Failed
dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any.switch_tch_pdch.py (from dynts_trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any)
Stacktrace
osmo-stp_10.42.42.5(pid=15747): Process ended prematurely: osmo-stp_10.42.42.5(pid=15747) [trial-2368↪dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15747)]
Standard Output
---------------------------------------------- trial-2368 dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any switch_tch_pdch.py ---------------------------------------------- 02:51:47.096189 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 02:51:47.112585 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x bts (candidates: 1) 02:51:47.287379 tst switch_tch_pdch.py: using LAC 25476 02:51:47.409815 tst switch_tch_pdch.py: using RAC 231 02:51:47.532227 tst switch_tch_pdch.py: using CellId 25476 02:51:47.655805 tst switch_tch_pdch.py: using BVCI 25477 02:51:47.680177 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 02:51:47.691884 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 02:51:47.703492 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 02:51:47.715213 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 02:51:47.726636 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 02:51:47.737988 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 02:51:47.749548 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 02:51:47.761024 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 02:51:47.878170 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 02:51:48.151233 tst switch_tch_pdch.py:51: start network... 02:51:48.273699 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:51:48.738885 run create_hlr_db(pid=15741): Launched 02:51:48.909406 bus /gobi_6: Setting Powered False 02:51:49.929824 run create_hlr_db(pid=15741): Terminated: ok {rc=0} 02:51:50.324735 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15743): Launched 02:51:50.620281 run osmo-hlr_10.42.42.2(pid=15744): Launched 02:51:50.734351 run osmo-stp_10.42.42.5: Starting osmo-stp 02:51:51.257772 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15746): Launched 02:51:51.554747 run osmo-stp_10.42.42.5(pid=15747): Launched 02:51:51.663476 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:51:52.180853 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15749): Launched 02:51:52.285807 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:51:52.544399 run patchelf(pid=15750): Launched 02:51:52.718724 run osmo-stp_10.42.42.5(pid=15747): ERR: Terminated: ERROR {rc=1} [trial-2368↪dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15747)] 02:51:52.845781 run osmo-stp_10.42.42.5(pid=15747): stdout: | (launched: 2022-12-10_02:51:51.407842) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:51:52.973400 run osmo-stp_10.42.42.5(pid=15747): stderr: | �[0;m�[38;5;43m20221210025151580 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210025151580 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210025151580 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210025151581 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210025151581 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210025151581 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210025151581 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:51:53.096210 run osmo-stp_10.42.42.5(pid=15747): stdout: | (launched: 2022-12-10_02:51:51.407842) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:51:53.217925 run osmo-stp_10.42.42.5(pid=15747): stderr: | �[0;m�[38;5;43m20221210025151580 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210025151580 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210025151580 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210025151581 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210025151581 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210025151581 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210025151581 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:51:53.359557 run patchelf(pid=15750): Terminating (SIGINT) 02:51:53.525993 run patchelf(pid=15750): Terminated: ok {rc=0} 02:51:53.556488 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=15747): Process ended prematurely: osmo-stp_10.42.42.5(pid=15747) [trial-2368↪dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15747)] [trial-2368↪dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54] 02:51:53.565101 tst switch_tch_pdch.py:54: Test FAILED (6.5 sec) 02:51:53.625322 run osmo-hlr_10.42.42.2(pid=15744): ERR: Terminated: ERROR {rc=237} [trial-2368↪dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15744)] 02:51:53.674168 run osmo-hlr_10.42.42.2(pid=15744): stdout: | (launched: 2022-12-10_02:51:50.474224) 02:51:53.724250 run osmo-hlr_10.42.42.2(pid=15744): stderr: | �[0;m�[1;31m20221210025150650 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210025150650 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210025150650 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210025150650 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210025150650 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210025150651 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210025150662 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2368/run.2022-12-10_02-07-09/dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210025150670 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210025150670 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210025150670 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:51:53.766288 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15743): Terminating (SIGTERM) 02:51:53.806189 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15746): Terminating (SIGTERM) 02:51:53.846025 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15749): Terminating (SIGTERM) 02:51:53.855311 --- ParallelTerminationStrategy: PID 15743 died... 02:51:53.909127 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15743): Terminated: ok {rc=0} 02:51:53.918626 --- ParallelTerminationStrategy: PID 15746 died... 02:51:53.971851 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15746): Terminated: ok {rc=0} 02:51:53.981557 --- ParallelTerminationStrategy: PID 15749 died... 02:51:54.034340 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15749): Terminated: ok {rc=0} 02:51:54.121473 bus /gobi_0: Setting Powered False 02:51:55.225462 bus /gobi_0: Setting Powered False 02:51:56.337454 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15747): Process ended prematurely: osmo-stp_10.42.42.5(pid=15747) [trial-2368↪dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15747)]