Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:sysmo.ping.py (from gprs_sysmo)

Failing for the past 44 builds (Since #2331 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=1423): Process ended prematurely: osmo-stp_10.42.42.5(pid=1423) [trial-2374↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1423)]

Standard Output

----------------------------------------------
trial-2374 gprs:sysmo ping.py
----------------------------------------------
11:21:44.722347 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
11:21:44.734208 tst                       gprs:sysmo: Using 1 x bts (candidates: 1)
11:21:44.867243 tst                          ping.py: using LAC 28041
11:21:44.995102 tst                          ping.py: using RAC 246
11:21:45.125474 tst                          ping.py: using CellId 28041
11:21:45.254447 tst                          ping.py: using BVCI 28042
11:21:45.279415 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
11:21:45.290873 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
11:21:45.302030 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
11:21:45.312825 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
11:21:45.323955 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
11:21:45.334822 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
11:21:45.345959 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
11:21:45.356810 tst                       gprs:sysmo: Using 1 x modem (candidates: 4)
11:21:45.651964 tst                       ping.py:19: start network...
11:21:45.787845 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
11:21:46.352750 run          create_hlr_db(pid=1417): Launched
11:21:46.545287 bus                          /gobi_6: Setting Powered False
11:21:47.563839 run          create_hlr_db(pid=1417): Terminated: ok {rc=0}
11:21:47.974136 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1419): Launched
11:21:48.281751 run    osmo-hlr_10.42.42.2(pid=1420): Launched
11:21:48.397963 run              osmo-stp_10.42.42.5: Starting osmo-stp
11:21:48.931786 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1422): Launched
11:21:49.237001 run    osmo-stp_10.42.42.5(pid=1423): Launched
11:21:49.347387 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
11:21:49.877515 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1425): Launched
11:21:49.985409 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
11:21:50.252252 run               patchelf(pid=1426): Launched
11:21:50.429842 run    osmo-stp_10.42.42.5(pid=1423): ERR: Terminated: ERROR {rc=1}  [trial-2374↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1423)]
11:21:50.559950 run    osmo-stp_10.42.42.5(pid=1423): stdout: 
| (launched: 2022-12-10_11:21:49.085761)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
11:21:50.690277 run    osmo-stp_10.42.42.5(pid=1423): stderr: 
| �[0;m�[38;5;43m20221210112149257 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210112149257 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210112149258 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210112149258 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210112149258 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210112149259 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210112149259 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
11:21:50.815607 run    osmo-stp_10.42.42.5(pid=1423): stdout: 
| (launched: 2022-12-10_11:21:49.085761)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
11:21:50.940022 run    osmo-stp_10.42.42.5(pid=1423): stderr: 
| �[0;m�[38;5;43m20221210112149257 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210112149257 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210112149258 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210112149258 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210112149258 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210112149259 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210112149259 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
11:21:51.084683 run               patchelf(pid=1426): Terminating (SIGINT)
11:21:51.254877 run               patchelf(pid=1426): Terminated: ok {rc=0}
11:21:51.285564 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=1423): Process ended prematurely: osmo-stp_10.42.42.5(pid=1423) [trial-2374↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1423)]  [trial-2374↪gprs:sysmo↪ping.py:22]
11:21:51.294092 tst                       ping.py:22: Test FAILED (6.6 sec)
11:21:51.354513 run    osmo-hlr_10.42.42.2(pid=1420): ERR: Terminated: ERROR {rc=237}  [trial-2374↪gprs:sysmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1420)]
11:21:51.404132 run    osmo-hlr_10.42.42.2(pid=1420): stdout: 
| (launched: 2022-12-10_11:21:48.129428) 
11:21:51.454224 run    osmo-hlr_10.42.42.2(pid=1420): stderr: 
| �[0;m�[1;31m20221210112148306 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221210112148306 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221210112148306 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221210112148306 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221210112148306 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221210112148306 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221210112148318 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2374/run.2022-12-10_11-15-10/gprs:sysmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221210112148329 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210112148330 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210112148330 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
11:21:51.497408 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1419): Terminating (SIGTERM)
11:21:51.538025 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1422): Terminating (SIGTERM)
11:21:51.578353 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1425): Terminating (SIGTERM)
11:21:51.587912 ---      ParallelTerminationStrategy: PID 1419 died...
11:21:51.642163 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1419): Terminated: ok {rc=0}
11:21:51.651789 ---      ParallelTerminationStrategy: PID 1422 died...
11:21:51.705647 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1422): Terminated: ok {rc=0}
11:21:51.715451 ---      ParallelTerminationStrategy: PID 1425 died...
11:21:51.769229 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1425): Terminated: ok {rc=0}
11:21:51.858399 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1423): Process ended prematurely: osmo-stp_10.42.42.5(pid=1423) [trial-2374↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1423)]