Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-lms-limenet-micro.ping.py (from gprs_trx-lms-limenet-micro)

Failing for the past 235 builds (Since #2139 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=30442): Process ended prematurely: osmo-stp_10.42.42.5(pid=30442) [trial-2373↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30442)]

Standard Output

----------------------------------------------
trial-2373 gprs:trx-lms-limenet-micro ping.py
----------------------------------------------
10:45:04.198696 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
10:45:04.210569 tst       gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1)
10:45:04.349273 tst                          ping.py: using LAC 27848
10:45:04.469207 tst                          ping.py: using RAC 53
10:45:04.585747 tst                          ping.py: using CellId 27848
10:45:04.701963 tst                          ping.py: using BVCI 27849
10:45:04.724332 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
10:45:04.735149 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
10:45:04.745800 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
10:45:04.756438 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
10:45:04.767015 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
10:45:04.778042 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
10:45:04.788696 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
10:45:04.799217 tst       gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4)
10:45:05.069989 tst                       ping.py:19: start network...
10:45:05.191658 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
10:45:05.663136 run         create_hlr_db(pid=30436): Launched
10:45:05.833719 bus                          /gobi_6: Setting Powered False
10:45:06.855234 run         create_hlr_db(pid=30436): Terminated: ok {rc=0}
10:45:07.249311 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30438): Launched
10:45:07.545142 run   osmo-hlr_10.42.42.2(pid=30439): Launched
10:45:07.652094 run              osmo-stp_10.42.42.5: Starting osmo-stp
10:45:08.165836 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30441): Launched
10:45:08.460369 run   osmo-stp_10.42.42.5(pid=30442): Launched
10:45:08.567665 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
10:45:09.082056 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30444): Launched
10:45:09.186267 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
10:45:09.442835 run              patchelf(pid=30445): Launched
10:45:09.615030 run   osmo-stp_10.42.42.5(pid=30442): ERR: Terminated: ERROR {rc=1}  [trial-2373↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30442)]
10:45:09.741333 run   osmo-stp_10.42.42.5(pid=30442): stdout: 
| (launched: 2022-12-10_10:45:08.315270)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:45:09.868114 run   osmo-stp_10.42.42.5(pid=30442): stderr: 
| �[0;m�[38;5;43m20221210104508487 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210104508487 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210104508487 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210104508488 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210104508488 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210104508488 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210104508488 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:45:09.990076 run   osmo-stp_10.42.42.5(pid=30442): stdout: 
| (launched: 2022-12-10_10:45:08.315270)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:45:10.111401 run   osmo-stp_10.42.42.5(pid=30442): stderr: 
| �[0;m�[38;5;43m20221210104508487 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210104508487 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210104508487 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210104508488 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210104508488 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210104508488 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210104508488 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:45:10.252599 run              patchelf(pid=30445): Terminating (SIGINT)
10:45:10.418455 run              patchelf(pid=30445): Terminated: ok {rc=0}
10:45:10.448648 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=30442): Process ended prematurely: osmo-stp_10.42.42.5(pid=30442) [trial-2373↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30442)]  [trial-2373↪gprs:trx-lms-limenet-micro↪ping.py:22]
10:45:10.457084 tst                       ping.py:22: Test FAILED (6.2 sec)
10:45:10.516640 run   osmo-hlr_10.42.42.2(pid=30439): ERR: Terminated: ERROR {rc=237}  [trial-2373↪gprs:trx-lms-limenet-micro↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30439)]
10:45:10.565382 run   osmo-hlr_10.42.42.2(pid=30439): stdout: 
| (launched: 2022-12-10_10:45:07.398796) 
10:45:10.615576 run   osmo-hlr_10.42.42.2(pid=30439): stderr: 
| �[0;m�[1;31m20221210104507573 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221210104507573 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221210104507573 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221210104507573 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221210104507573 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221210104507573 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221210104507605 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2373/run.2022-12-10_09-48-07/gprs:trx-lms-limenet-micro/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221210104507616 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210104507616 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210104507616 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
10:45:10.657516 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30438): Terminating (SIGTERM)
10:45:10.697010 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30441): Terminating (SIGTERM)
10:45:10.736222 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30444): Terminating (SIGTERM)
10:45:10.745263 ---      ParallelTerminationStrategy: PID 30438 died...
10:45:10.798140 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30438): Terminated: ok {rc=0}
10:45:10.807573 ---      ParallelTerminationStrategy: PID 30441 died...
10:45:10.860036 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30441): Terminated: ok {rc=0}
10:45:10.869662 ---      ParallelTerminationStrategy: PID 30444 died...
10:45:10.922057 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30444): Terminated: ok {rc=0}
10:45:11.010554 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30442): Process ended prematurely: osmo-stp_10.42.42.5(pid=30442) [trial-2373↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30442)]