Failed
gprs:trx-umtrx+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=15611): Process ended prematurely: osmo-stp_10.42.42.5(pid=15611) [trial-2368↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15611)]
Standard Output
---------------------------------------------- trial-2368 gprs:trx-umtrx+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 02:49:47.020525 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:49:47.032452 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 02:49:47.224845 tst cs_paging_gprs_active.py: using LAC 25466 02:49:47.357035 tst cs_paging_gprs_active.py: using RAC 221 02:49:47.485226 tst cs_paging_gprs_active.py: using CellId 25466 02:49:47.611451 tst cs_paging_gprs_active.py: using BVCI 25467 02:49:47.636500 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:49:47.648054 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:49:47.659405 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:49:47.670931 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:49:47.682311 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:49:47.693654 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:49:47.705127 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:49:47.716252 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:49:47.727743 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 02:49:47.845313 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 02:49:48.127751 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:49:48.253697 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:49:48.567748 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15601): Launched 02:49:48.829967 run iperf3-srv_10.42.42.10(pid=15602): Launched 02:49:49.014158 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:49:49.140059 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:49:49.452925 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15603): Launched 02:49:49.714085 run iperf3-srv_10.42.42.10(pid=15604): Launched 02:49:49.898280 tst cs_paging_gprs_active.py:38: start network... 02:49:50.024702 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:49:50.503223 run create_hlr_db(pid=15605): Launched 02:49:50.677058 bus /gobi_6: Setting Powered False 02:49:51.699406 run create_hlr_db(pid=15605): Terminated: ok {rc=0} 02:49:52.130828 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15607): Launched 02:49:52.456361 run osmo-hlr_10.42.42.2(pid=15608): Launched 02:49:52.576367 run osmo-stp_10.42.42.5: Starting osmo-stp 02:49:53.139526 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15610): Launched 02:49:53.463344 run osmo-stp_10.42.42.5(pid=15611): Launched 02:49:53.580797 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:49:54.144302 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15613): Launched 02:49:54.259848 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:49:54.543518 run patchelf(pid=15614): Launched 02:49:54.731956 run osmo-stp_10.42.42.5(pid=15611): ERR: Terminated: ERROR {rc=1} [trial-2368↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15611)] 02:49:54.870090 run osmo-stp_10.42.42.5(pid=15611): stdout: | (launched: 2022-12-10_02:49:53.304148) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:49:55.007879 run osmo-stp_10.42.42.5(pid=15611): stderr: | �[0;m�[38;5;43m20221210024953496 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210024953497 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210024953497 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210024953497 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210024953498 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210024953498 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210024953498 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:49:55.141875 run osmo-stp_10.42.42.5(pid=15611): stdout: | (launched: 2022-12-10_02:49:53.304148) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:49:55.274746 run osmo-stp_10.42.42.5(pid=15611): stderr: | �[0;m�[38;5;43m20221210024953496 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210024953497 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210024953497 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210024953497 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210024953498 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210024953498 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210024953498 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:49:55.429333 run patchelf(pid=15614): Terminating (SIGINT) 02:49:55.610267 run patchelf(pid=15614): Terminated: ok {rc=0} 02:49:55.643516 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=15611): Process ended prematurely: osmo-stp_10.42.42.5(pid=15611) [trial-2368↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15611)] [trial-2368↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 02:49:55.653211 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 02:49:55.716462 run osmo-hlr_10.42.42.2(pid=15608): ERR: Terminated: ERROR {rc=237} [trial-2368↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15608)] 02:49:55.767790 run osmo-hlr_10.42.42.2(pid=15608): stdout: | (launched: 2022-12-10_02:49:52.295525) 02:49:55.819528 run osmo-hlr_10.42.42.2(pid=15608): stderr: | �[0;m�[1;31m20221210024952492 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210024952492 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210024952492 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210024952492 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210024952492 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210024952492 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210024952506 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2368/run.2022-12-10_02-07-09/gprs:trx-umtrx+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210024952515 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210024952515 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210024952515 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:49:55.863632 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15601): Terminating (SIGTERM) 02:49:55.905390 run iperf3-srv_10.42.42.10(pid=15602): Terminating (SIGTERM) 02:49:55.947247 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15603): Terminating (SIGTERM) 02:49:55.988877 run iperf3-srv_10.42.42.10(pid=15604): Terminating (SIGTERM) 02:49:56.030735 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15607): Terminating (SIGTERM) 02:49:56.072601 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15610): Terminating (SIGTERM) 02:49:56.114614 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15613): Terminating (SIGTERM) 02:49:56.124275 --- ParallelTerminationStrategy: PID 15601 died... 02:49:56.179971 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15601): Terminated: ok {rc=0} 02:49:56.190155 --- ParallelTerminationStrategy: PID 15602 died... 02:49:56.245559 run iperf3-srv_10.42.42.10(pid=15602): Terminated {rc=256} 02:49:56.255688 --- ParallelTerminationStrategy: PID 15603 died... 02:49:56.311397 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15603): Terminated: ok {rc=0} 02:49:56.321622 --- ParallelTerminationStrategy: PID 15604 died... 02:49:56.377054 run iperf3-srv_10.42.42.10(pid=15604): Terminated {rc=256} 02:49:56.387238 --- ParallelTerminationStrategy: PID 15607 died... 02:49:56.442818 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15607): Terminated: ok {rc=0} 02:49:56.452873 --- ParallelTerminationStrategy: PID 15610 died... 02:49:56.508470 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15610): Terminated: ok {rc=0} 02:49:56.518756 --- ParallelTerminationStrategy: PID 15613 died... 02:49:56.574354 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15613): Terminated: ok {rc=0} 02:49:56.662281 bus /gobi_0: Setting Powered False 02:49:57.769090 bus /gobi_0: Setting Powered False 02:49:58.879183 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15611): Process ended prematurely: osmo-stp_10.42.42.5(pid=15611) [trial-2368↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15611)]