Failed
gprs:oc2g+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=13204): Process ended prematurely: osmo-stp_10.42.42.5(pid=13204) [trial-2368↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13204)]
Standard Output
---------------------------------------------- trial-2368 gprs:oc2g+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 02:23:01.640765 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:23:01.653990 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 02:23:01.841145 tst cs_paging_gprs_active.py: using LAC 25324 02:23:01.970363 tst cs_paging_gprs_active.py: using RAC 79 02:23:02.090203 tst cs_paging_gprs_active.py: using CellId 25324 02:23:02.214280 tst cs_paging_gprs_active.py: using BVCI 25325 02:23:02.238173 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:23:02.249373 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:23:02.260392 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:23:02.272184 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:23:02.284023 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:23:02.296615 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:23:02.307934 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:23:02.319670 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:23:02.331503 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 02:23:02.449776 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 02:23:02.743047 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:23:02.878270 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:23:03.212799 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13194): Launched 02:23:03.491807 run iperf3-srv_10.42.42.10(pid=13195): Launched 02:23:03.690356 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:23:03.825882 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:23:04.160302 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13196): Launched 02:23:04.439355 run iperf3-srv_10.42.42.10(pid=13197): Launched 02:23:04.638620 tst cs_paging_gprs_active.py:38: start network... 02:23:04.774009 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:23:05.293468 run create_hlr_db(pid=13198): Launched 02:23:05.479858 bus /gobi_6: Setting Powered False 02:23:06.502683 run create_hlr_db(pid=13198): Terminated: ok {rc=0} 02:23:06.931935 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13200): Launched 02:23:07.256168 run osmo-hlr_10.42.42.2(pid=13201): Launched 02:23:07.375293 run osmo-stp_10.42.42.5: Starting osmo-stp 02:23:07.935524 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13203): Launched 02:23:08.259174 run osmo-stp_10.42.42.5(pid=13204): Launched 02:23:08.377573 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:23:08.942836 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13206): Launched 02:23:09.058786 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:23:09.340841 run patchelf(pid=13207): Launched 02:23:09.531053 run osmo-stp_10.42.42.5(pid=13204): ERR: Terminated: ERROR {rc=1} [trial-2368↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13204)] 02:23:09.669737 run osmo-stp_10.42.42.5(pid=13204): stdout: | (launched: 2022-12-10_02:23:08.100177) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:23:09.808158 run osmo-stp_10.42.42.5(pid=13204): stderr: | �[0;m�[38;5;43m20221210022308292 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210022308292 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210022308292 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210022308292 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210022308295 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210022308295 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210022308295 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:23:09.942128 run osmo-stp_10.42.42.5(pid=13204): stdout: | (launched: 2022-12-10_02:23:08.100177) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:23:10.075038 run osmo-stp_10.42.42.5(pid=13204): stderr: | �[0;m�[38;5;43m20221210022308292 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210022308292 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210022308292 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210022308292 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210022308295 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210022308295 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210022308295 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:23:10.229700 run patchelf(pid=13207): Terminating (SIGINT) 02:23:10.411569 run patchelf(pid=13207): Terminated: ok {rc=0} 02:23:10.444730 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=13204): Process ended prematurely: osmo-stp_10.42.42.5(pid=13204) [trial-2368↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13204)] [trial-2368↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 02:23:10.454397 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 02:23:10.517869 run osmo-hlr_10.42.42.2(pid=13201): ERR: Terminated: ERROR {rc=237} [trial-2368↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13201)] 02:23:10.569448 run osmo-hlr_10.42.42.2(pid=13201): stdout: | (launched: 2022-12-10_02:23:07.097210) 02:23:10.621706 run osmo-hlr_10.42.42.2(pid=13201): stderr: | �[0;m�[1;31m20221210022307297 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210022307297 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210022307298 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210022307298 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210022307298 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210022307298 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210022307311 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2368/run.2022-12-10_02-07-09/gprs:oc2g+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210022307321 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210022307321 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210022307321 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:23:10.666083 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13194): Terminating (SIGTERM) 02:23:10.707835 run iperf3-srv_10.42.42.10(pid=13195): Terminating (SIGTERM) 02:23:10.749853 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13196): Terminating (SIGTERM) 02:23:10.791456 run iperf3-srv_10.42.42.10(pid=13197): Terminating (SIGTERM) 02:23:10.833525 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13200): Terminating (SIGTERM) 02:23:10.875277 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13203): Terminating (SIGTERM) 02:23:10.916918 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13206): Terminating (SIGTERM) 02:23:10.926611 --- ParallelTerminationStrategy: PID 13194 died... 02:23:10.982964 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13194): Terminated: ok {rc=0} 02:23:10.992868 --- ParallelTerminationStrategy: PID 13195 died... 02:23:11.048303 run iperf3-srv_10.42.42.10(pid=13195): Terminated {rc=256} 02:23:11.058259 --- ParallelTerminationStrategy: PID 13196 died... 02:23:11.113584 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13196): Terminated: ok {rc=0} 02:23:11.123523 --- ParallelTerminationStrategy: PID 13197 died... 02:23:11.179612 run iperf3-srv_10.42.42.10(pid=13197): Terminated {rc=256} 02:23:11.189624 --- ParallelTerminationStrategy: PID 13200 died... 02:23:11.245248 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13200): Terminated: ok {rc=0} 02:23:11.255201 --- ParallelTerminationStrategy: PID 13203 died... 02:23:11.310763 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13203): Terminated: ok {rc=0} 02:23:11.320586 --- ParallelTerminationStrategy: PID 13206 died... 02:23:11.375963 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13206): Terminated: ok {rc=0} 02:23:11.462583 bus /gobi_0: Setting Powered False 02:23:12.565528 bus /gobi_0: Setting Powered False 02:23:13.677334 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13204): Process ended prematurely: osmo-stp_10.42.42.5(pid=13204) [trial-2368↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13204)]