Failed
gprs:nanobts+band-1900.ping_idle_ping.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=18253): Process ended prematurely: osmo-stp_10.42.42.5(pid=18253) [trial-2368↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18253)]
Standard Output
---------------------------------------------- trial-2368 gprs:nanobts+band-1900 ping_idle_ping.py ---------------------------------------------- 03:11:32.985449 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:11:32.997433 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 03:11:33.130868 tst ping_idle_ping.py: using LAC 25582 03:11:33.255124 tst ping_idle_ping.py: using RAC 82 03:11:33.379577 tst ping_idle_ping.py: using CellId 25582 03:11:33.504374 tst ping_idle_ping.py: using BVCI 25583 03:11:33.528677 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:11:33.539713 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:11:33.550740 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:11:33.561764 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:11:33.572570 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:11:33.583507 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:11:33.594632 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:11:33.605662 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 03:11:33.895391 tst ping_idle_ping.py:24: start network... 03:11:34.028839 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:11:34.538350 run create_hlr_db(pid=18247): Launched 03:11:34.722403 bus /gobi_6: Setting Powered False 03:11:35.731889 run create_hlr_db(pid=18247): Terminated: ok {rc=0} 03:11:36.137848 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18249): Launched 03:11:36.434426 run osmo-hlr_10.42.42.2(pid=18250): Launched 03:11:36.550141 run osmo-stp_10.42.42.5: Starting osmo-stp 03:11:37.074114 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18252): Launched 03:11:37.370558 run osmo-stp_10.42.42.5(pid=18253): Launched 03:11:37.478802 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:11:37.997151 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18255): Launched 03:11:38.103358 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:11:38.363425 run patchelf(pid=18256): Launched 03:11:38.539153 run osmo-stp_10.42.42.5(pid=18253): ERR: Terminated: ERROR {rc=1} [trial-2368↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18253)] 03:11:38.667057 run osmo-stp_10.42.42.5(pid=18253): stdout: | (launched: 2022-12-10_03:11:37.224472) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:11:38.795066 run osmo-stp_10.42.42.5(pid=18253): stderr: | �[0;m�[38;5;43m20221210031137395 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210031137395 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210031137395 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210031137395 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210031137396 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210031137396 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210031137396 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:11:38.918440 run osmo-stp_10.42.42.5(pid=18253): stdout: | (launched: 2022-12-10_03:11:37.224472) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:11:39.040814 run osmo-stp_10.42.42.5(pid=18253): stderr: | �[0;m�[38;5;43m20221210031137395 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210031137395 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210031137395 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210031137395 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210031137396 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210031137396 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210031137396 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:11:39.182977 run patchelf(pid=18256): Terminating (SIGINT) 03:11:39.350135 run patchelf(pid=18256): Terminated: ok {rc=0} 03:11:39.380248 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=18253): Process ended prematurely: osmo-stp_10.42.42.5(pid=18253) [trial-2368↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18253)] [trial-2368↪gprs:nanobts+band-1900↪ping_idle_ping.py:27] 03:11:39.388674 tst ping_idle_ping.py:27: Test FAILED (6.4 sec) 03:11:39.449318 run osmo-hlr_10.42.42.2(pid=18250): ERR: Terminated: ERROR {rc=237} [trial-2368↪gprs:nanobts+band-1900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18250)] 03:11:39.499167 run osmo-hlr_10.42.42.2(pid=18250): stdout: | (launched: 2022-12-10_03:11:36.288044) 03:11:39.549186 run osmo-hlr_10.42.42.2(pid=18250): stderr: | �[0;m�[1;31m20221210031136463 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210031136463 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210031136463 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210031136463 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210031136463 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210031136463 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210031136476 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2368/run.2022-12-10_02-07-09/gprs:nanobts+band-1900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210031136487 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210031136488 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210031136488 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:11:39.591329 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18249): Terminating (SIGTERM) 03:11:39.631216 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18252): Terminating (SIGTERM) 03:11:39.671337 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18255): Terminating (SIGTERM) 03:11:39.680896 --- ParallelTerminationStrategy: PID 18249 died... 03:11:39.734768 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18249): Terminated: ok {rc=0} 03:11:39.744501 --- ParallelTerminationStrategy: PID 18252 died... 03:11:39.797869 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18252): Terminated: ok {rc=0} 03:11:39.807721 --- ParallelTerminationStrategy: PID 18255 died... 03:11:39.861058 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18255): Terminated: ok {rc=0} 03:11:39.950224 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18253): Process ended prematurely: osmo-stp_10.42.42.5(pid=18253) [trial-2368↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18253)]