Failed
gprs:sysmo+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=10485): Process ended prematurely: osmo-stp_10.42.42.5(pid=10485) [trial-2364↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10485)]
Standard Output
---------------------------------------------- trial-2364 gprs:sysmo+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 20:13:37.676103 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:13:37.686912 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 20:13:37.832669 tst cs_paging_gprs_active.py: using LAC 23443 20:13:37.953223 tst cs_paging_gprs_active.py: using RAC 238 20:13:38.080765 tst cs_paging_gprs_active.py: using CellId 23443 20:13:38.209426 tst cs_paging_gprs_active.py: using BVCI 23444 20:13:38.234728 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:13:38.246250 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:13:38.257463 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:13:38.268830 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:13:38.279929 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:13:38.291293 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:13:38.302645 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:13:38.313756 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:13:38.325122 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 20:13:38.442413 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 20:13:38.740622 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:13:38.877798 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:13:39.212275 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10475): Launched 20:13:39.474422 run iperf3-srv_10.42.42.10(pid=10476): Launched 20:13:39.660884 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:13:39.788210 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:13:40.103212 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10477): Launched 20:13:40.364645 run iperf3-srv_10.42.42.10(pid=10478): Launched 20:13:40.551125 tst cs_paging_gprs_active.py:38: start network... 20:13:40.678581 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:13:41.160751 run create_hlr_db(pid=10479): Launched 20:13:41.336708 bus /gobi_6: Setting Powered False 20:13:42.359300 run create_hlr_db(pid=10479): Terminated: ok {rc=0} 20:13:42.764043 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10481): Launched 20:13:43.070287 run osmo-hlr_10.42.42.2(pid=10482): Launched 20:13:43.190463 run osmo-stp_10.42.42.5: Starting osmo-stp 20:13:43.726148 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10484): Launched 20:13:44.031521 run osmo-stp_10.42.42.5(pid=10485): Launched 20:13:44.143522 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:13:44.674455 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10487): Launched 20:13:44.783229 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:13:45.050174 run patchelf(pid=10488): Launched 20:13:45.229369 run osmo-stp_10.42.42.5(pid=10485): ERR: Terminated: ERROR {rc=1} [trial-2364↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10485)] 20:13:45.360080 run osmo-stp_10.42.42.5(pid=10485): stdout: | (launched: 2022-12-09_20:13:43.881136) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:13:45.490889 run osmo-stp_10.42.42.5(pid=10485): stderr: | �[0;m�[38;5;43m20221209201344048 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209201344048 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209201344048 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209201344049 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209201344049 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209201344049 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209201344049 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:13:45.617117 run osmo-stp_10.42.42.5(pid=10485): stdout: | (launched: 2022-12-09_20:13:43.881136) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:13:45.742468 run osmo-stp_10.42.42.5(pid=10485): stderr: | �[0;m�[38;5;43m20221209201344048 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209201344048 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209201344048 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209201344049 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209201344049 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209201344049 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209201344049 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:13:45.890355 run patchelf(pid=10488): Terminating (SIGINT) 20:13:46.066451 run patchelf(pid=10488): Terminated: ok {rc=0} 20:13:46.099489 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=10485): Process ended prematurely: osmo-stp_10.42.42.5(pid=10485) [trial-2364↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10485)] [trial-2364↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 20:13:46.109880 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 20:13:46.174502 run osmo-hlr_10.42.42.2(pid=10482): ERR: Terminated: ERROR {rc=237} [trial-2364↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10482)] 20:13:46.225851 run osmo-hlr_10.42.42.2(pid=10482): stdout: | (launched: 2022-12-09_20:13:42.919566) 20:13:46.278118 run osmo-hlr_10.42.42.2(pid=10482): stderr: | �[0;m�[1;31m20221209201343094 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209201343094 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209201343094 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209201343094 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209201343094 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209201343094 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209201343106 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2364/run.2022-12-09_20-04-44/gprs:sysmo+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209201343117 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209201343117 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209201343117 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:13:46.321420 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10475): Terminating (SIGTERM) 20:13:46.363268 run iperf3-srv_10.42.42.10(pid=10476): Terminating (SIGTERM) 20:13:46.406396 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10477): Terminating (SIGTERM) 20:13:46.450389 run iperf3-srv_10.42.42.10(pid=10478): Terminating (SIGTERM) 20:13:46.493421 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10481): Terminating (SIGTERM) 20:13:46.536362 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10484): Terminating (SIGTERM) 20:13:46.577545 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10487): Terminating (SIGTERM) 20:13:46.588290 --- ParallelTerminationStrategy: PID 10475 died... 20:13:46.644422 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10475): Terminated: ok {rc=0} 20:13:46.654996 --- ParallelTerminationStrategy: PID 10476 died... 20:13:46.710989 run iperf3-srv_10.42.42.10(pid=10476): Terminated {rc=256} 20:13:46.721399 --- ParallelTerminationStrategy: PID 10477 died... 20:13:46.777156 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10477): Terminated: ok {rc=0} 20:13:46.787571 --- ParallelTerminationStrategy: PID 10478 died... 20:13:46.843631 run iperf3-srv_10.42.42.10(pid=10478): Terminated {rc=256} 20:13:46.853970 --- ParallelTerminationStrategy: PID 10481 died... 20:13:46.909963 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10481): Terminated: ok {rc=0} 20:13:46.920582 --- ParallelTerminationStrategy: PID 10484 died... 20:13:46.976699 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10484): Terminated: ok {rc=0} 20:13:46.987185 --- ParallelTerminationStrategy: PID 10487 died... 20:13:47.043358 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10487): Terminated: ok {rc=0} 20:13:47.139998 bus /gobi_0: Setting Powered False 20:13:48.241013 bus /gobi_0: Setting Powered False 20:13:49.345890 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10485): Process ended prematurely: osmo-stp_10.42.42.5(pid=10485) [trial-2364↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10485)]