Failed
gprs:sysmo+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=2425): Process ended prematurely: osmo-stp_10.42.42.5(pid=2425) [trial-2363↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2425)]
Standard Output
---------------------------------------------- trial-2363 gprs:sysmo+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 18:45:06.529606 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:45:06.540743 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 18:45:06.692850 tst cs_paging_gprs_active.py: using LAC 22977 18:45:06.818401 tst cs_paging_gprs_active.py: using RAC 27 18:45:06.944791 tst cs_paging_gprs_active.py: using CellId 22977 18:45:07.071679 tst cs_paging_gprs_active.py: using BVCI 22978 18:45:07.096436 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:45:07.107474 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:45:07.118810 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:45:07.130613 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:45:07.143165 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:45:07.154183 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:45:07.166977 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:45:07.178770 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:45:07.190057 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 18:45:07.311630 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 18:45:07.604555 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 18:45:07.739891 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:45:08.071080 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2415): Launched 18:45:08.346434 run iperf3-srv_10.42.42.10(pid=2416): Launched 18:45:08.543516 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 18:45:08.677813 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:45:09.009749 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2417): Launched 18:45:09.285230 run iperf3-srv_10.42.42.10(pid=2418): Launched 18:45:09.482823 tst cs_paging_gprs_active.py:38: start network... 18:45:09.617264 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:45:10.122574 run create_hlr_db(pid=2419): Launched 18:45:10.309119 bus /gobi_6: Setting Powered False 18:45:11.330112 run create_hlr_db(pid=2419): Terminated: ok {rc=0} 18:45:11.733607 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2421): Launched 18:45:12.034940 run osmo-hlr_10.42.42.2(pid=2422): Launched 18:45:12.152310 run osmo-stp_10.42.42.5: Starting osmo-stp 18:45:12.680837 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2424): Launched 18:45:12.982015 run osmo-stp_10.42.42.5(pid=2425): Launched 18:45:13.090746 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:45:13.612841 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2427): Launched 18:45:13.719719 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:45:13.981733 run patchelf(pid=2428): Launched 18:45:14.157503 run osmo-stp_10.42.42.5(pid=2425): ERR: Terminated: ERROR {rc=1} [trial-2363↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2425)] 18:45:14.285769 run osmo-stp_10.42.42.5(pid=2425): stdout: | (launched: 2022-12-09_18:45:12.833311) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:45:14.413941 run osmo-stp_10.42.42.5(pid=2425): stderr: | �[0;m�[38;5;43m20221209184513004 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209184513004 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209184513005 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209184513005 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209184513006 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209184513006 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209184513006 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:45:14.537690 run osmo-stp_10.42.42.5(pid=2425): stdout: | (launched: 2022-12-09_18:45:12.833311) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:45:14.659953 run osmo-stp_10.42.42.5(pid=2425): stderr: | �[0;m�[38;5;43m20221209184513004 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209184513004 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209184513005 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209184513005 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209184513006 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209184513006 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209184513006 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:45:14.803800 run patchelf(pid=2428): Terminating (SIGINT) 18:45:14.972591 run patchelf(pid=2428): Terminated: ok {rc=0} 18:45:15.003464 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=2425): Process ended prematurely: osmo-stp_10.42.42.5(pid=2425) [trial-2363↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2425)] [trial-2363↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 18:45:15.012605 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 18:45:15.071189 run osmo-hlr_10.42.42.2(pid=2422): ERR: Terminated: ERROR {rc=237} [trial-2363↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2422)] 18:45:15.119056 run osmo-hlr_10.42.42.2(pid=2422): stdout: | (launched: 2022-12-09_18:45:11.886659) 18:45:15.167594 run osmo-hlr_10.42.42.2(pid=2422): stderr: | �[0;m�[1;31m20221209184512065 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209184512065 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209184512065 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209184512065 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209184512065 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209184512065 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209184512078 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2363/run.2022-12-09_18-37-22/gprs:sysmo+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209184512086 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209184512087 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209184512087 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:45:15.209126 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2415): Terminating (SIGTERM) 18:45:15.248109 run iperf3-srv_10.42.42.10(pid=2416): Terminating (SIGTERM) 18:45:15.286970 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2417): Terminating (SIGTERM) 18:45:15.325839 run iperf3-srv_10.42.42.10(pid=2418): Terminating (SIGTERM) 18:45:15.365006 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2421): Terminating (SIGTERM) 18:45:15.403711 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2424): Terminating (SIGTERM) 18:45:15.442510 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2427): Terminating (SIGTERM) 18:45:15.451558 --- ParallelTerminationStrategy: PID 2415 died... 18:45:15.504404 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2415): Terminated: ok {rc=0} 18:45:15.513895 --- ParallelTerminationStrategy: PID 2416 died... 18:45:15.565592 run iperf3-srv_10.42.42.10(pid=2416): Terminated {rc=256} 18:45:15.575250 --- ParallelTerminationStrategy: PID 2417 died... 18:45:15.627143 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2417): Terminated: ok {rc=0} 18:45:15.636502 --- ParallelTerminationStrategy: PID 2418 died... 18:45:15.687900 run iperf3-srv_10.42.42.10(pid=2418): Terminated {rc=256} 18:45:15.697398 --- ParallelTerminationStrategy: PID 2421 died... 18:45:15.753550 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2421): Terminated: ok {rc=0} 18:45:15.763693 --- ParallelTerminationStrategy: PID 2424 died... 18:45:15.819022 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2424): Terminated: ok {rc=0} 18:45:15.834303 --- ParallelTerminationStrategy: PID 2427 died... 18:45:15.895293 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2427): Terminated: ok {rc=0} 18:45:15.986007 bus /gobi_0: Setting Powered False 18:45:17.106155 bus /gobi_0: Setting Powered False 18:45:18.214849 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=2425): Process ended prematurely: osmo-stp_10.42.42.5(pid=2425) [trial-2363↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2425)]