 17:32:39.094391 run osmo-stp_10.42.42.5(pid=28011): Launched 17:32:39.206584 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:32:39.740209 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28013): Launched 17:32:39.849221 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:32:40.122024 run patchelf(pid=28014): Launched 17:32:40.302272 run osmo-stp_10.42.42.5(pid=28011): ERR: Terminated: ERROR {rc=1} [trial-2362↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28011)] 17:32:40.434020 run osmo-stp_10.42.42.5(pid=28011): stdout: | (launched: 2022-12-09_17:32:38.942456) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:32:40.565195 run osmo-stp_10.42.42.5(pid=28011): stderr: | �[0;m�[38;5;43m20221209173239113 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209173239113 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209173239113 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209173239113 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209173239114 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209173239114 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209173239114 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:32:40.691565 run osmo-stp_10.42.42.5(pid=28011): stdout: | (launched: 2022-12-09_17:32:38.942456) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:32:40.817513 run osmo-stp_10.42.42.5(pid=28011): stderr: | �[0;m�[38;5;43m20221209173239113 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209173239113 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209173239113 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209173239113 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209173239114 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209173239114 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209173239114 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:32:40.963990 run patchelf(pid=28014): Terminating (SIGINT) 17:32:41.136412 run patchelf(pid=28014): Terminated: ok {rc=0} 17:32:41.168201 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=28011): Process ended prematurely: osmo-stp_10.42.42.5(pid=28011) [trial-2362↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28011)] [trial-2362↪gprs:trx-b200↪cs_paging_gprs_active.py:38] 17:32:41.177691 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 17:32:41.238699 run osmo-hlr_10.42.42.2(pid=28008): ERR: Terminated: ERROR {rc=237} [trial-2362↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28008)] 17:32:41.288060 run osmo-hlr_10.42.42.2(pid=28008): stdout: | (launched: 2022-12-09_17:32:37.977790) 17:32:41.338136 run osmo-hlr_10.42.42.2(pid=28008): stderr: | �[0;m�[1;31m20221209173238153 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209173238153 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209173238154 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209173238154 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209173238154 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209173238154 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209173238166 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2362/run.2022-12-09_17-10-07/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209173238174 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209173238174 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209173238175 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:32:41.380465 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27997): Terminating (SIGTERM) 17:32:41.420652 run iperf3-srv_10.42.42.10(pid=27998): Terminating (SIGTERM) 17:32:41.461099 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27999): Terminating (SIGTERM) 17:32:41.500981 run iperf3-srv_10.42.42.10(pid=28000): Terminating (SIGTERM) 17:32:41.541710 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28007): Terminating (SIGTERM) 17:32:41.582508 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28010): Terminating (SIGTERM) 17:32:41.622902 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28013): Terminating (SIGTERM) 17:32:41.632409 --- ParallelTerminationStrategy: PID 27997 died... 17:32:41.687213 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27997): Terminated: ok {rc=0} 17:32:41.697071 --- ParallelTerminationStrategy: PID 27998 died... 17:32:41.750250 run iperf3-srv_10.42.42.10(pid=27998): Terminated {rc=256} 17:32:41.760212 --- ParallelTerminationStrategy: PID 27999 died... 17:32:41.813526 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27999): Terminated: ok {rc=0} 17:32:41.823605 --- ParallelTerminationStrategy: PID 28000 died... 17:32:41.877501 run iperf3-srv_10.42.42.10(pid=28000): Terminated {rc=256} 17:32:41.887423 --- ParallelTerminationStrategy: PID 28007 died... 17:32:41.941079 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28007): Terminated: ok {rc=0} 17:32:41.950772 --- ParallelTerminationStrategy: PID 28010 died... 17:32:42.004638 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28010): Terminated: ok {rc=0} 17:32:42.014567 --- ParallelTerminationStrategy: PID 28013 died... 17:32:42.068157 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28013): Terminated: ok {rc=0} 17:32:42.151933 bus /gobi_0: Setting Powered False 17:32:43.254770 bus /gobi_0: Setting Powered False 17:32:44.365297 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28011): Process ended prematurely: osmo-stp_10.42.42.5(pid=28011) [trial-2362↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28011)]