Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=8582): Process ended prematurely: osmo-stp_10.42.42.5(pid=8582) [trial-2363↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8582)]
Standard Output
---------------------------------------------- trial-2363 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py ---------------------------------------------- 19:50:12.609501 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:50:12.621507 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 19:50:12.760247 tst iperf3.py: using LAC 23322 19:50:12.884812 tst iperf3.py: using RAC 117 19:50:13.003971 tst iperf3.py: using CellId 23322 19:50:13.121824 tst iperf3.py: using BVCI 23323 19:50:13.144901 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:50:13.156291 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:50:13.167472 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:50:13.178620 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:50:13.189736 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:50:13.200753 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:50:13.211963 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:50:13.223087 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:50:13.234323 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 19:50:13.514270 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 19:50:13.640466 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:50:13.956441 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8574): Launched 19:50:14.217738 run iperf3-srv_10.42.42.10(pid=8575): Launched 19:50:14.403237 tst iperf3.py:8: start network... 19:50:14.529263 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:50:15.016103 run create_hlr_db(pid=8576): Launched 19:50:15.190702 bus /gobi_6: Setting Powered False 19:50:16.214160 run create_hlr_db(pid=8576): Terminated: ok {rc=0} 19:50:16.665277 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8578): Launched 19:50:17.099208 run osmo-hlr_10.42.42.2(pid=8579): Launched 19:50:17.244143 run osmo-stp_10.42.42.5: Starting osmo-stp 19:50:17.812346 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8581): Launched 19:50:18.138988 run osmo-stp_10.42.42.5(pid=8582): Launched 19:50:18.257353 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:50:18.824364 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8584): Launched 19:50:18.941124 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:50:19.225271 run patchelf(pid=8585): Launched 19:50:19.415451 run osmo-stp_10.42.42.5(pid=8582): ERR: Terminated: ERROR {rc=1} [trial-2363↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8582)] 19:50:19.554992 run osmo-stp_10.42.42.5(pid=8582): stdout: | (launched: 2022-12-09_19:50:17.978616) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:50:19.694863 run osmo-stp_10.42.42.5(pid=8582): stderr: | �[0;m�[38;5;43m20221209195018172 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209195018172 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209195018172 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209195018173 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209195018173 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209195018173 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209195018173 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:50:19.830083 run osmo-stp_10.42.42.5(pid=8582): stdout: | (launched: 2022-12-09_19:50:17.978616) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:50:19.964082 run osmo-stp_10.42.42.5(pid=8582): stderr: | �[0;m�[38;5;43m20221209195018172 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209195018172 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209195018172 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209195018173 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209195018173 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209195018173 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209195018173 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:50:20.119497 run patchelf(pid=8585): Terminating (SIGINT) 19:50:20.301493 run patchelf(pid=8585): Terminated: ok {rc=0} 19:50:20.334978 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=8582): Process ended prematurely: osmo-stp_10.42.42.5(pid=8582) [trial-2363↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8582)] [trial-2363↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8] 19:50:20.345054 tst iperf3.py:8: Test FAILED (7.8 sec) 19:50:20.407884 run osmo-hlr_10.42.42.2(pid=8579): ERR: Terminated: ERROR {rc=237} [trial-2363↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8579)] 19:50:20.458819 run osmo-hlr_10.42.42.2(pid=8579): stdout: | (launched: 2022-12-09_19:50:16.835117) 19:50:20.510461 run osmo-hlr_10.42.42.2(pid=8579): stderr: | �[0;m�[1;31m20221209195017142 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209195017142 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209195017142 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209195017142 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209195017143 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209195017143 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209195017162 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2363/run.2022-12-09_18-37-22/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209195017170 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209195017170 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209195017170 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:50:20.553956 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8574): Terminating (SIGTERM) 19:50:20.595441 run iperf3-srv_10.42.42.10(pid=8575): Terminating (SIGTERM) 19:50:20.636435 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8578): Terminating (SIGTERM) 19:50:20.677890 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8581): Terminating (SIGTERM) 19:50:20.718693 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8584): Terminating (SIGTERM) 19:50:20.728328 --- ParallelTerminationStrategy: PID 8574 died... 19:50:20.783744 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8574): Terminated: ok {rc=0} 19:50:20.793691 --- ParallelTerminationStrategy: PID 8575 died... 19:50:20.849178 run iperf3-srv_10.42.42.10(pid=8575): Terminated {rc=256} 19:50:20.859009 --- ParallelTerminationStrategy: PID 8578 died... 19:50:20.914409 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8578): Terminated: ok {rc=0} 19:50:20.924337 --- ParallelTerminationStrategy: PID 8581 died... 19:50:20.979949 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8581): Terminated: ok {rc=0} 19:50:20.989985 --- ParallelTerminationStrategy: PID 8584 died... 19:50:21.045485 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8584): Terminated: ok {rc=0} 19:50:21.132232 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8582): Process ended prematurely: osmo-stp_10.42.42.5(pid=8582) [trial-2363↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8582)]